喜歡就充值下載吧。。。資源目錄里展示的全都有，，下載后全都有,,請放心下載，原稿可自行編輯修改=====================喜歡就充值下載吧。。。資源目錄里展示的全都有，，下載后全都有,,請放心下載，原稿可自行編輯修改=====================喜歡就充值下載吧。。。資源目錄里展示的全都有，，下載后全都有,,請放心下載，原稿可自行編輯修改=====================
題 目:
ZL60輪式反轉六連桿裝載機
工作裝置設計
摘 要
裝載機是工程機械的主要機種之一，主要用于公路、鐵路、建筑、水電、港口、礦山等建設工程的土石方施工。它具有重量輕、機動靈活、效率高、維修方便等特點；它既可進行鏟裝作業，又可用作短途運輸。對于加快工程建設速度，減輕勞動強度，提高工程質量，降低工程成本都發揮著重要的作用。裝載機的工作裝置對于裝載機來說是重中之重，所以工作裝置的設計好壞直接影響到裝載機的使用壽命以及工作效率等。
這次設計采用先進的現代設計方法，對這種輪式裝載機的工作裝置進行了總體設計到零部件設計。主要包括輪式裝載機工作裝置的關鍵零部件，如鏟斗、連桿機構以及轉斗油缸、舉升油缸等，并對重要零件進行了剛度、強度分析。應用UG軟件對輪式裝載機工作裝置整體進行設計，并用它對本次設計進行立體展示表達。在設計過程中，必須使工作裝置運動平穩、無干涉、無死點、無自鎖、有足夠的強度；動臂從最底位置到最大卸載高度的舉升過程中，保證鏟斗中物料不灑落；在卸載后，動臂下放至鏟掘位置鏟斗能自動放平。
關鍵字：3.3m3斗容；輪式裝載機；反轉六連桿機構；工作裝置；強度校核
Abstract
As one of the main types of construction machinery, loader is mainly used for earthwork construction of highway, railway, building, hydropower, port, mine and other construction projects. Characterized by light weight, flexibility, high efficiency and convenient maintenance, it can not only carry out scooping but also be used for short-distance transportation, as well as plays an important role in speeding up the engineering construction, reducing labor intensity, improving the quality of the project and reducing the cost of the project. For a loader, the working device is the most important, therefore, the design of the working device directly affects the life length and efficiency of a load.
The design of the modern use of advanced design methods, wheel loaders working on such a device design to design components. It mainly includes key parts of wheel loader's working device, such as bucket, link mechanism, rotary bucket cylinder and lifting cylinder etc., and the rigidity and strength of key parts are analyzed. Application of UG software installed on the wheel loader work for the overall design and its use of this design three-dimensional display of expression. In the process of design, the working device must be worked smoothly without interference, dead spot or self-lock and with sufficient strength. During the lifting process of boom from the bottom to the maximum uninstall height, the material in the bucket must be ensured not to spill out, and the bucket can be leveled down automatically when the boom is lowered to the digging position after unloading.
Key words: 3.3m3 bucket capacity; Wheel loader; Reversing six-bar mechanism; Working device; Strength checking
..
目 錄
第1章 緒 論 1
1.1 裝載機概述 1
1.2 裝載機應用技術發展 1
1.2.1 國外裝載機發展現狀 1
1.2.2 國外裝載機發展趨勢 1
1.2.3 國內裝載機發展現狀 1
1.2.4 國內裝載機發展趨勢 2
第2章 裝載機工作裝置總體設計 3
2.1 工作裝置的總體結構與布置 3
2.2 工作裝置連桿機構的結構形式與特點 3
2.3 工作裝置自由度的計算 5
第3章 裝載機工作裝置設計 7
3.1 鏟斗設計 7
3.1.1 鏟斗的結構形式 7
3.1.2 鏟斗斷面形狀和基本參數確定 8
3.1.3 鏟斗容量的計算 10
3.2 工作裝置連桿系統設計 12
3.2.1 機構分析 12
3.2.2 尺寸參數設計 13
3.3 工作裝置靜力學分析 21
3.3.1 外載荷確定原則 21
3.3.2 鏟斗形心的確定 21
3.3.3 外載荷的計算 25
3.4 工作機構的受力分析與計算 28
3.4.1 裝載機的幾種工況 28
3.4.2 聯合鏟裝時的受力分析 28
3.4.3 工作機構主要零件的強度計算及液壓缸的確定 32
3.4.4 搖臂及連桿的計算 34
3.4.5 關于潤滑 42
第4章 UG軟件的應用 45
4.1 仿真和優化 45
4.2 零件設計 46
4.3 產品設計 48
第5章 實體模型的制作 51
總 結 53
附 錄 55
參考文獻 57
致 謝 59