喜歡這套資料就充值下載吧。。。資源目錄里展示的都可在線預覽哦。。。下載后都有，，請放心下載，，文件全都包含在內，，【有疑問咨詢QQ:414951605 或 1304139763】
摘 要
槽輪機構是一種步進間歇運動機構，由于結構簡單、制造容易、工作可靠,能準確地控制轉角, 機械效率高, 所以在自動和半自動生產線中得到廣泛的應用;但槽輪在銷軸進出槽輪槽口時加速度大,機構產生較大的沖擊,而且隨著轉速的增加和槽輪槽數的減少?zèng)_擊加劇，因而不適用于高速運轉的情況。
本設計以槽數4 、銷輪和槽輪中心距33 mm、銷軸半徑2 mm、銑刀半徑2mm 為例，設計槽槽輪機構，并對槽輪的運動特性進行分析。采用CAM技術對槽輪和撥盤進行數控編程，對零件進行工藝分析，確定刀具和切削用量，最后形成NC指令。
關鍵詞：槽輪機構 工藝 數控編程 NC
Abstract
Geneva agencies is stepping intermittent movement，because of Simple structure、manufacturing easy、reliable，Can accurately control angle, High mechanical efficiency，Therefore, automatic and semi-automatic production line is widely used; But trough round slot in the round pin and out of the acceleration when Passage，Institutions have a greater impact，moreover, with the speed and the increase in the number of slot groove round of intensified to reduce the impact，Thus does not apply to high-speed operation
My Design is take 4 to trough, and trough round pin round of 33 mm center distance, pin radius of 2 mm, 2 mm radius cutter for example, Design groove grooved wheel agencies, and the movement of tank rounds analysis. Using CAM technology to dial tank round and NC Programming, Process analysis of the parts, Cutting Tool and determine the amount, finally formed NC order.
Keywords: Geneva agencies Technology NC Programming NC
1