資源目錄里展示的全都有，所見即所得。下載后全都有,請放心下載。原稿可自行編輯修改=【QQ：401339828 或11970985 有疑問可加】 英文原文 FUZZYDECOUPLING CONTROL OF MELT TEMPERATURE AND MELT PRESSURE FOR PLASTIC ELECTROMAGNETISM DYNAMIC EXTRUDER WEN Shengping，QU Jinping National Engineering Research Center of Novel Equipment for Polymer Processing，Dept of Industrial Equipment and Controlling , South China University of Technology，Guangzhou 510640,China Keywords: Melt temperature， melt pressure, fuzzy decoupling control, electromagnetism dynamic extruder. Abstract The plastic electromagnetism dynamic extruder has gained wide applications because of its novel structure and fine engineering performance。In the polymer processing，melt temperature and melt pressure control is crucial to the quality of the extruded product。A new fuzzy decoupling control algorithm of melt temperature and melt pressure for the novel extruder is introduced in the transfer function matrix system, which is obtained through the experimental data with system identification。The control system is implemented on programmable computer controller。Experimental results show melt temperature and melt pressure can be successful individually controlled by the heater power and the screw speed。The good system performance verifies the control strategy’s validity。 1 Introduction Polymer extrusion is a complex nonlinear multivariable coupling process。There are many factors affecting the stability of extrusion process and the quality of extruded products。The equipment is the crucial factor。There are already many kinds of extruder。Unlike the traditional extruder。a new kind of electromagnetism dynamic extruder was invented by professor Qu Jinping[5].He introduced the vibration force field into the whole process of polymer extrusion。The vibration force field brings new changes to the energy balance，quality balance and momentum balance of the whole extrusion process。Control of vibration frequency and vibration magnitude can effectively control the dynamic extrusion process。The electromagnetism dynamic extruder is shown in Fig.l，Researches on the dynamic extruder show the good performance of the machine。Besides the extruder，melt pressure and melt temperature are key variables to the extrusion process。Melt pressure directly influences the output of the product。While melt temperature's fluctuation can change melt viscosity and consequently influences melt pressure and flow rate. Therefore，the dominant variables are melt temperature and melt pressure in the dynamic extrusion process. Fig.l: the structure of electromagnetism dynamic Plasticating extruder. 1 screw,2 barrel,3 rotor,4 stator,5 support base,6 hopper In order to get high product quality，control of melt pressure and melt temperature for the traditional extruder has been done with different control method。In 1970s，Dormeier，S.[4] firstly introduced the digital PID control to melt Temperature cascade control。The diameter of the screw is 45mm.Because of the limit of hardware development，the sample period is 15s.The cascade PID control is shown in Fig.2. Fig.2: melt temperature cascade PID control. ntroduced into the barrel-wall temperature control。Richey Dubay，Adam C.Bell and Yash P.Gupta used model prediction method to establish the multiple-input multiple-output model for the temperature control of the different sections of the barrel[6].Ching-Chih Tsai and Chi-Huang Lu investigated the multivariable temperature control of the barrel based on the generalized predictive algorithm[2].The mathematic model of the heating process shown in Fig.3 was built according to the energy balance。Chi-Huang Lu also adopted the self-adaptive prediction control to the barrel temperature control[3]。Achievements gained were mainly about the traditional extruder。Melt temperature and melt pressure control of the electromagnetism dynamic extruder has seldom reported by now。Melt temperature and melt pressure control based on a new fuzzy control algorithm for the electromagnetism dynamic extruder is investigated in this paper. Fig.3: physical model of the extruder barrel Achievements gained were mainly about the traditional extruder。Melt temperature and melt pressure control of the electromagnetism dynamic extruder has seldom reported by now。Melt temperature and melt pressure control based on a new fuzzy control algorithm for the electromagnetism dynamic extruder is investigated in this paper. 2 Modelling of the system The electromagnetism dynamic extruder has five heating zones。Temperatures of the first four heaters are set by manual。The temperature of the heater on the die is to be controlled by the new control strategy。There are five thermocouples positioned in the barrel-wall to measure the barrel wall temperature。One infrared temperature transducer is positioned nearest the exit of the melt to measure melt temperature。Melt pressure is measured by a strain-gauge-type pressure transducer positioned in the die-wall。Melt pressure is controlled by screw speed。Step response of melt pressure and melt temperature to heater power on the die and screw speed were acquired through experiments.Fig.4 and Fig.5 are experimental step responses of melt temperature. Fig.4: step response of melt temperature to Heater 5 temperature Fig.5: step response of melt pressure to Heater 5 temperature Response of melt pressure and melt temperature to the heater power and screw speed is a self-balanced system。The response is over damping。So the system is considered as a second order system and system parameters can be identified from experimental data [8].The transfer function of the second order self-balance system with a pure delay is expressed as following. Where K is system gain is delay time，T is time constant, is damping ratio. Then we get the transfer function identified from experimental data. Where Tm，Pm are melt temperature and melt pressure W is the heater5 power，and n is the screw speed. 3 Fuzzy decoupling control algorithm。 According to the coupling relationship of melt temperature and melt pressure，we bring about a fuzzy decoupling controller for melt temperature and melt pressure control shown in Fig.6[1,7]. Fig.6: system structure of the fuzzy decoupling control Where Tm and Pm are actual outputs of melt temperature and melt pressure。Tm set and Pm set are set points of melt temperature and melt pressure。The whole system consists of fuzzy controller，decoupling compensator unit and fuzzy adjusting components unit。Decoupling coefficients d21 and dl2 vary according to the fuzzy adjusting components，so that the coupling of the two loops can be eliminated. 3.1 Decoupling coefficients under steady state Under steady state，according to the Equ.2,The steady state gain matrix is given by Decoupling coefficients [8] defined by the principle of decoupling compensator are given by From(3)and(4),we get the decoupling coefficients under steady state. 3.2 Adjusting of decoupling coefficients under dynamic process Decoupling coefficients mentioned above are derived from the steady state。It can entirely eliminate the coupling of melt temperature and melt pressure under steady state。In order to reduce the coupling under dynamic process，decoupling coefficients should be regulated。The modification unit is shown in Fig.7. Fig.7 Diagram of multivariable fuzzy control with modifying Compensator The system output response can be written as below: Here，ui(i=1,2)is the output of the fuzzy controller,△Yi (i=1,2)is the increment of the system output，and aij (i=1,2;j=1,2)is modifying coefficient. According to equ.7, output increment L\YI at time step n-1 and n can be expressed as: After eliminating all from equ.8,a12 can be written as: In the same way, a21 can be written as: In order to eliminate the coupling between loops under dynamic process，it must let aij=O(i=1,2;j=1,2;i:I;j).If aij≠O (i=1,2;j=1,2;i*-j),it means that decoupleing coefficients is unreasonable。Decoupling coefficients are adjusted according to modifying coefficient by fuzzy logic. Fuzzy sets of decoupling coefficients and modifying coefficients are defined as {NB，NS，ZO,PS,PB}.The fuzzy control rule table of adjusting decoupling coefficients is shown in Table 1. Table 1: fuzzy control rule table of adjusting decoupling coefficient。 3.3 Design of fuzzy controller FLCI and FLC2 Design of FLCI is the same as that of FLC2,so we only introduce the design of FLC 1.Two dimension fuzzy controller is adopted。Inputs of the fuzzy controller are error (E)and ratio of error change(EC).Output(U)is the control signal sent to the plant。Fuzzy sets of E,EC and U are defined as{NB,NM,NS,ZO,PS,PM,PB}and universe is chosen as {-6,-5,-4,-3,-2,-1,0,1,2,3,4, 5,6}.The membership function is the triangular function shown in Fig.8. Fig.8：membership function. In the dynamic extrusion process，we have gained such experiences “as if temperature is low，rising of temperature is slow，then heater power should be increased”，and “if temperature is high，rising of temperature is quick，then the heater should be stopped”。Based on manual experience，we get the fuzzy rules as following. (1)If E=NB or NM and EC=NB or NM then U=PB (2)If E=NB or NM and EC=NS or ZO then U=PB (3)If E=NB or NM and EC=PS then U=PM ………… According to the rules，we can get the fuzzy control table。After fuzzy decoupling，melt temperature is controlled by the averaged heater power and melt pressure is controlled by the screw speed。For melt temperature control，the output of the controller is directly transferred to the PWM signal，which is amplified to regulate the average power of heater。For melt pressure control，incremental method is adopted。Sample time for melt pressure is 20ms.Sample time for melt temperature is 500ms and period of the PWM signal is 10ms. 4 Implementation of the control system and experimental results 4.1 Implementation of the control system Hardware design of the control system includes the choice of the master controller，design of the interface circuit，design of the drive and amplifier circuit，and design of hand machine interface(HMI).According to the control requirements and the characteristics of the plant，B&R PCC2003 is chosen as the master controller，Programmable computer controller (PCC)has the standard functions of the Programmable logic controller(PLC) and has the time division multiplexing operating system of the industry computer。PCC can conveniently process the analogous and digital signals and is easy to configuration because of its modular structure. Program based on PCC can be developed with the advanced language and mixture of different languages。The configuration is shown in Fig.9. Fig.9: configuration of the control system. 4.2 Experimental results LLDPE is chosen as experimental material。The temperatures of heater 1-4 are set to be 165°C,180°C,180°C,and 175°C individually。Melt pressure is set to be 10Mpa and melt temperature is set to be 170°C.When the operation becomes stable，melt pressure is changed to 12Mpa.Fig.IO shows that actual pressure can quickly come to the set point while temperature remains to be 170°C.Fig.II shows that when melt temperature set point is changed to be 180°C,the response of melt temperature is quick。Melt temperature comes to the set point while melt pressure is almost remain unchanged.Fig.5 shows that the effect of the open loop control and melt pressure decreases rapidly with the rise of melt temperature。After adopting the fuzzy logic decoupling control，F(xiàn)ig.II verifies the validity of the new control method and melt pressure remains constant despite the variability of melt temperature.。The case is the same to melt temperature versus variability of melt pressure and details are omitted here. Fig.I0: change of melt pressure with unchanged melt temperature. Fig.1I: change of melt temperature with unchanged melt pressure. 5 Conclusions This paper investigated the decoupling control of melt pressure and melt temperature for the electromagnetism dynamic extruder。A new control algorithm based on fuzzy logic is introduced，which consists of fuzzy controller, decoupling compensator unit and fuzzy adjusting components Unit。The implementation of the control system is based on B&R PCC2003.Experimental results show that melt temperature and melt pressure can be successful individually controlled and verifies the validation of the fuzzy control strategy. Acknowledgements The authors gratefully acknowledge the Instrument Foundation of National Natural Science Foundation of China (No.20027002). References [I]Abdullah S.Alwadie，"Analysis，Design，and Tuning of the Two-Input Two-Output Fuzzy Control Systems Using the Simplified Fuzzy Rules"，Doctor of Philosophy,2003. [2]Ching-Chih Tsai，Member，IEEE，Chi-Huang Lu. "Multivariable Self-Tuning Temperature Control for Plastic Injection Molding Process"，IEEE Transactions on industry applications,34,2,310-318,1998. [3]Chi-Huang Lu；Ching-Chih Tsai." Adaptive decoupling predictive temperature control for an extrusion barrel in a plastic injection molding process"，IEEE Transactions on Industrial Electronics,48,5,968-975, 2001. [4]Dormeier，S. "Extruder control"，IFAC PRP 4 Automation，Ghent，Belgium,551-560,1980. [5]Qu Jinping，"The novel method and equipment for polymer extrude processing"，China Plastics,11,3,69-73,1997. [6]Rickey Dubay，Adam C.Bell，Yash P.Gupta."Control of plastic melt temperature:：A multiple input multiple output model predictive approach"，Polymer Engineering and Science,37,9,1150-1563,1997. [7]Sun qu，Li renhou."Fuzzy control of multivariable systems based on fuzzy dynamic model"，Acta Automatica Sinica, 27,5,719-723,2001. [8]Song zhi'an，Wang wenxin。"Diagrammatic Method of Transfer Function Identified by Step-up Response Curves"，Journal of Shandong University of Science& Technology(NaturalScience),22,1,61-63,2003. 中文譯文 模糊解耦控制熔體 溫度和熔體壓力塑料 電磁動態擠出機 文生平平 瞿金平 摘要 塑料電磁動態擠出機由于其新穎的結構和良好的工程業績已獲得廣泛的應用。在聚合物加工，熔融溫度和熔體壓力的控制對擠壓產品的質量至關重要。一種新的模糊解耦控制算法控制熔融溫度和熔體壓力的新型擠出機引進了系統傳遞函數矩陣， 這是通過對實驗數據與系統辨識來實現的。可編程計算控制器通過控制系統來執行。實驗結果表明通過加熱器功率和螺桿轉速調節能成功地對熔融溫度和熔體壓力進行單獨控制。良好的系統性能驗證了控制方法的有效性。 關鍵詞：熔體溫度，熔體壓力，模糊解耦控制，電磁動態擠出機 1導言 聚合物擠出是一個復雜的非線性多變量耦合過程。有許多因素影響擠壓工藝的穩定和擠出產品的質量，設備是關鍵因素。現在已經有許多種類的擠出機，與傳統的擠出機不同的是，瞿金平教授發明了一種新型的電磁動態擠出機。他介紹了振動力場到全過程的聚合物擠出，振動力場作用帶來了整個擠壓工藝新的變化的能量平衡，質量平衡，動量平衡?？刂普駝宇l率和振動幅度可有效控制動態擠壓過程。電磁動態擠出如圖1所示，對動態擠出機的研究表明這機器性能良好。 圖1：電磁動態塑化擠出機的結構。 1螺桿， 2機筒， 3轉子， 4定子， 5支撐座， 6漏斗 此外，擠出機熔體壓力和熔體溫度是變量擠出過程的關鍵。熔體壓力直接影響輸出制品的質量。雖然熔體溫度的波動會改變?nèi)垠w粘度和進而影響熔體壓力和流量。但是，在動態擠壓工藝中占主導地位的變量是熔體溫度和熔體壓力。為了獲得高質量的產品，傳統擠出機對熔體壓力和熔體溫度的控制已經應用了不同的控制方法。在20世紀70年代， 由Dormered首先介紹了數字PID控制熔化溫度串級控制。螺桿直徑是45毫米。由于硬件開發的限制，樣本時間為15s。梯級PID控制如圖2所示 。 圖2 ：熔體溫度串級PID控制。 20世紀90年代以來，現代控制理論已逐漸引入到對每段機筒壁溫度控制。里奇達貝、亞當角貝爾和佳日體育古普塔使用模型預測方法，建立了多輸入多輸出模式，溫度控制每段機筒的不同部分。蔡清池和盧紀宏研究了基于廣義預測算法多變量的機筒溫度控制。該數學模型的加熱過程依據能量平衡，中如圖3所示。盧紀宏還通過自適應預測控制用在每段機筒的溫度控制。其取得的成就主要是對傳統擠出機、熔融溫度和熔體壓力控制電磁動態擠出機、熔體溫度和熔體壓力控制的基礎上新的模糊控制算法的電磁動態擠出機進行了研究。 圖3 ：擠出機筒的物理模型 2 系統建模 電磁動態擠出機有五個加熱區。溫度的前四個加熱器由手動控制。新的控制策略所控制是加熱溫度。有5個熱電偶安裝在每段機筒內來衡量每段機筒溫度。一個紅外線溫度傳感器安裝在最近的熔體出口處以測量熔體溫度。測量熔體壓力的應變式壓力傳感器定位在模具壁。熔體壓力通過螺桿轉速控制。加熱器功率的芯片和螺桿轉速的熔體壓力和熔體溫度的階躍響應通過實驗獲得。圖4和圖5是實驗步驟反應熔體溫度。 圖4 ：熔體溫度階躍響應隨加熱器溫度的變化 圖5 ：熔體壓力階躍響應隨加熱器溫度的變化 加熱器功率和螺桿轉速的熔體壓力和熔體溫度響應是一個自我平衡系統。這響應是過阻尼。因此，該系統被視為二階系統，系統參數由實驗數據確定。 傳遞函數的二階自平衡系統與滯后表示為以下幾點： K是系統增益， T是延遲時間， T是時間常數，是阻尼比。 然后我們得到的傳遞函數查明實驗數據。 是熔體溫度和熔體壓力。 W為加熱器功率， n為螺桿轉速。 3模糊解耦控制算法 根據熔體溫度和熔體壓力耦合關系，我們得到一個模糊解耦控制器的熔融溫度和熔體壓力控制如圖6所示。 圖6 ：系統結構的模糊解耦控制 這里的和是的熔體溫度和熔體壓力實際產生值。和是對熔體溫度和熔體壓力設定值。整個系統由模糊控制器，解耦補償器和模糊調整部分。解耦系數d21和d12主要根據模糊調整部分確定，因此，耦合的兩個循環是可以消除的。 3.1解耦系數狀態下的穩定 在穩定狀態，根據方程2穩態增益矩陣，解耦補償給出了解耦系數所確定的原則 解耦系數[ 8 ]所確定的原則，解耦補償給出了 由（ 3 ）和（ 4 ） ，我們得到的解耦系數下的穩態 3.2調整動態解耦系數的進程 解耦系數來自上述穩態。它可以完全消除耦合熔體溫度和熔體壓力下的穩態。為了降低耦合下的動態過程，解耦系數應加以k控制。修改單位如圖7所示： 圖7 圖的多變量模糊控制與修改補償 該系統的輸出響應如下： 在這里， （ 1 = 1,2 ）是模糊控制器輸出，（ 1 = 1,2 ）是系統輸出增量，（i= 1,2 ; j = 1,2 ）是修改系數。 根據方程7 ，產量增量在時間步長n-1和N上可以表示為： 在消除一切從方程8 ， 可寫為： 同理可得： 為了消除與動態過程下循環之間的耦合，它必須讓。如果，那么這意味著解耦系數是不合理的。解耦系數根據模糊邏輯的修改系數調整的。模糊集的解耦系數和修改系數是指。模糊控制規則表的調整解耦系數如表1所示： 表1 ：模糊控制規則表的調整解耦系數。 3.3模糊控制器FLC1和FLC2的設計 FLC1的設計和FLC2一樣 ，所以我們只介紹FLC1的設計。二維模糊控制器獲得通過。對模糊控制器輸入錯誤的( E）和錯誤的比例變化（EC） 。輸出( U )是發送到工廠的控制信號。(E)、(EC)和(U)的模糊集被定義為{NB NM NS ZO PS PM PB}和天地寫為為 （-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6 ）。隸屬函數為三角形函數，如圖8所示 圖8 ：隸屬函數。 在動態擠出過程中，經驗告訴我們：“如果溫度低或者溫度上升緩慢，那么加熱器功率應增加”，“如果氣溫高，溫度上升很快，那么加熱器應停止加熱” ?；谝酝?jīng)驗，我們得到的模糊規則如下。 （ 1 ）如果E=NB或者NM和EC=NB或者NM然后U=PB （ 2 ）如果E=NB或者NM和EC=NS或者ZO接著U=PB （ 3 ）如果E=NB或者NM和EC=PS接著U=PM . . . . . 根據以上規則，我們可以得到的模糊控制表。 模糊解耦后，熔體溫度由加熱器平均功率控制，熔體壓力由螺桿轉速控制。對于熔體溫度控制，控制器的輸出直接移交給PWM信號，PWM被放大用于校正加熱器的平均功率。熔體壓力控制通過增量法獲得。熔體壓力的采樣時間為20ms，熔體溫度采樣時間為500ms，PWM的周期信號為10ms ， 4控制系統執行情況和實驗結果 4.1執行控制系統 控制系統的硬件設計包括選擇主控制器、接口電路設計、驅動器和放大器電路設計、和機器手的界面（ HMI ）設計 。根據控制要求和廠的特點，B&R PCC2003被評為主控制器?？删幊逃嬎銠C控制器（PCC）作為了可編程邏輯控制器（ PLC ）的標準功能配置，有時用于波分復用系統的工業計算機產業。PCC因其模塊化結構可以方便地處理類似的信號和數字信號，很容易配置。一個先進的語言和混合不同的語言計劃在PCC的基礎上發展起來，如圖9所示： 圖9 ：配置的控制系統。 4.2實驗結果 實驗材料是LLDPE。溫度加熱器1-4列分別設為165℃， 180℃，180℃ ，175 ℃。熔體壓力為10Mpa和熔體溫度為170 ℃，當操作變得穩定時熔體壓力改12Mpa 。圖10表明， 實際壓力迅速增加到設置點時的溫度仍然是170℃ 。圖11表明，當熔體溫度設定值更改為180℃時， 反應熔體溫度迅速增加到設置點，熔體的壓力幾乎保持不變。圖5表明，開環控制的效果和熔體壓力跌幅的快慢隨熔體溫度的變化。通過模糊邏輯解耦控制，驗證圖11改變?nèi)垠w壓力，熔體溫度保持不變的情況下新的控制方法的有效性。以改變?nèi)垠w溫度，不改變?nèi)垠w壓力與該例子方法是相同，具體細節這里省略。 圖10 ：改變?nèi)垠w壓力，熔體溫度不變。 圖11 ：改變?nèi)垠w溫度與不該變?nèi)垠w壓力。 5結論 本文討論了解耦控制熔體壓力和熔體溫度的電磁動態擠出機。介紹了一種基于模糊邏輯新的控制算法，其中包括模糊控制器，解耦補償器單元和模糊調整組成部分單元。執行控制系統是基于B&R PCC2003 。實驗結果表明，熔體溫度和熔體壓力能成功取得單獨控制和驗證了模糊控制方法的有效性。 鳴謝 作者非常感謝中國國家自然科學基金會儀器基金會（ No.20027002 ） 。 參考資料 [1] 阿卜杜拉南“基于經簡化的模糊規則雙輸入雙輸出模糊控制系統的分析，設計和調整” 哲學博士， 2003年。 [2] 蔡清池，IEEE協會會員，盧紀宏?！岸嘧兞孔孕Ｕ郎囟瓤刂扑芰献⑸涑尚凸に嚒?IEEE行業應用匯刊,34,2,310-318,1998 。 [3] 盧紀宏; 蔡清池?！白赃m應解耦預測溫度控制的擠壓每桶塑料注射成型過程” 工業電子電機及電子學工程師聯合會,48,5,968 - 975 ， 2001年。 [4] Dormeier.S, “擠出機控制” 國際會計師聯合會 比利時根特,551 - 560 ， 1980 。 [5] 瞿金平 “聚合物擠出設備加工的新方法” 中國塑料， 11,3,69 - 73,1997 。 [6] 亞當角貝爾，佳日體育古普塔?！翱刂扑芰先垠w溫度：一種多輸入多產出模型預測方法” 聚合物工程與科學,37,9,1150 - 1563年， 1997年。 [7] 孫曲，李仁厚?！盎谀：到y(tǒng)的動態模型的多變量模糊控制”自動化學報， .27,5,719-723,2001 。 [8] 宋志安 ，王文新?！坝脠D解方法解傳遞函數鑒定升壓反應曲線” 山東大學科學與工程技術學報（自然科學）,22,1,61-63,2003 。