《主管工程師競聘演講稿》由會員分享，可在線閱讀，更多相關《主管工程師競聘演講稿（19頁珍藏版）》請在裝配圖網上搜索。

1、1,1,競聘人：,溝通創造財富,競聘崗位：主管工程師,2,簡言 foreword,尊敬的各位領導,各位同仁: 你們好! 首先，感謝公司,感謝各位領導,給我站在這里競聘的機會。 所以在此向各位領導真誠的道一聲:謝謝! 再次，我向各位領導保證：我會加倍努力，為公司的發展奉獻我的青春。 Dear leaders and colleagues: First， I am very appreciating the companyandleadersfor givingmetheopportunitytostandhere. Sincerely, I want to say:thankyou! Secon

2、d，I assure that，I will redouble my efforts, devote my youth to the development of our company .,3,Personal resume,Work summary,The understanding of the position,the analysis of suitability for me and the position,Working assumptions,個人簡歷,工作總結,對競聘崗位的認識,競聘崗位合適度分析,工作設想,目錄contents,4,姓名：年齡：政治面貌：畢業院校：專業：

3、現任職位： 工作年限：資質證書：,name:age : politics status: school of graduation: major: The current position : years of working: Qualification certificate :,個人簡歷 Personal resume,5,優點：,不足：,工作積極認真，細心，有較好的專業技術能力，做事踏實，責任感強，富有團隊溝通合作精神。,性格有點急，不善于表達，容易緊張。,Advantages :,Shortages:,an active, conscientious, careful worker

4、, have good professional and technical ability, strong sense of responsibility, good team communication and cooperation spirit.,short temper ,sometime easy to nervous then can not express my idea logically and clearly.,自我評價 self-evaluation,6,工作總結 Work summary,1、日常點巡檢和設備的維護保養。 一看二聽三摸四記。（看-油質，油溫，運動，滲漏

5、，壓力和報警；聽-泵，油缸，馬達，閥及管路的聲響；摸-溫度，震動；記-設備主要參數和異常）2、突發設備故障分析處理。3、SS改善建議。從去年到現在一共審核通過了5個SS。4、相關培訓。（安全，技術）,1、Daily inspection and equipment maintenance. one watch, two listen, three touch, four write. (watch-oil, temperature, motion , leakage, pressure and alarm; listen-the sound of pump, cylinder, motor ,

6、 valve and pipeline; touch- temperature, vibration; write-major parameter of equipment and abnormal phenomena.)2、Emergency equipment fault analysis and dispose.3、SS Improvement Suggestions .From last year to now, I have finished 5 SS.4、Training (safety, technology ),7,更改的彎管接頭,加坦克鏈保護,加坦克鏈保護,濕部液壓站軟管的爆

7、裂及處理protect wet end hydraulic hose,Increase protect Chain,Change elbow,Increase protect Chain,8,加裝的進出水手閥,改裝的氣控球閥-通過溫度控制其開關,預蒸塔的換熱器旁通改造 heat exchanger bypass improvement,Increaseball valve,Increase pneumatic control valve,9,對競聘崗位的認識 The understanding of the position,10,對競聘崗位的認識 The understanding of t

8、he position,A、Professional knowledge and technical level -Analysis and solve the problem .B、Planning and management ability -Analysis in advance and reasonable plan. C、Communication and coordination ability -Listening、Solidarity 1+12D、Leading and guiding ability-the subordinate colleagues and appoin

9、ting them well 、guidingandmasterspirit.,The position need the following four kinds of ability ：,11,對競聘崗位的認識 The understanding of the position,崗位職責要求：,1、監督、檢查、及時發現故障及隱患，并及時處理、記錄和報告。保證設備運行狀態良好。2、維修計劃的制定和執行。3、維護、更新、分析維修數據以提高維修效率。4、根據現場條件需要，提出設備的改造建議，并組織實施。,The specific duties of the position ：,1、 Super

10、vision ，inspection, found fault and hidden danger promptly, and solving, recording and reporting it timely. Ensure the equipment running in good condition. 2、 EstablishMaintenance Planand ensure thePlan complete in time.3、 Maintain, update, analyze maintenance records to improve the efficiency.4、 Ac

11、cording to site conditions, offer equipment modification Suggestions and organize implementation.,12,對競聘崗位的認識 The understanding of the position,5、備件管理，包括領取、使用、保管備件和工具 。6、組織培訓學習，共同提高。7、完成領導交付的其他任務。,5、 Spare parts management, including getting ,using ,keeping spare parts and tools.6、 Organize the trai

12、ning, improve together. 7、 Accomplish the other tasks assigned by the leaders.,13,競聘崗位合適度分析the analysis of suitability for me and the position,結合崗位職責和自身的特點，我保證會全心全意完成領導交給我的任務,并不斷的提升自己的綜合能力，對自身的不足努力改正。,According to the requirement of the position and my characteristic, Ipromiseto the company Iwill do

13、 the work with heart and soul .I will continue to improve my overall ability and get over my weakness part.,1、崗位要求的四種能力，基本都能符合要求。,1 、I am qualified with the requirements of the position.,personal advantage,現在自己的優點：,14,競聘崗位合適度分析Position fits analysis,2、有豐富的工作經驗。除了在我們公司近3年的液壓技術員工作經驗外,在原來單位有近3年的生產裝配、售后

14、服務、產品設計工作經驗。主要工作是：根據客戶現場情況及對產品的功能、工藝要求，進行產品的方案協商和設計工作（標記機、加注機產品和其他非標設備的設計）；并多次出差到全國各地的汽車廠進行設備調試，改造工作。如：北汽福田設計院的加注機加注槍方案整改、設計，南京長安汽車有限公司的進口冷媒加注機的改造方案協商，臺州吉奧汽車的真空加注槍設計，保定長城的車身標記機工裝設計等工作。2、 Rich work experience In addition to nearly 3 years work experience in our company as a hydraulic technician .Also

15、 I have nearly 3 years working experience in equipment manufacturing, after-sales service and product design. The main work is: according to customers requirements to consult scheme and design. Testing and improving equipment on business trip to auto plants across the country many times. Eg. I did t

16、he improvement of filling gun (a part of filling machine) in Foton motor co., LTD, designed marking machine in Bao Ding Great Wall, and so on.,2、有豐富的工作經驗。 除了在我們公司近3年的液壓技術員工作經驗外,在原來單位有近3年的生產裝配、售后服務、產品設計工作經驗。主要工作是：根據客戶現場情況及對產品的功能、工藝要求，進行產品的方案協商和設計工作（標記機、加注機產品和其他非標設備的設計）；并多次出差到全國各地的汽車廠進行設備調試，改造工作。如：北汽福

17、田設計院的加注機加注槍方案整改、設計，南京長安汽車有限公司的進口冷媒加注機的改造方案協商，臺州吉奧汽車的真空加注槍設計，保定長城的車身標記機工裝設計等工作。,2、 Rich work experience In addition to nearly 3 years work experience in our company as a hydraulic technician .Also I have nearly 3 years working experience in equipment manufacturing, after-sales service and product des

18、ign. The main work is: according to customers requirements to consult scheme and design. Testing and improving equipment on business trip to auto plants across the country many times. Eg. I did the improvement of filling gun (a part of filling machine) in Foton motor co., LTD, designed marking machi

19、ne in Bao Ding Great Wall, and so on.,15,高效的團隊an effective team,一、協助領導創建一個高效的團隊。One，assist the leaders to create an effective team.,工作設想Working assumptions,16,工作設想Working assumptions,二、理論聯系實際，把所學到的知識運用到工作之中，做好PDCA循環，即計劃、布置、檢查、落實；Two，Theorywithpractice,theapplicationoflearnedknowledge towork, makethe

20、PDCAcycle, means: plan, do, check, action .,計劃plan,檢查check,落實action,布置do,17,工作設想Working assumptions,三、做好三種轉變，減少突發事故的發生Three ，in order to reduce the occurrence of accident, do three kinds of transformation,18,工作設想Working assumptions,四、揚長去短、發奮工作、攻克艱難，不斷加強個人修養，自覺加強專業知識的學習，努力提高職業素養。引用一句格言：思路決定出路、觀念決定方向、

21、性格決定命運、細節決定成敗、態度決定一切；Four ，let us make best use of the advantages and bypass the disadvantages,hardwork,overcome difficulties, continue to improve personal technology level and quality . There is a maxim: Idea determines the way out, conception determines the direction, character determines the fate, the detail determines success or failure, attitude determines everything.,19,Thanks !,