喜歡這個資料需要的話就充值下載吧。。。資源目錄里展示的全都有預覽可以查看的噢，，下載就有,,請放心下載，原稿可自行編輯修改=【QQ：11970985 可咨詢交流】====================喜歡就充值下載吧。。。資源目錄里展示的全都有，，下載后全都有,,請放心下載，原稿可自行編輯修改=【QQ：197216396 可咨詢交流】====================
摘 要
對機械式雙頭套皮輥機進行了研究，它的目的主要是完成整臺機器的生產，提高生產效率，可以同時完成多個皮輥的壓入和套出?？梢詫⑵ぽ仚C(jī)做成雙套頂頭和定位架供工人操作，它的工作原理是由電機帶動蝸輪、蝸桿轉動，使絲桿升降、帶動橫臂升降，從而使滑桿上下移動，實現皮輥的套入、壓出。采用這個可以大大降低工作人員的勞動負荷。皮輥機主要通過帶傳動、齒輪傳動、蝸桿蝸輪傳動和絲桿傳動來實現傳動。完成了傳動箱的箱體、傳動箱附件、絲桿及搖臂的設計。
關鍵詞 油標 軸承 蝸輪蝸桿 帶輪
Abstract
double sets of mechanical roller machine is studied, its main purpose is to complete the whole machine production, improve production efficiency, press in and out can be completed at the same time a plurality of roller. Paper roll machine can be made into double sleeve head and frame for workers to operate, its working principle is driven by a motor, worm, worm rotation, the screw rod lifting, arm-led take-off and landing, so that the slider up and down movement, realize the sleeve, press roller. This can greatly reduce the workload of staff. Roller machine mainly through the belt drive, gear drive, worm and worm wheel and screw drive to achieve transmission. Completed the design of gear box, gear box, the box body attachment screw rod and rocker arm.
Keywords： standard oil bearing worm pulley
目 錄
摘要…………………………………………………………………………3
0.前言………………………………………………………………………4
1.總體設計…………………………………………………………………5
2.傳動方案設計……………………………………………………………6
2.1電動機的選擇…………………………………………………………6
2.1.1傳動參數計算………………………………………………………6
2.1.2確定電動機功率及其它參數………………………………………7
2.2蝸輪、蝸桿的設計……………………………………………………8
2.2.1傳動參數計算………………………………………………………8
2.2.2材料選擇……………………………………………………………9
2.2.3參數計算……………………………………………………………9
2.3軸的設計………………………………………………………………11
2.3.1軸的材料及選擇……………………………………………………12
2.3.2軸的強度計算………………………………………………………13
2.4軸承的選擇……………………………………………………………16
2.5V帶及帶輪的設計………………………………………………………17
2.5.1普通V帶傳動的設計…………………………………………………17
2.5.2帶輪設計………………………………………………………………19
3.傳動箱的箱體設計…………………………………………………………20
3.1箱體的結構型式……………………………………………………………20
3.2鑄造箱體的結構分析………………………………………………………21
3.3箱體的結構尺寸……………………………………………………………21
4.傳動箱附件的設計……………………………………………………………21
4.1軸承蓋………………………………………………………………………21
4.2軸承套杯……………………………………………………………………23
4.3調整墊片組…………………………………………………………………23
4.4油標…………………………………………………………………………23
4.5排油孔螺塞…………………………………………………………………23
5.總機體的設計…………………………………………………………………23
6.導軌及間隙調整裝置設計……………………………………………………24
6.1導軌設計……………………………………………………………………24
6.2間隙調整裝置設計…………………………………………………………24
7.傳動絲桿及橫臂設計…………………………………………………………25
7.1絲桿設計……………………………………………………………………25
7.2橫臂設計……………………………………………………………………25
8.潤滑的選擇……………………………………………………………………25
8.1潤滑的作用…………………………………………………………………25
8.2潤滑系統和方法的分類……………………………………………………26
8.3潤滑系統的選擇原則………………………………………………………26
9.其它……………………………………………………………………………26
9.1支角…………………………………………………………………………26
9.2行程開關的選擇……………………………………………………………27
10.結論…………………………………………………………………………27
11小結…………………………………………………………………………28
12參考文獻……………………………………………………………………29
12附錄…………………………………………………………………………30
4