SQ6.3噸隨車起重機設計,SQ6.3噸隨車起重機設計,sq6,噸隨車,起重機,設計 中國礦業大學 畢業設計 課 題 名 稱 6.3噸隨車起重機 學 生 姓 名 陳 娟 學 號 160110560 院(系)、專業 機械電子工程11級 指 導 教 師 韓振鐸 2013年 3月23日 摘 要 隨車起重機屬于臂架型起重裝置，集起重和運輸于一體，結構緊湊、易于操作，不僅節省勞動力，而且極大的降低了工作強度、提高了工作效率。廣泛應用于交通運輸、港口和倉庫中。 此次畢業設計在對隨車起重機進行調研和可行性分析的基礎上，從力學角度，對6.3噸隨車起重裝置的起升機構變幅機構和回轉機構進行了具體設計。 所設計的起升機構包括液壓馬達、減速機、棘輪停止器和卷筒幾部分。減速機用來降低液壓馬達驅動速度，根據變速比，確定了其具體型號。卷筒用于繞進或放出鋼絲繩，根據工作條件和起重量，對卷筒和鋼絲繩的具體規格進行了設計。棘輪停止器用來防止逆轉，根據所受的彎矩和壓力，對其進行了設計。 變幅機構用來改變起重機幅度，包括臂架系統和變幅傳動系統。本文中，采用了伸縮式、箱形結構。箱形結構內裝有伸縮油缸，起重裝置的變幅可通過液壓缸實現。 回轉機構包括回轉支承裝置和回轉驅動裝置，并采用渦輪旋桿減速機和液壓馬達。這種結構自重輕，受力合理，運行平穩。 關鍵詞：隨車起重機；起升機構；變幅機構；回轉機構；吊臂 ABSTRACT Truck Mounted Crane (TMC) belongs to boom-crane. Combining the advantages of booming and transporting together, it has the features of compact structure and easy operation，not only saves the labor force, but also decreases the labor intensity and increases the efficiency of working. It is widely used in traffic transportation, docks and warehouses. In this paper, based on the investigation and feasibility analysis of TMC, the winch mechanism, the arm-changing mechanism and the swing mechanism of the TMC 6.3T were designed from the mechanics angle. The winch mechanism consists of hydraulic motor, decelerating machine, ratchet wheel stopping machine and reel. Decelerating machine lowers the speed of the hydraulic motor for driving, and its size was defined according to the ratio of the speed variety. The reel is to wind or unwind the load hoisting wire rope. The sizes of the reel and the wire rope were designed according to the work condition and the rise weight. Ratchet wheel stop is used to stop the converse motion, and it was decided by the pressure the gear bears. The arm-changing mechanism is the system that changes the arm range of the boom-crane. It includes the arm system and the arm-changing moving system. In this paper, flexible arm type and box form structure were used. Cylinder bodies are fitted on the boom. The working range of TMC can be realized by the extension or retraction of the cylinder body. The swing mechanism contains swing bearing and swing driver. Bearings, worm-and-wheel steering gear and hydraulic motor were adopted. This structure has the advantages of light weight, reliable force and smooth action. Key words: Truck Mounted Crane; Winch mechanism; Arm-changing mechanism; Swing mechanism; Boom