喜歡這套資料就充值下載吧。。。資源目錄里展示的都可在線預覽哦。。。下載后都有，，請放心下載，，文件全都包含在內，，【有疑問咨詢QQ:414951605 或 1304139763】
喜歡這套資料就充值下載吧。。。資源目錄里展示的都可在線預覽哦。。。下載后都有，，請放心下載，，文件全都包含在內，，【有疑問咨詢QQ:414951605 或 1304139763】
目 錄
摘要…………………………………………………………………………………………3
第一章 緒論 ……………………………………………………………………………3
1.1 空作業車的的現狀和發展趨勢…………………………………………………6
1.2 課題的來源和意義………………………………………………………………8
第二章 液壓系統設計 …………………………………………………………………9
2.1 本參數及主要技術性能指標 …………………………………………………9
2.1.1 行駛狀態主要技術參數 …………………………………………………9
2.1.2 作業狀態主要技術參數 …………………………………………………9
2.1.3 作業車平臺作業工作狀態圖 ……………………………………………9
2.1.4 機構簡述 …………………………………………………………………11
2.2 液壓系統的構成…………………………………………………………………13
2.3 各系統工作原理簡述……………………………………………………………13
2.4 主要機構液壓回路的設計與分析………………………………………………14
2.4.1 升機構的回路設計 ………………………………………………………14
2.4.2 伸縮機構回路設計 ………………………………………………………16
2.4.3 回轉機構回路設計 ………………………………………………………17
2.4.4 變幅機構回路設計 ………………………………………………………17
2.4.5 整體液壓回路設計 ………………………………………………………18
2.5 主要液壓元?dú)饧倪x擇與計算…………………………………………………20
2.5.1 液壓泵的確定 ……………………………………………………………20
2.5.2 上下臂液壓缸確定 ………………………………………………………21
2.5.3 液壓馬達選擇 ……………………………………………………………23
2.5.4 換向閥的選擇 ……………………………………………………………24
2.5.5 油箱有效容的積確定 ……………………………………………………25
第三章 電氣控制系統設計 ……………………………………………………………26
3.1 電氣控制方案的確定 …………………………………………………………26
3.1.1 高空作業機構的電氣控制電路 …………………………………………26
3.1.2 通訊裝置 …………………………………………………………………27
3.1.3 選擇開關裝置 ……………………………………………………………27
3.1.4 總的控制電路 ……………………………………………………………27
3.2 電氣元器件的選擇 ……………………………………………………………28
3.2.1 按鈕的選用 ………………………………………………………………28
3.2.2 行程開關的選用 …………………………………………………………30
3.2.3 熱繼電器的選用 …………………………………………………………30
3.2.4 熔斷器的選用 ……………………………………………………………30
3.2.5 電線的選擇 ………………………………………………………………31
3.2.6 照明電器選擇 ……………………………………………………………31
3.2.7 變壓器的選擇 ……………………………………………………………32
第四章 電氣控制面板的操作……………………………………………………………33
4.1 轉臺處控制箱操作面板及其操作件介紹………………………………………33
4.2 平臺（吊籃）控制箱操作面板及操作元件……………………………………34
4.3 高空作業電氣部分操作方法……………………………………………………35
4.4 高空作業操作中注意事項………………………………………………………35
附錄…………………………………………………………………………………………37
附錄1 …………………………………………………………………………………37
附錄2 …………………………………………………………………………………37
附錄3 …………………………………………………………………………………39
附錄4 …………………………………………………………………………………39
附錄5 …………………………………………………………………………………40
結論…………………………………………………………………………………………42
后記…………………………………………………………………………………………43
參考文獻……………………………………………………………………………………44
GKZ高空作業車液壓和電氣控制系統設計
摘 要
高空作業車廣泛用于建筑、市政、機場、工廠、園林、住宅等場所，從事消防、搶險救災、安裝、維護等工作。本文針對徐州海倫哲工程機械有限公司GKZ14型高空作業車，進行了大量的理論研究和實驗測試。
本設計是對該車的重要組成部分----液壓系統和電氣控制系統進行設計和研究，其液壓系統由上車液壓系統和下車液壓系統組成。兩者之間由中心回轉接頭連接(垂直升降式高空車除外),上車液壓系統由變幅系統、伸縮系統和回轉系統三個基本系統組成。在整個液壓系統設計中，采用制動器控制克服了液壓馬達存在內泄而平衡閥不能鎖住停在空中的重物，使重物可靠地停在空中。制動器采用恒壓外控，可以進一步降低平衡閥的開啟壓力，提高回路效率。
從安全性、可靠性角度看，高空車不同于一般的工程機械, 其特點是作業頻率不高, 負荷較小, 但要求安全性, 可靠性較高。因此, 高空車應具備緊急停止裝置。高空車在各執行機構動作的終點位置設限位裝置, 尤其是對于折疊臂式及混合臂式的高空車應設中臂限位裝置, 以確保整車的穩定性。高空車的變幅系統和伸縮系統的速度必須加以控制, 以防止產生“超速”現象。
因此，為保證高空作業車的工作穩定、可靠、安全，作業靈活，效率高，設計出優良的液壓系統和電氣控制系統就顯得尤為重要。
[關鍵詞]：高空作業車；制動器；內泄；恒壓外控；限位裝置。
Hydraulic and electricity control system design of the high-altitude working machine
Abstract
The high-altitude working machine has been widely used in architecture, city planning, airport, factory, garden, house and other place. It plays an important role in fire protection, dealing with an emergency, construction, installation, maintenance and so on. Aiming at the GKZ14 high-altitude working machine of XhZhou HaiLun machinery Group, It does a lot of theoretical research and experiment test.
This design is carries on the design and the research to this vehicleimportant constituent ---- hydraulic system and the electricitycontrol system, its hydraulic system by boards the hydraulic systemand alights the hydraulic system to be composed. Two between (verticalfluctuation type upper air vehicle is an exception) by the centerswivel joint connection, boards the hydraulic system by the amplitudesystem, the expansion and contraction system and the rotary systemthree basic systems is composed. In the entire hydraulic systemdesign, used the brake control to overcome in the oil motor existenceto release but the by-pass valve not to be able to lock in stops inthe airborne heavy item, caused the heavy item reliably to stop inairborne. The brake uses outside the constant pressure to control, mayfurther reduce the by-pass valve to open the pressure, enhances thereturn route efficiency.
From the security, the reliable angle looked that, the upper airvehicle is different with the general project machinery, it scharacte ristic is the work frequency is not high, load smaller, butthe request security, the reliability is higher. Therefore, the upperair vehicle should have the urgent stop device. The upper air vehiclesupposes the spacing installment in each implementing agency movementend position, regarding folds the arm type and the mix arm -like upperair vehicle in particular should suppose the arm spacing installment,guarantees the entire vehicle the stability. The upper air vehicleamplitude system and the expansion and contraction system speed mustperform to control, prevents the production "overspeed" thephenomenon.
Therefore, for guaranteed work high above the ground vehicle workstable, reliable, safe, work nimble, the efficiency is high, designs the fine hydraulic system and the electricity control system appears especially importantly.
Keywords: The high-altitude working machine; braker, iternal leakage;external control with constant voltage;The installment limits the position.