喜歡這套資料就充值下載吧。。。資源目錄里展示的都可在線預覽哦。。。下載后都有，，請放心下載，，文件全都包含在內，，【有疑問咨詢QQ:1064457796 或 1304139763】
============================================喜歡這套資料就充值下載吧。。。資源目錄里展示的都可在線預覽哦。。。下載后都有，，請放心下載，，文件全都包含在內，，【有疑問咨詢QQ:1064457796 或 1304139763】
============================================
吊耳加強板零件沖壓工藝與沖模設計
學生姓名：任云 班級：0781053
指導老師：陳為國
摘要：隨著科學技術的進步和工業生產的迅速發展，沖壓加工技術的應用越來越廣泛，模具成形已成為當代工業生產的重要手段。
本設計以吊耳加強板零件沖壓工藝與沖模設計的全過程，通過審查及工藝分析確定其為單工序模。然后再對此單工序模進行整體設計，在此過程中，凸凹模的設計為一難點，主要的是刃口的計算及定位方式的選擇問題，然后再利用得出的數據結合有關的參考資料和圖表，對模具的主要零件進行結構設計，最后根據全部零件的結構設計選用合適的模座和模柄，并選用合適的沖壓設備，最后，畫出沖裁模的總裝圖和零件圖，在繪圖過程中，使用的軟件為Auto CAD。
關鍵詞：沖壓工藝 沖模設計 沖裁模
指導老師簽名：
Lifting lugs reinforcing plate stamping parts stamping process and design
student's name: RenYun class: 0781053
supervisor：: ChenWeiGuo
Abstract: with the development of science and technology and the rapid development of industrial production, stamping processing technology used more widely, die forming has become an important means of modern industrial production.
This design to lug reinforcing plate stamping parts stamping process and design process of examining and process analysis, determine the single procedure mode. Then again for a single process modules overall design, in this process, the design of die and punch for a difficulty, main is rigid the calculation and positioning the choice of the ways of problems, then reuse concluded data by combining relevant reference material and graphs, the main parts of mould structure design, according to all parts of the structure design chooses appropriate mould seat and die, and selects the appropriate handle pressing equipment, finally, draw the punch die final assembly figure and parts graph, in a drawing process, USES a software for Auto CAD.
Keywords: stamping process mould design punch mould
Signature of supervisor: