喜歡就充值下載吧。。。資源目錄里展示的全都有，，下載后全都有，，圖紙均為高清圖，，CAD圖紙可自行編輯，，有疑問咨詢QQ:1064457796
型彎曲件的沖壓工藝及模具設計
摘要：本設計題目為型彎曲模設計，體現了典型型彎曲模的設計要求、內容及方向，有一定的設計意義。通過對該零件模具的設計，進一步加強了設計者彎曲模設計的基礎知識，為設計更復雜的彎曲模具做好了鋪墊和吸取了更深刻的經驗。
本設計運用彎曲成型工藝及模具設計的基礎知識，首先分析了板材的性能要求，為選取模具的類型做好了準備；然后計算了彎曲件的彎曲力，便于選取壓力機噸位及確定壓力機型號；最后分析了彎曲件的特征，確定模具的設計參數、設計要點及頂出裝置的選取。
本設計采用了八字?jǐn)[塊復合模成型型件。復合模具有生產效率高，制件精度高等特點，特別適合大批量高精度生產。成型原理可劃分為兩個階段：首先，凸模與凹模共同作用成型U形件；凹模繼續下行，迫使擺塊左右擺動動作，U型件被再次彎曲成型，最后成型型件，這種機構動作靈活可靠，設計方便，非常適合在本副模具中使用。
關鍵詞：彎曲模 ， 凸模 ， 凹模 ， 擺塊
TYPE BENDING PARTS STAMPING PROCESS AND DIE DESIGN
Abstract：This design topic is a type of bending die design, embodies the typical type of bending die design requirements, the content and direction, has a certain meaning of design.Based on the parts, mold design to further strengthen the foundation of the designers bending die design knowledge, has laid a good groundwork for the design of bending die with more complex and gain a more profound experience.
This design using the basic knowledge of bending forming technology and die design, analyzes the performance requirements of the plate, ready for the selection of mold types;
Then calculated the bending force of bending parts, easy to choose press tonnage and determine the press type;In the final analysis the characteristics of bending parts, mold design parameters, key points of design and selection of ejection device.
This design USES the figure of eight pendulum block type compound die.Composite mould has high production efficiency, high precision parts, especially suitable for mass production and high precision.Forming principle can be divided into two stages: first, the combination of convex and concave die shape U;Die to continue downward, forced the pendulum swinging movements, u-shaped bent by forming again, finally forming parts, this kind of agency action is flexible and reliable, convenient design, very suitable for use in the vice mould.
Keywords: bending punch die set piece
目 錄
1 緒 論 1
1.1國內模具的現狀和發展趨勢 1
1.1.1國內模具的現狀 1
1.1.2 國內模具的發展趨勢 1
1.2 國外模具的現狀和發展趨勢 2
1.3 支架模具設計與制造方面 2
1.3.1 支架模具設計的設計思路 2
1.3.2支架模具設計的進度 3
2 彎曲件工藝性分析及方案的確定 4
2.1彎曲件工藝性分析 4
2.2工藝方案的確定 4
2.3彎曲件工藝方案分析 7
3、主要設計計算 8
3.1主要設計計算 8
3.1.1彎曲件毛坯坯料尺寸計算 8
3.1.2 彎曲應力的計算 9
3.1.3 圧料力計算 9
3.1.4 壓力機公稱壓力的確定 9
3.2彎曲模工作部分尺寸的設計 10
3.2.1凸模圓角半徑設計 10
3.2.2 凹模圓角半徑 10
3.2.4 凸、凹模間隙計算 11
3.3 U形彎曲凹凸模橫向尺寸的設計 12
3.4 彈簧的選用 13
3.4.1每個彈簧力計算 13
3.4.2彈簧預壓縮量 14
3.4.3彈簧校核 14
4 模具類型的選擇 15
4.1 模具結構選擇 15
4.2定位方式的選擇 16
4.3出件方式的設計 16
5 主要零件的設計 17
5.1工件零部件的結構設計 17
5.1.1凸模的結構草圖如下圖所示： 17
5.1.2凸模主要尺寸的計算 17
5.2凹模的結構設計 19
5.2.1凹模主要尺寸的設計 19
5.3.2擺塊的主要尺寸設計 20
5.4定位零件的設計 21
5.4.1限位釘?shù)脑O(shè)計 21
5.5定位塊的設計 22
5.6彈頂部件的設計 23
5.6.1墊片的設計 23
5.6.2導板的設計 23
6 壓力機的參數與比較 24
7 模具零件的加工工藝 25
7.1凸模的加工工藝過程 25
7.2凹模的加工工藝過程 25
8 模具的裝配 27
9 模具試沖 28
設計小結 29
致謝 30
參考文獻 31
III