喜歡就充值下載吧。。。。。資料目錄下的全部文件，，下載了全部有的哦。。。。。有疑問咨詢QQ:3278627871

萬向節滑動叉機加工藝及工裝設計 學生姓名：伍峰 班 級：05031318 指導老師：焦益群 摘要: 萬向節滑動叉位于傳動軸的端部。它的主要作用：一是傳遞扭矩，使汽車獲得前進的動力；二是當汽車后橋鋼板彈簧處在不同的狀態時，由本零件可以調整傳動軸的長短及其位置。零件的兩個叉頭部位上有兩個孔，用以安裝滾針軸承并與十字軸相連，起萬向聯軸節的作用。零件上的花鍵孔與傳動軸端部的花鍵軸相配合，用于傳遞動力之用。 本設計主要編制該零件的機械加工工藝規程，并設計其中一道工序的專用夾具，并撰寫設計說明書。此次設計培養了我熟悉并運用有關手冊、規范、圖表等技術資料的能力。進一步鍛煉了我識圖、制圖、運算、編寫技術文件和操作CAD等基本能力。 關鍵詞：萬向節 滑動叉 工藝 專用夾具 指導老師簽名: Sliding universal joint cross machine technology and tooling design Student name: Wu Feng Class: 050313 Supervisor: Jiao Yiqun Abstract: Fork sliding universal joints at the end of the shaft. Its main roles: First, transfer torque to the driving force for car access to move forward; second is when the vehicle rear axle leaf spring in a different state, the parts can be adjusted by the length of shaft and its location. Parts the first part of the two forks, there are two holes for the installation of needle bearings and connected with the cross-axis, since the role of universal coupling. Parts of the spline hole and the shaft end of the spline shaft of it, for power transmission purposes. The design of the main components of the preparation of the machining process planning and design processes in which a special fixture to work together and write a design specification. The design of the training I am familiar with and use of the manual, specification, diagrams and other technical information. Further training of my knowledge map, drawing, calculations, preparation of technical documents and the basic ability to operate CAD. Key words: gimbal sliding forks craft special fixture Signature of supervisor: