前端蓋沖壓成形工藝與模具設計【張力盤】【落料拉深復合?！?/h1>
前端蓋沖壓成形工藝與模具設計【張力盤】【落料拉深復合?！?張力盤,落料拉深復合模,前端蓋沖壓成形工藝與模具設計【張力盤】【落料拉深復合?！?前端,沖壓,成形,工藝,模具設計,張力,落料拉深,復合
前端蓋沖壓成形工藝及模具設計
摘要：本設計的題目為前端蓋沖壓成形工藝及模具設計的設計,體現了薄板類沖裁零件的要求、內容及方向，有一定的設計意義。通過對該零件模具的設計，進一步加強了本人沖壓模設計的基礎知識，為設計更復雜的沖壓模具做好了鋪墊和吸取更深刻的經驗。
本設計運用沖壓成形工藝及模具設計的基礎知識，首先分析了沖裁件的沖壓工藝性，為確定沖裁工藝方案做好了準備；然后計算沖裁力和模具刃口尺寸，便于選取壓力機及確定工作零件的尺寸和結構；最后分析了制件的特征，確定模具的設計參數、設計要點及推件裝置的選取。
本沖裁件規則形狀的圓,為了便于落料凸模的加工，所以在設計時把落料凸模設計成直通式。此外,該制件的尺寸較大,本副模具采用倒裝結構形式,同時,為了簡化模具結構采用彈性推件裝置。
關鍵詞： 沖壓模 倒裝復合 凹模 彈性推件
The front cover stamping process and die design
Abstract: This design topic for the front cover design process and die design ofstamping forming, content and direction of the sheet metal blanking parts requirements, the design of a certain significance. Through the design of the die parts, further strengthen the stamping die design of the basic knowledge, which paves the way for more profound experience and lessons for the design of more complex stamping die.
The design of the stamping process and die design of the basic knowledge, the first analysis of the stamping process of blanking, punching process scheme for determining ready; then the calculation of blanking force and die cutting edge size, easy to select the press and determine the size and structure of working parts; finally analyses the product characteristics, determination of designparameters, die design and the pushing device selection.
The blanking piece shape circle, in order to facilitate the processing of blanking punch, so in the design of the blanking punch is designed through type. In addition, the size of the workpiece is larger, the mold using flip chip structure, at the same time, in order to simplify the mould structure with elastic pushing device.
Keywords: push the stamping die compound die elastic