喜歡這套資料就充值下載吧。。。資源目錄里展示的都可在線預覽哦。。。下載后都有，，請放心下載，，文件全都包含在內，圖紙為CAD格式可編輯，【有疑問咨詢QQ:414951605 或 1304139763】 大 學 本科生畢業設計 姓 名： 耿 娜 學 號： 21040259 學 院： 應用技術學院 專 業： 機械工程自動化 設計題目： 叉車設計 專 題： 指導教師： 韓振鐸 職 稱： 副教授 2008 年 6 月 徐州 中國礦業大學畢業設計任務書 院（系）應用技術學院專業年級機自04-2班學生姓名耿娜 任務下達日期： 2008 年 3 月 15 日 設計（論文）日期：2008 年 3 月 15 日至2008 年 6 月 15 日 設計（論文）題目：叉車設計 設計（論文）專題題目： 設計（論文）主要內容和要求： 設計要求：叉車載重量為10噸,發動機功率112kw, 最高車速為20km/h,最大爬坡角25°。 設計主要內容：叉車總圖A0 變速箱設計A0 差速器設計A0 舉升液壓缸設計A2 圓柱齒輪A2 齒輪軸A2 設計論文121頁 院長簽字： 指導教師簽字：  摘 要 叉車具有裝卸和搬運功能，機動靈活，能適應多變的裝卸搬運要求，普遍適用于港口、車站、貨場、車間、倉庫、油田及機場等處，還可以進入船艙和集裝箱內進行裝卸作業，除此之外，還廣泛應用于軍事部門和特殊防爆部門，有的車輛可無人駕駛，到人員不斷接近的地方工作適用于柔性加工系統，總之，隨著物流技術的不斷發展和工業化水平的提高，叉車使用范圍將日益擴大，成為一種產量與品種很多的裝卸搬運機械。 本叉車是參照市場上已有產品大連6113BG型10噸叉車設計，基本參數與相近，最大載重量也為10噸，本設計主要設計了變速箱、起降油缸、差速器、貨叉前端，其中貨叉前端檔塊為創新點。 現代叉車技術發展的主要趨勢是充分考慮舒適性、安全可靠性和可維護性 ,產品專業化、系列多樣化,大量應用新技術,完善操控系統,重視節能和環保 ,全面提升產品的性能和品質。 通過對國際國內叉車造型設計的現狀分析，運用工業設計的理論和方法，研究了叉車造型設計的要素及設計原則：造型要求簡潔明快、線條流暢，以體現車身的力度感與堅實穩重的感；色彩．力求單純，給人以輕松、愉悅的感覺，主色調以明度較高的黃 色、橙色為宜；車身前后左右要求有寬大的玻璃，儀表具有良好的可讀性。研究結果對叉車設計具有重要的實際指導意義。 關鍵詞：叉車； 三軸式； 滑移直齒輪變速； 緊湊 ABSTRACT Forklifts can do handing works,and can flexibility to adapt to changing of handing requirements,and generally applicable to ports,railway stations,freight yard,workshops,warehouses,oil fields and the airport and places,and forklifts could still enter the cabin and container handing operations within.In addition,forklifts are alseo widely used in military and special explosion—proof sector,some vehicles will be unmanned,that officers should hot work in places close to or for Flexible Manufacturing Systerm.In short, as the logistics and technological development and the enhancement of the level of industrialization,the use of fork lifts will be expanding ,and it will become a yield varieties with a lot of material handing machinery. The forklift is based produces already on the market in Dalian 6113 BG-10-ton forklift design,the basit parameters was similar,for the largest load of 10 tons.The main degin of the design is the transmission, Other parts only briefly describes or do not given the design.Within this total,the transmission of three-axis,gearbex,sliding gear transmission,simple and compact structure,by the same agencies to achieve a variable speed transmission and reverse operation.. The major trend ofmodern technology developmentof the fork truck is to be fully in consideration of the friendly operation, the reliability, the safety, the goodmaintenance, the specialization, the series, and the diversificat, and to adopt new technology, to improve steering system, and to focuson energy saving and environmentprotection in order to promote the truck’s capacity and quality. Based on the analysis of current status of international and domestic forklift truck form design， the key elements and design principles in forklift truck form design was researched using industriM design theory and methodology：It Was put forward that the form offorklift truck should be simple and lively tll smooth lines in order to convey the sense of strength and steadiness；the color strives simplicity to make people feel pleasant and light — mainly usingtones ofyeHow and orange；there shouldbe big ass atthefrontand back oftrucks；thein— struments should be easy to read．The research results provided practical reference for forklift truck design． Keywords： fork truck; 3-axis; sliding gear transmission; compact 目 錄 1 緒論 1.1 國內叉車外觀造型設計的現狀……………………………………1 1.2 國際叉車外觀造型設計的現狀……………………………………2 1.3 叉車造型設計幾個方面……………………………………………2 1.4 叉車技術的發展趨勢………………………………………………4 1.5 叉車在特殊條件下的應用……………………………………… 11 2　叉車設計總體方案 2.1 設計總體方案確定………………………………………………15 2.1.1 方案的制定原則……………………………………………15 2.1.2 設計方案的規劃 …………………………………………………15 2.1.3 方案設計內容總結 ………………………………………………17 2.2　 叉車發動機的選擇………………………………………………17 2.2.1 發動機基本型式的選擇…………………………………………17 2.2.2 發動機主要性能指標的選擇……………………………………19 3 變速箱設計 3.1 變速箱的構造和原理……………………………………………23 3.2 變速箱的結構方案圖……………………………………………26 3.3 變速箱主要參數的選擇…………………………………………27 3.3.1 變速箱掛慢速檔時參數選擇……………………………………27 3.3.2 變速箱掛快速檔時參數選擇……………………………………30 3.3.3 變速箱掛倒檔時參數選擇……………………………………32 3.3.4 中心距確定………………………………………………………34 3.3.5 齒輪模數確定……………………………………………………34 3.3.6 齒數分配…………………………………………………………35 3.3.7 齒輪其他基本幾何參數與結構圖………………………………38 3.3.8 主要零件的計算…………………………………………………44 3.4 齒輪公差組的確定………………………………………………49 3.5 軸的結夠設計及強度計算………………………………………50 3.5.1 第一軸的結夠設計及強度計算…………………………………50 3.5.2 中間軸的結夠設計及強度計算…………………………………63 3.6 軸承的選擇與校核………………………………………………73 3.7 鍵的選擇與校核…………………………………………………76 3.8 確定箱體的基本參數 ……………………………………………80 4 差速器設計 4.1　 差速器的類型及選擇 ………………………………………81 4.2 差速器齒輪設計…………………………………………………81 4.2.1 齒輪主要參數選擇 ……………………………………………81 4.2.2 幾何參數的計算……………………………………………………82 4.2.3 行星齒輪軸直徑及支撐長度確定…………………………………84 4.3 齒輪強度計算 ……………………………………………84 4.4 主減速器齒輪幾何尺寸計算……………………………………85 5 液壓驅動與控制系統的設計 5.1 驅動馬達的選擇…………………………………………………86 5.2 舉升液壓缸的計算 ………………………………………………87 5.2.1 液壓缸主要尺寸的確定 ………………………………………87 5.2.2 液壓缸的結構設計 ……………………………………………90 5.3 貨叉前端液壓缸設計……………………………………………95 5.4 驅動方案的選擇 …………………………………………………98 5.5 驅動方案的確定…………………………………………………100 6 液壓系統的常見問題及解決措施 ……………………………………101 結論 ………………………………………………………………………107 參考文獻 …………………………………………………………………108 附錄1 叉車總圖 ……………………………………………………110 翻譯部分 英文原文 ……………………………………………………………111 中文譯文 ……………………………………………………………117 致謝 …………………………………………………………………………121 編號：（ ）字 號 本科生畢業設計 叉車設計 耿 娜 21040259 機械工程及自動化04-2班 題目： 姓名： 學號： 班級： 二〇〇八年六月 中國礦業大學2008屆本科生畢業設計 第10頁 英文原文 Boom time Ahealthy market means that underground truck and LHD markers are enjoying high order levels, with new models and technology also coming .in the LHD sector, several new models are already on the market from firms including EJC, Fermel, Rham Equipment and Schopf (WME Oct & Nov 2004), while Atlas Copco intends to launch at least one new design in 2005 –possibly an St14. But it is the truck sector that is the most active right now with renewed emphasis on power to weight ratios right through the payload range The latest models are taking advantage of advances in diesel technology by fitting more powerful engines and allowing better speeds on steep ramp hauls .The impact of this is significant, as higher speeds mean lower cycle times and offer major gains in productivity, even allowing reductions in fleet sizes. At the top of the payload scale competition is now particularly fierce. Sandvik Tamrock is certainly pushing the boundaries with its Toro 60, a three axle truck with a rigid chassis and a 60 tonne capacity. This Cummins-powered truck offers a good power to weight ratio and a payload advantage over Caterpillar’s AD55 and atlas Copo’s MT5010 that Sandvik Tamrock says should allow mines to trim fleet size, especially over longer ramp hauls. sandvik Tamrock expects the Toro 60 to take back some of the market claimed by Cat’s successful AD55,with its 55 tonne payload. However Atlas Copco is fighting back against both Caterpillar and Sandvik tamrock with yet another upgrade to its MT5010 truck, providing a power increase from 488-597kw/650-800hp. The new Cummins Qsk19 diesel boosts the MT5010’s power to weight ratio from 5.27-6.5kw/tonne, allowing it to reclaim ground over the AD55 and Toro60, despite their larger payload. Atlse Copco also says that driveline problems which afflicted earlier truck designs have long since been eliminated. The company points out that MT5010 is a successful design with units operating I Australia recording speeds of 14kph on 1:10 ramps, despite having 23,000 hours on the clock. Evaluating which of these three trucks offers the highest productivity could only be achieved by detailed study(and perhaps require testing), possibly with a different result depending on the nature of the specific mining application. The revised MT5010 has a higher power to weight ratio than either the AD55 or the Toro 60 but these trucks have bigger payloads of 55 and 60 tonnes respectively. The machine that best suits a given mining operation may be due to a number of basic factors such as haul distance and ramp gradient as well as ventilation infrastructure, ambient temperature and even material type. Overall though the customer will be the winner, with the latest large Atlas Copco, Caterpillar and Sandvik Tamrock trucks all offering much better productivity and reliability than was ever available to the 50+tonne class before. The same dort of power to weight ratio gains can be seen further down the truck payload range. Atlas Copco, Caterpillar, Dux, EJC, MTI and Zanam legmet have all fitted more powerful diesels to trucks with payloads in the 12-30tonne range,with similar benefits to those seen at the top of the capacity scale. For example, one Canadian mine replaced its earlier generation 16 and 17 tonners with newer 20 tonners,which offer short travel times on ramp, despite their increased payload and this has resulted in a substantial productivity gain overall. That the new generation of engines produce more power from similar outer dimensions is important, as they give a better payload/litre of fuel burned. However the cleaner emissions have added benefits, with cost advantages to mine ventilation requirements. In general, the new small-mid sized trucks themselves are externally similar to previous models, but are fitted with stronger drivetrains and axles to cope with the additional power (WME Oct2004&WME Nov 2004). Small detail changes like extended oil life or filters with replaceable elements make identifiable benefits to service costs. While the basic designs of these updated trucks remains similar, the better drivelines and new generation diesels mean that the machines require less maintenance are more reliable and are considerably cheaper to run. Self-drive Automation is still on the agenda with regard to LHDs and trucks, with the many benefits being shown at those mines that have taken the plunge and opted for this technology. These is still progress to be made with regard to orders but Caterpillar and Sandvilk Tamrock are both pushing hard to sign up customers for their LHD(and truck)automation systems, MINEGEM and Automine respectively. At the moment only Codelco is using the full Automine automation system at the Pipa Norte and Diablo Regimiento zones of its EITeniente copper mine in Chile. But DeBeers and Sandvik TAmrock are developing a system for the Finsch mine in South Africa. And while Caterpillar has yet to notch up a commercial sale for MINEGEM, the technology is being used for production at the northparkes and Olympic Dam mines in Australia. There are a lot of similarities in the way MINEGEM and Automine work, with laser equipment mounted onboard the LHDs. These scan the tunnels ahead of the machines as they tram, picking up changes in the tunnel profile and allowing the machine to recognize its position in milliseconds. The lasers update tunnel maps continuously to, resulting in large volumes of date shuttling back and forth constantly. Cat’s MINEGEM system operates on a wireless LAN infrastructure with an 11 Mbps capacity. Sandvik TAmrock’s Automine system requires similar broadband communicational capabilities. Both MINEGEM and Automine are controlled by conventional and readily available computing hardware, while a good deal of the components is standard off-the-shelf items selected for their ability to cope with the tough mining cycle. With these technologies, one operator can supervise the running of up to three LHDs that run more or less autonomously, with the only manual input being for the bucket loading part of their operating cycle. Caterpilliar’s MINEGEM is a package built up of several layers and this allows customers to select the separate components they require. The tactical layer of MINEGEM provides automatic steering for an LHD and prevents it from colliding with the walls of the tunnel or against other vehicles. The operator fills the bucket and selects forward or reverse, with the system providing automated tramming and bucket dumping. The strategic layer is more complex as this integrates the operation of up to three LHDs, oversees their operation and has higher level planning capabilities. It is the strategic layer that is in chare of traffic control functions, so that multiple cycles can be ‘scripted’for blending ores from different drawpoints for instance, with the overall benefit of increasing production efficiency. Safety is improved as the operators can be situated away from where the machines are running (they don’t even have to be in the mine at all and in theory, could be sitting in an office on the other side of the world). Moreover, the machines require less maintenance and have lower running costs as gearchanges are made at optimum times, engines are not over-revved, there is less wheel-spin and the risk from collisions with tunnel walls of other machines is all but eliminated. However, the complete Automine and MINEGEM technologies are not inexpensive and suit applications in purpose-built mine areas (or even mines).The automated equipment runs in parts of the mine that are separated from other operations and with personnel access carefully controlled. There are however comparatively few large(and/or new)mines with the sort of block caving or sublevel caving applications that best suit this sophisticated full automation technology and can justify the investment. As a result, Caterpilliar and Sandvik Tamrock (separately) identified a need for less sophisticated systems that offer many of the same operating benefits, while being substantially less costly. By opting for just the tactical layer of MINEGEM (called Co-Pilot), a mining firm can introduce an effective and comparatively low-cost technology for single LHD automation. And CO-Pilot comes with a manual over-ride, allowing it to be used as a conventional remote control if/when required. In this respect, Sandvik Tamrock has a broadly similar product in the shape of its Automate system, which is also designed for single LHD automate and has equivalent control specifications. With Automation or Co-Pilot, mines can introduce single LHD automation into applications where conventional remote control systems are used at present. The advantage of this is that single machines can benefit from the automated tramming, without the expense of the complete machine automation package(or the inherent changes to infrastructure and mine layout). Both Caterpilliar and Sandvik Tamrock point out that this technology has huge potential with firms using conventional remote control and will be of particular benefit at mines with high incidences LHD collision damage. And, as anyone who has ever operated a radio-controlled car can attest, it can be difficult to judge distances between a moving machine and its surroundings from a distance. The single automation equipment will take away this risk of collisions and make substantial reductions in machine downtime and repairs, as well as boosting productivity. A study commissioned by Caterpillar from Australian body STEM shows that replacing conventional remote controls with simpler single LHD systems would provide payback times of three years(and even less in some instances), while providing productivity gains of up to 37%. For the moment, mining firms seem reluctant to invest in full LHD automation due to the expense and complexity of the technology. But with the production and cost benefits offered by Cat’s MINEGEM Co-Pilot and Sandvik Tamrock’s Automate system for single LHD automation in existing mines, that situation could well change soon. Russian firm MOaZ builds two underground trucks, the 7405-9586 for narrow operating conditions and the more conventional 7529, both of which have 22 tonne payloads. The 7405-9586 weighs 19.5 tonnes unladen, has a canopy as standard, is powered by a JMZ-238KM2 diesel rated at 140kw and measures 2.9m wide for use in narrow access areas. As this model has 2WD it can cope with 9°maximum slopes and best suits flat hauls or tunneling applications, offering a maximum speed of 40 kph. The 7529, weighs 24 tonnes unladen, features 4WD and has a more powerful JMZ-238BN2 engine delivering 190 kw, allowing use on steeper ramps. This machine also has a top speed of 40 kph and is equipped with an enclosed cab as standard. Both the 7405-9586 and 7529 trucks can be fitted with Deutz engines if required. German firm Paus built two tractors for Kali & Salz that tow pallets on trailers using a gooseneck connection. The vehicles are powered by 176 kw Deutz BF6M1013 engines. These offer payloads of up to 30 tonnes and are used to carry equipment, spare parts and materials underground, though product haulage is still by truck. Paus also has a number of loaders now operating at mines in Russia, with a number of engineering coming in a well from Australia. These are from engineering firms carrying out feasibility studies and are not expected become equipment orders immediately, but the firm is confident that these will translate into actual deals. The company adds that it is now receiving interest in the novel undercutting type machines, of which it built 15 units for operations in Belarus. In addition, Paus is building a number of ditch cleaning machines for Norilsk Nickel in Russia. These are based around a small mine locomotive, with an excavator boom that allows the machine t clear the dewatering ditches running alongside the tracks. 中文譯文 風靡時期 良好的市場意味著地下卡車和LHD制造者正在享有一流的水平，同時新模式和技術不斷涌向市場。在LHD行業，來自EJC，F(xiàn)ERMEL，RHAM EQUIPMENT和SCHOPF公司的新模式已出現在市場上，與此同時，ATLAS COPCO公司預計最遲在2005年開始從事一種新型設計-ST14。 但是，在卡車行業，現在最活躍的事情是重新重視功重比和有效載荷的變化。最新模式通過安裝更大功率的發動機和允許在陡的斜坡行程中有較好的運行速度，充分利用了柴油機在技術上的發展。這種作用是顯著的，速度愈高意味著循環周期愈短，獲得的生產效率愈高，甚至允許減小規模。 在有效載荷極限方面的競爭，現在是特別的激烈。SANDVIK TAMROCK正推出TORO60、三軸帶有固定底座和容量60T的卡車，這種功率的卡車，可以提供比CATERPILLAR公司AD55和ATLAS公司的MT5010更好的功重比，以至于SANDVIL TAMROCK公司說這種設備允許礦井改變它的規模，特別是長的斜坡行程的地方。SANDVIK TAMROCK 期望TORO60可以奪回由有效載荷是55T的CAT公司的有成效的AD55占領的市場，然而，ATLAS COPCO公司用另一種改進型的可提供功率488-597KW/650-800HP變化范圍的MT5010卡車同CATERPILLAR 和SANDVIK TAMROCK兩家公司作斗爭。新型QSK19柴油機使MT5010的功重比從5.27KW/T增加到6.5KW/T，這使它重新獲得由AD55和TORO60占領的市場，ATLAS COPCO公司說盡管AD55和TORO60有很大的有效載荷，但困擾卡車設計者的路線問題，很長時間才被消除。根據在澳大利亞的 速度14KPH 1：10斜坡上的單元操作，公司指出，MT5010是一項非常成功的設計，盡管耗時23000H。 對這三種卡車，哪種能提供更高的生產率的評估，只有通過細節的研究才能實現，不同的結果依賴于特定礦井應用的性質。雖然AD55有55T的有效載荷和TORO60有60T的有效載荷，但與AD55和TORO60相比，改進型MT5010有更高的功重比。某種機器最適用于某種給定的礦井操作可能是因?yàn)橐恍┗疽蛩?，比如：行程距離、坡度、通風設施、周圍環境的溫度，甚至材料類型。不過總體上說，顧客是贏家，與以前的50T級可獲得的生產率和可靠度相比，最新大型的ATLAS 、COPCO CATERPILLAR 和 SANDVIK TAMROCK公司生產的卡車全都可以提供更好的生產率和可靠度。 卡車有效載荷變化不久，同種功重比的獲得即可看到。ATLAS COPCOC、ATERPILLAR、 DUX、EJC、MTI和ZANAM LEGMET 公司安裝更大功率的柴油機在卡車上，這允許有效載荷在12-30T范圍內變化，類似成效在容量范圍上也能看到。例如，一加拿大礦井，用新型20T取代了它早期的16T-17T，它在斜坡上費時較短，盡管只增加了有效載荷，但大體上仍提高了生產率。與同表面尺寸的發電機相比，新一代發電機提供更大的功率是重要的，因?yàn)槿剂先紵龝r(shí)，它們能給更多的能量。不管怎樣，排放物愈清潔，利潤愈高，通風設施成本愈低。 一般來說，新中小型卡車表面上類似于以往的模式，只是安裝了更堅固的駕駛裝置和便于應付額外功率的軸。一些小細節的改變，如增加汽油的壽命或取代過濾器，可以識別對服務成本的優勢。這些更新過的卡車的基本設計仍保持類似性，好的路線和新一代柴油機意味著機器需要較少的維修，擁有更高的可信賴度和相當?shù)偷倪\(yùn)行成本。 自動駕駛 對于LHD和卡車來說，自動化一直是重要事情，對于這項技術已有許多優勢呈現在那些礦業面前等待他們做出決定和選擇。定單一直在增加，盡管如此，CATERPILLAR和SANDVIK TAMROCK兩家公司一直對為了他們各自的自動化系統、MINEGEM和自動采礦的簽約顧客施壓。此時此刻，僅CODELCO公司正在應用全自動系統，在CHILE的EITENIENTE礦的PIPA NORTE 和DIABLE REGIMENTO區域。但是DEBEERS 和SANDVIK TAMROCK 公司正在為了在南非的FINSCH礦井應用而研發一種新的系統。此時，CATERPILLAR公司已獲得MINEGEM的商業化買賣權，此技術正在應用于澳大利亞的NORTHPARKES和OLYMPIC DAM礦井中。 MINEGEM和AUTOMATE之間有許多類似的地方，在LHD上都安裝有激光裝置。當卡車運行時，這些激光裝置可以掃描機器前面的隧道，接收隧道側面輪廓的變化，然后允許在幾秒內對它的位置做出辨別。激光裝置根據連續前進后退所得大量的數據更新隧道地圖。CATERPILLAR公司的MINEGEM系統運行于容量是11MPS的無線LAN基本設施上。SANDVIK TAMROCK公司的自動采礦系統需要廣泛的溝通能力。MINEGEM和自動采礦由系統和可快速獲得的計算機硬件控制，同時有許多組成部分是普通的已有的項目，這些項目選擇它們應付棘手循環問題的能力。 在這些技術支持下，一位操作者可以管理三臺正在運行的LHD，這些LHD或多或少的自主地運行，因?yàn)樗鼈冞\(yùn)行周期中裝載是手動的，CATERPILLAR公司的MINEGEM是一個有幾層的軟件包，這允許顧客選擇他們的需要部件。戰術層為LHD提供自動駕駛，防止它與隧道墻壁碰撞或車輛相碰。操作者裝載，然后選擇前進或后退，系統自動形式和卸載。戰略層比較復雜，因?yàn)榧偃缌瞬僮餮b置，縱觀全過程，有較高水平的計劃能力。戰略層掌握交通控制函數，因此復雜的循環也能一清二楚。例如，從不同的選擇點摻和礦砂，大體上有效的增加生產率。 操作者離開機器運行的地方時，安全性提高了，他們不必一直待在礦里面，理論上他們可以坐在地球的另一側的辦公室里。更甚者，當傳動裝置運行在最佳時期時，機器僅需很少的維護和較低的運行成本，發電機不必快速運轉，傳動輪也比較少，與隧道墻壁或其他的機器相碰的風險完全被消除。 然而，完全的自動化和MINEGEM技術不是不昂貴的，它們適合應用于建有專門設施的煤礦區域或礦井中。自動設備運行在礦井中與其它操作分開的部分，職員通道被小心的控制著。盡管如此，有一些相對較大的或新的露天煤礦非常適用應用先進的全自動技術，且證明投資是正確的。結果，CATERPILLAR和 SANDVIK TAMROCK兩家公司分別認為需要少的先進的系統，這些系統可以獲得同樣的操作效益，同時花費相當?shù)偷倪\(yùn)行成本。通過合理選擇MINEGEM的戰略層，一家礦業公司可以對單個的LHD自動化引進有效益的相對低成本的技術。CO-POILT手工短程運行，這允許它，當需要的時候，作為傳統的久遠的控制被應用。就這個而言，SANDVIK TAMROCK公司有一個在自動化系統形狀方面非常類似的產品，它也是為單個的LHD自動系統設計的，且有相同的控制規范。 擁有了自動化或戰略層，礦井可以引進單個的LHD自動化加以應用，在那兒傳統的久遠的控制系統被應用。這樣的優勢是單個的機器可以從自動軌道上取得利益，而不必花費完全姿態的費用或基本設施和礦井布局的固有成本。CATERPILLAR 和SANDVIK TAMROCK公司指出，此項技術對于應用傳統控制的公司來說具有巨大的潛力，對于高發生LHD碰撞損壞的礦井來說有特別的效果。曾經操縱過無線電控制的汽車的任何一個人都能證明，判斷一個動的機器和它一定距離的環境的距離是困難的。單個的自動控制設備能避免這種相碰危險，并且大大縮短機器停車時間和維護，因此提高生產率。委托于CATERPILLAR公司的來源于澳大利亞的STEM研究顯示，用簡單的LHD系統取代傳統的控制的回收期為三年，在一定的情況下甚至?xí)蹋瑫r(shí)是生產率增加到37%。 目前，礦業公司看起來不情愿投資全LHD自動化，由于此技術的費用高和復雜性。在礦中，為單個LHD自動化的CATERPILLAR公司的MINEGEM CO-POLIT和SANDVIK TAMROCK公司的自動化系統所提供的產品和價格效果的情勢不久將會變好。 俄羅斯公司MOAZ建立了兩個地下卡車站，適用于窄操作環境的7405-9586和更常規的7529，它們的有效載荷均為22t?？蛰d重量19.5t，有一個罩蓬作為平衡裝置的7405-9586，由比率是140kw的JMZ-238KM2發電機提供動力，它能測量2.9m的寬度，應用于窄的交叉區域。這種類型的有兩個WD，因此它能應付最大坡度是9°的斜坡，最適應于平原或隧道環境，它的最大速度是40kph。空載重量是24t的7529，有4個WD，它由功率是190kw的JMZ-238BN2馬達提供更大的功率，允許在斜坡上運行，這種機器的最大速度是40kph，并且附上一個蓋子作為平衡裝置。如果需要，7405-9586和7529這兩種型號都由Deutz設計供應。 德國公司Paus建立兩個拖車站為Kali和Salz。那有牽引平臺作為牽引裝置，這種車輛是176kw的Deauz BF6M1013馬達提供動力，這種類型提供的有效載荷是30t。通過貨運被用來搬運設備，外加的零件和地下材料。在俄羅斯的礦井中有許多這種設備正在應用，這些設備來自澳大利亞的井中。來自于工程公司的這些正在實施特征研究，并不希望立即變成工程定單，但是公司確定：這些將變成實際應用。公司公告：他們目前正對新穎的分離式的機器感興趣，在Belarus，它建立了15個操作單元。此外，在俄羅斯，Paus為了Norilsk Nickel 設立了一系列清除機器的溝壑。這些被設在一個小型的礦井機車的四周，此種機車帶有一個挖掘機，這個挖掘機允許機器清理環繞在卡車站周圍的地下水溝。