喜歡就充值下載吧。。。資源目錄里展示的全都有，，下載后全都有，，圖紙均為高清圖，，CAD圖紙可自行編輯，，有疑問咨詢QQ:1064457796
圓筒沖壓工藝及模具設計
摘要： 本設計設計的是筒形件的落料拉深復合模，首先根據計算來確定拉深次數，通過查資料計算修邊余量、拉深毛坯直徑等。通過對沖壓力計算來初選壓力機，對工件的零件、模具工作部分（如凸凹模、拉深凸模、落料凹模等）和模具的整體設計來確定模架，最后選擇中間導柱模架。對壓力機和模具校核后來確定壓力機。
本次設計的主要內容為：工件的工藝性分析、沖壓工藝方案的確定、模具的技術要求和材料選用。主要尺寸計算、工作部分尺寸計算、模具整體設計和主要零部件結構設計、模具裝配和模具總裝圖。
關鍵詞：模具，復合模，壓力機，拉深
Cylindrical stamping process and die design
Abstract: this design is design of cylindrical parts blanking deep drawing composite modulus, first of all, according to the calculation to determine the number of deep drawing, trimming allowance by check information calculation and drawing blank diameter, etc. Primary press through hedge pressure calculation, parts, mould work part of the workpiece (such as intensive, drawing punch, blanking die, etc.) and the integral design of the mould to determine the die set, finally choose the middle column formwork. The press and die check later determined press.
The main content of this design is: the artifact's manufacturability analysis, the scheme determination of stamping process and die technical requirements and material selection. Main size calculation, working part size calculation, die major parts of the overall design and structure design, mold assembly and mold assembly drawing.
Keywords: die，drawing，compound，die，press
I