《設備搬遷合同(DOC6頁)》由會員分享，可在線閱讀，更多相關《設備搬遷合同(DOC6頁)（6頁珍藏版）》請在裝配圖網上搜索。

1、甲方名稱： 乙方名稱： 地址： 地址： 根據《中華人民共和國合同法》的規定，合同雙方就乙方向甲方提供一次性中心機房設備搬遷服務事宜，經協商達成一致，確立本合同，以明確雙方的責任、權利及義務，確保合同雙方共同執行。 moving services agreement this moving services agreement (the "agreement") is entered into as of the日期 day of 月份, 2006, between 甲方名稱 with its principal place of business at 甲方地址 (herein

2、after referred to as the “shipper＂) and 乙方名稱 with its principal place of business at 乙方地址(hereinafter referred to as the"carrier"). recitals the shipper wishes to have its equipment in the central terminal moved from the current address to 新地址and the carrier is in the business of moving services

3、 and assures the shipper that it has the facilities, personnel, and technical expertise necessary to carry out the single full-service move. in consideration of the mutual promises, covenants, and agreements contained herein, both the parties reach the agreement as follows, subject to the contract l

4、aws of people＇s republic of china. hence, the responsibilities, rights, and obligations of each party are specified with the view to ensuring that both parties will honorably put the agreement into execution. [免責條例] （1）針對甲方需搬遷的設備，乙方只負責硬件設備搬遷不負責數據和軟件安全。 （2）對于搬遷的設備，乙方如果需對設備進行拆裝，以后因拆裝引起的保修問題由甲方負

5、責。 exemptions 1. in performing the services stipulated in the agreement, the carrier shall be responsible for moving the shipper＇s hardware only, but shall not in any way be held liable for the safety or intactness of the database and software concerned. 2. also, the carrier shall uninstall

6、and install the equipment (as defined below), but any problem arising thereof in connection with maintenace and repair of the equipment shall be handled by the shipper only. [服務費用] 臺式機 1 套 rmb50元 服務器 1 臺 rmb450元 機柜 1 臺 rmb450元 小型機 1 臺 rmb450元 磁盤陣列柜 1 臺 rmb450元 ups主機 1 臺 rmb350元 ups電池 1 塊

7、rmb30元 監控器 1 臺 rmb200元 交換機 1 臺 rmb350元 運輸車輛 1 天 rmb950元（包含司機，油費，停車費，保險） 其它設備 協商報價 service fees item quantity service fee per unit platform machine one set rmb50 server one set rmb450 cabinet one rmb450 small machine one set rmb450 disc array cabinet one rmb450 ups main frame one set

8、 rmb350 ups battery one rmb30 monitor one rmb200 switch board one set rmb350 vehicle transportation, including the driver, fuel, parking charge, and insurance rmb950 per day other equipment na to be negotiated and quoted 甲乙雙方在搬遷完三個工作日內：乙方根據《搬遷驗機單》統計此次搬遷設備所產生的費用，將《費用清單》以書面形式交付甲方，甲方核實無誤后簽字確認

9、，此《費用清單》原件甲乙雙方各持一份（《費用清單》見附件b）。 注：因本合同所產生搬遷設備數量無法在搬遷前確認及統計，所以具體費用以《費用清單》為準。 within three days after the services agreed on are completed, the carrier is to add up the total cost of the services on the basis of the delivery receipt duly signed by the shipper and then present the detailed bill in

10、writing to the shipper. after verifying the bill, the shipper shall sign on it. after that, each party shall be given one copy of the signed bill (see attachment b). note: since the workload involved with the agreement cannot be precisely estimated before the move, the actual expenses shall depend

11、on nothing other than the final detailed bill. [甲方搬遷前準備 ] 1.做好所有數據備份，確保數據安全； 2.選擇一條以上運輸線路圖 ，提前五日提供給乙方； 3.檢測新機房溫度，濕度，電源環境（注:地線必須接地）達到設備使用要求； 4.提前辦理好搬遷所需的出入門及相關手續，以便搬遷順利； 5.甲方提供一位協調人員與乙方協調人員配合工作； 6.新機房設備擺放圖，提前五天供給乙方； 7.新工作環境和現在工作環境各提供一間作為設備周轉用途的工作場地。 preparations on the part of the shipp

12、er the shipper shall make the preparations set forth below: 1. reproduce all the digital files in adequate numbers of copies to make certain that the database is in secure condition. 2. select more than one transportation route and provide it for the carrier at least five days prior to the move.

13、 3. inspect and measure the temperature, humidity, and power supply (with ground connection properly made) in the new terminal to ensure that they are up to the requirements. 4. secure all the entrance and exit permits and go through all the necessary procedures in advance to facilitate the move.

14、5. designate a coordinator to work with the counterpart appointed by the carrier. 6. provide the map and the layout of the new terminal for the carrier at least five days prior to the move. 7. allocate a temporary storage room suitable for the equipment in transit both at origin and at destination

15、. [惠普(hp) 服務器，機柜搬遷細則] 一 乙方搬遷前準備： 1.熟知甲方提供的運輸線路； 2.安排好搬遷人員分工； 3.準備所有搬遷所需工具（如：十字，一字；t8，t9， t10，t15， t20，t30， t40；搬遷標簽，紙箱，滑車，鉗子，減震材料等） ，車輛及相關資料； 4.經甲方同意提前三天到新機房熟悉甲方提供的設備擺放圖； moving instructions on hp server & cabinet (a). the carrier shall make the following preparations beforehand: 1. b

16、e fully familiar with the transportation route or routes chosen by the shipper. 2. divide the workload among its employees. 3. get ready the vehicles and relevant documents as well as all the tools needed, such as various types of screw-drivers, t8，t9， t10，t15， t20，t30， t40, color-coded labels, c

17、artons, pulleys, wrenches, and shock-absorbing materials. 4.with the shipper＇s approval, inspect the new terminal and get familiar with its layout three days prior to the move. 二 服務器 ,機柜拆卸 1.甲方與乙方同時檢測服務器狀態和服務器配置，檢測完后雙方在驗機單上簽字（《搬遷驗機表》見附件a）； 2.由甲方關閉所有搬遷設備軟件程序； 3.由乙方工作人員斷開電源 ； 4.拆卸前每位乙方工作人員佩戴防

18、靜電手環； 5.以甲方現在每個機柜為一套設備進行統一標識； 6.每臺服務器對應的聯線、硬盤、電源貼上對應標簽； 7.斷開服務器所有聯線； 8.將服務器拆離機柜，如果拆離硬盤應做好標識； 9.對服務器進行包裝，對拆離的硬盤做減震包裝； 10.搬運上車。 (b). disassembling hp server ＆ cabinet 1. both the shipper and the carrier shall inspect and test the server and its accessories simultaneously and both parties sha

19、ll sign on the inventory list (see attachment a) after the satisfactory inspection. 2. the shipper is to terminate all the software employed on the server. 3. the employee of the carrier is to turn off the power supply. 4. each employee of the carrier shall put on an antistatic bracelet before wo

20、rk. 5. the carrier shall now start to attach a color-coded label to the cabinet and its corresponding server in an organized way. 6. the cables, disks, and power supply of each server are marked with identical color-coded labels respectively. 7. the cables of the server are taken away. 8. the se

21、rver is separated from the cabinet and its disks are properly labeled if taken out. 9. the server is securely packed and its isolated disks are wrapped in shock-absorbing materials. 10. the server together with its accessories is loaded in the vehicle. [易安信（ emc） 服務器，機柜搬遷細則] 一 乙方搬遷前準備： 1.熟知甲

22、方提供的運輸線路； 2.安排好搬遷人員分工； 3.準備所有搬遷所需工具（如：十字，一字；t8，t9， t10，t15， t20，t30， t40；搬遷標簽，紙箱，滑車，鉗子，減震材料等） ，車輛及相關資料； 4.經甲方同意提前三天到新機房熟悉甲方提供的設備擺放圖。 moving instructions on emc server & cabinet (a). the carrier shall make the following preparations beforehand: 1. be fully familiar with the transportation ro

23、ute or routes chosen by the shipper. 2. divide the workload among its employees. 3. get ready the vehicles and relevant documents as well as all the tools needed, such as various types of screw-drivers, t8，t9， t10，t15， t20，t30， t40, color-coded labels, cartons, pulleys, wrenches, and shock-absorb

24、ing materials. 4. with the shipper＇s approval, inspect the new terminal and get familiar with its layout three days prior to the move. 二 服務器 ,機柜拆卸 1.甲方與乙方同時檢測服務器狀態和服務器配置，檢測完后雙方在驗機單上簽字（《搬遷驗機表》見附件a）； 2.由甲方關閉所有搬遷設備軟件程序； 3.由乙方工作人員斷開電源 ； 4.拆卸前每位乙方工作人員佩戴防靜電手環； 5.以甲方現在每個機柜為一套設備單元進行統一標識； 6.每臺服務器

25、對應的聯線、硬盤、電源貼上對應標簽； 7.斷開服務器所有聯線； 8.將服務器拆離機柜； 9.對服務器進行整體減震包裝（注：甲方咨詢過易安信客服建議硬盤不要單獨拆離服務器）； 10.搬運上車。 (b). disassembling hp server ＆ cabinet 1. both the shipper and the carrier shall inspect and test the server and its accessories simultaneously and both parties shall sign on the inventory list (

26、see attachment a) after the satisfactory inspection. 2. the shipper is to terminate all the software employed on the server. 3. the employee of the carrier is to turn off the power supply. 4. each employee of the carrier shall put on an antistatic bracelet before work. 5. the carrier shall now s

27、tart to attach a color-coded label to the cabinet and its corresponding server in an organized way. 6. the cables, disks, and power supply of each server are marked with identical color-coded labels respectively. 7. the cables of the server are taken away. 8. the server is separated from the cabi

28、net and its disks are properly labeled if taken out. 9. the server together with its hard disks is securely packed in shock-absorbing materials in accordance with the recommendation made by the emc customer service department. 10. the server together with its accessories is loaded in the vehicle.

29、 [惠普(hp) 小型機，磁盤陣列柜 搬遷細則] 一 乙方搬遷前準備 1.熟知甲方提供的運輸線路； 2.安排好搬遷人員分工； 3.準備所有搬遷所需工具，車輛及相關資料； 4.經甲方同意提前三天到新機房熟悉甲方提供的設備擺放圖； 5.與小型機工作人員配合完成拆卸前準備。 moving instructions on hp small machine & disk array cabinet (a). the carrier shall make the following preparations beforehand: 1. be fully familiar wi

30、th the transportation route or routes chosen by the shipper. 2. divide the workload among its employees. 3. get ready the vehicles, relevant documents and all the tools needed. 4. with the shipper＇s approval, inspect the new terminal and get familiar with its layout three days prior to the move.

31、 5. team up with the working staff of the shipper in charge of the said device to render it ready to be disassembled. 二 拆卸 1.甲方與乙方同時檢測設備，檢測完后雙方在驗機單上簽字（《搬遷驗機表》見附件 a）； 2.由甲方關閉搬遷設備軟件程序； 3.拆卸前每位乙方工作人員佩戴防靜電手環； 4.以甲方現在每個機柜為一套設備單元進行統一標識； 5.每臺小型機，磁盤陣列柜對應的聯線貼上對應標簽； 6.斷開所有聯線； 7.對設備進行減震包裝； 8.搬運上車。

32、 (b). disassembly 1. both the shipper and the carrier shall inspect and test the device simultaneously and both parties shall sign on the inventory list (see attachment a) after the satisfactory inspection. 2. the shipper is to terminate all the software employed on the device. 3. each employee of the carrier has to put on an antistatic bracelet before work.