喜歡就充值下載吧。。。資源目錄里展示的全都有，，下載后全都有，所見即所得，CAD圖紙均為高清圖可自行編輯，文檔WORD都可以自己編輯的哦，有疑問咨詢QQ:1064457796,,,課題后的【XX系列】為整理分類用，與內容無關，請忽視
第IV頁
遼寧科技大學本科生畢業設計
裝卸工件機械手設計
摘 要
工業機器人自本世紀60年代初問世以來，已有80萬余臺用于世界各國的自動化生產線上，扮演著靈巧自如、不知疲倦“操作者”的角色，替代生產工人出色的完成極其繁重、復雜、精密或者充滿著危險的各種各樣的工作。不同用途的工業機器人正在工業生產中起到其它機器無法替代的作用。一般機器人由基座、腰、臂、腕和手五部分組成。腰和臂控制手的空間位置，腕控制手的空間姿態，而手則是實現對操作物體的抓放。本文設計的是裝卸工件機械手，根據設計要求本文制定了一個由液壓系統控制夾爪松開、夾緊物體的設計方案，對手部、腕部及整體的結構進行了設計，同時對其主要零部件進行了選擇、設計和計算，內容包括液壓系統的設計計算，軸的設計和校核，對設計的液壓控制系統進行了分析與編程等。通過分析計算可以得出結論，此次設計基本滿足設計要求。
關鍵詞：裝卸;工業機器人；機械手
The design of the manipulator for loading and unloading workpiece
Abstract
Since the beginning of 1960s, more than 800000 industrial robots have been used on automatic production lines of many countries all over the world, playing a role dexterous and as a free “operator” who has no sense of tireness. It can also accomplish various works that are very arduous and complicated or even full of danger instead of workers. The different application of industry robots to industrial production is playing an important role of which other machines are unable to take the place. The common robot basically consists of the waist, the arm, the wrist and the hand. Waist and arm control space position, while wrist controls special attitude, and the hand is used to realize grasping or putting objects. The design of this article is the mechanical arm of loading and unloading workpiece. According to the design requirements a schematic design has been developed with a hydraulic system controlling the claws from releasing and clamping objects, also it has been carried on the design to the structure of the hand, the wrist, and the whole. The contents including the selection of prime movers, design and check of gears, belts, and axes, the economic analysis to the feasibility of design proposal. Conclusions can be drawn through the computational analysis and this design can by and large meet the needs of the design request.
Key words：load and unload；Industrial robot ;manipulator
目錄
1 緒論 1
1.1 選題的背景、目的和意義 1
1.2 機器人的發展概況 2
1.2.1 機器人的定義 2
1.2.3 國內機器人研究狀況 4
1.2.4 國外機器人的最新發展 5
1.2.5 機器人目前研究熱點及發展趨勢 6
2手指部分的設計與計算 8
2.1夾緊機構的類型 8
2.2信息傳感器 8
2.2.1內部信息傳感器 9
2.2.2外部信息傳感器 9
2.3液壓傳動的設計計算 10
2.3.1手爪夾緊液壓傳動的設計計算 11
2.3.2手爪回轉液壓傳動的設計計算 12
2.4夾緊力的計算 14
2.4.1液壓缸產生的推力及運動速度 14
2.4.2夾緊力的計算 16
3手腕部分的設計與計算 19
3.1確定油缸的工作壓力 19
3.2確定經油缸的流量 19
3.3確定油泵所需電機功率 19
3.4液壓缸的輸出扭矩計算 20
4手臂部分的設計與計算 22
4.1手臂的作用和組成 22
4.2對設計手臂的要求 22
4.3手臂的結構 23
4.4手臂的設計計算 23
4.4.1確定油剛工作壓力 23
4.4.2驅動力的設計計算 24
4.4.3偏重力矩的設計計算 26
5.機身的設計與計算 29
5.1機身升降液壓轉動的設計計算 29
5.1.1確定油缸的工作壓力 29
5.1.2確定經油缸的流量 29
5.1.3確定油泵所需電機功率 29
5.1.4液壓泵的校核 30
5.1.5活塞桿強度和穩定性校核 32
5.2機身回轉液壓轉動的設計計算 33
5.2.1確定油缸的工作壓力 33
5.2.2確定經油缸的流量 33
5.2.3確定油泵所需電機功率 34
5.2.4液壓缸的扭矩計算 34
6.PLC控制 36
6.1PLC實現的功能 36
6.2PLC控制電路接線圖 36
6.3PLC輸入（I/O）點數的分配 37
6.4PLC輸出（I/O）點數的分配 38
6.5PLC控制梯形圖 38
6.5程序調試 42
6.5.1主程序調試 42
6.5.2手動操作子程序調試 42
6.5.3自動運行子程序調試 43
結論 44
致謝 45
參考文獻 46