臥式螺旋卸料沉降離心機設計【含CAD圖紙、說明書】,含CAD圖紙、說明書,臥式,螺旋,卸料,沉降,離心機,設計,cad,圖紙,說明書,仿單 關鍵詞：臥式螺旋卸料沉降離心機 磁性材料 濕法生產 摘要 離心機是利用離心力，分離液體與固體顆?；蛞后w與液體的混合物中各組分的機械。 離心機主要用于將懸浮液中的固體顆粒與液體分開；或?qū)⑷闈嵋褐袃煞N密度不同，又互不相溶的液體分開(例如從牛奶中分離出奶油)；它也可用于排除濕固體中的液體，例如用洗衣機甩干濕衣服；特殊的超速管式分離機還可分離不同密度的氣體混合物；利用不同密度或粒度的固體顆粒在液體中沉降速度不同的特點，有的沉降離心機還可對固體顆粒按密度或粒度進行分級。本設計通過計算和校核，設計一個臥式螺旋卸料沉降離心機，用以對磁性材料的濕法加工進行物料篩選分離，滿足該工藝流程中的要求。 Key Words: Screw Conveyor of Decanter Cenrtiufge, Wet magnetic，materials production Abstract Centrifuge is the use of centrifugal force to separate liquid and solid particles or liquid mixtures and liquid components of the machinery. Centrifuges will be mainly used for suspension of solid particles and liquid separately; or emulsion density of two different and separate from each other dissolving liquids (for example, isolated from butter milk); it can also be used to excluded from the wet solid in the liquid, such as washing clothes and dry off; special separator tube speed can also be separated from gas mixtures of different densities; the use of different density or particle size of solid particles in the liquid velocity different characteristics, there are centrifuges can also be the settlement of solid particles by density or particle size classification. By calculating the design and verification, the design of a horizontal spiral centrifuge discharge settlement to the wet processing of magnetic screening material separation, to meet the requirements of the process. 目錄 1 緒論 1 1.1 磁性材料 1 1.1.1 磁性材料的發展 1 1.1.2 磁性材料的生產工藝 5 1.2 離心機的概況 6 1.2.1 離心機的應用及其發展 7 1.2.2 離心機的分類 8 1.2.3 螺旋卸料沉降式離心機國內外研究現狀 8 1.2.4 螺旋卸料沉降式離心機的概況 10 1.2.5 臥螺離心機的主要優點 11 1.2.6 臥旋離心機的主要缺點 11 2 臥式螺旋卸料沉降離心機的生產能力計算 12 2.1 生產能力概述 13 2.2 生產能力計算 13 3 臥式螺旋卸料沉降離心機的功率計算與電機選擇 16 3.1 功率計算 17 3.1.1 啟動轉鼓等轉動件所需功率 17 3.1.2 啟動物料達到操作轉速所需功率 20 3.1.3 螺旋輸送沉渣所需功率 21 3.2 電機選擇 22 4 V帶設計計算 23 4.1 帶動轉鼓的V帶設計計算 25 4.2 帶動螺旋輸送器的V帶設計計算 28 5 轉鼓壁的厚度校核 29 6 擺線針輪差速器設計計算 33 5.1 擺線針輪差速器概述 30 5.2 擺線針輪行星差速器個參數的確定 32 5.3 擺線針輪差速器輸入軸與輸出軸的設計計算 45 7 離心機的日常保養 46 參考文獻 47 致謝 49