喜歡這套資料就充值下載吧。。。資源目錄里展示的都可在線預覽哦。。。下載后都有，，請放心下載，，文件全都包含在內，，【有疑問咨詢QQ:414951605 或 1304139763】
膜片夾片注塑成型工藝及模具設計
摘 要
該設計題目為罩注塑模設計，通過對該塑件模具的設計，進一步加強了設計者注塑模設計的基礎知識，為設計更復雜的注塑模具做好了鋪墊和吸取了更深刻的經驗。
本設計運用塑料成型工藝及模具設計的基礎知識，首先分析了塑件的材料及性能要求，為選取澆口的類型做好了準備；然后估算了塑件的體積，便于選取注塑機及確定型腔數量；最后分析了塑件的特征，確定模具的設計參數、設計要點及推出裝置的選取。
本副模具的設計需要推桿頂出機構，在開模時用推桿頂出塑件，直到塑件脫出型芯。這種機構脫模可靠，設計方便且在模具中占用空間較小，非常適合在本副模具中使用。
關鍵詞：注塑模 澆口
Injection molding designing of The shell
This design topic is the shell of the Injection molding design, After the plastic part of the Injection molding designed The designer’s foundation knowledge of the injection mould design is reinforced and is able to design more complex injection mould through the design.
Through the foundation knowledge, first, I analysed the plistic material and its properties,so I made selecting the typeal of the gate for preparation,I estimated the plistic parts’ physical vlume which good for choosing the injection-molding machine and the cavity.Last Ianalysed the plistic parts’ chavalteristic,I made the parameter of design,the importance of design and ejctor.
This molde design need other side to open on the open molde. When the open molde the ejector plate ejects the plistic parts until the plistic parts ejector the core,this molde ejector is very good,because this molde use short area and design easy,we often use it.
Keywords: Injection molding , Gate