《food control 格式要求》由會員分享，可在線閱讀，更多相關《food control 格式要求（12頁珍藏版）》請?jiān)谘b配圖網上搜索。

1、- Food Control is an international journal that provides essential information for those involved in foodsafety and process control.Food Control covers:? Microbial food safety and antimicrobial systems? Mycoto*ins? Hazard analysis, HACCP and food safety objectives? Risk assessment, including microb

2、ial risk assessment? Quality assurance and control? Good manufacturing practices? Food process systems design and control? Food Packaging? Rapid methods of analysis and detection, including sensor technology? Environmental control and safety? Codes of practice, legislation and international harmoniz

3、ation? Consumer issues? Education, training and research needs.The scope of Food Control is prehensive and includes original research papers, authoritativereviews, short munications, ment articles that report on new developments in food control,and position papers.The work described should be innova

4、tive either in the approach or in the methods used. Thesignificance of the results either for the science munity or for the food industry must also bespecified. Contributions that do not fulfil these requirements will not be considered for review andpublication. AUDIENCE. All managers, scientists,

5、 technologists, and legislators working in the food industry today IMPACT FACTOR. 2009: 2.463 ? Thomson Reuters Journal Citation Reports 2010 IMPACT FACTOR. 2009: 2.463 ? Thomson Reuters Journal Citation Reports 2010 EDITORIAL BOARD. Editor-in-Chief G. Campbell-Platt, University of Reading, R

6、eading, UK, Email: geoffreycampbell-platt.co.uk North American Editor J.J. Jen, California Polytechnic State University, San Luis Obispo, CA, USA, Email: forthamerica. Editorial Board Members L. Anelich, Anelich Consulting, Pretoria, South Africa D.L. Archer, University of Florida, Gainesville,

7、 FL, USA F. Busta, University of Minnesota, St. Paul, MN, USA A.A.G. Candlish, Glasgow Caledonian University, Glasgow, UK J. Chirife, Facultad de Ciencias Agrarias, Buenos Aires, Argentina G.W. Gould, Bedford, England, UK R. Greiner, Ma* Rubner-Institut (MRI), Karlsruhe, Germany B. Jarvis, Ros

8、s Biosciences Ltd, Ross-on-Wye, UK D.J. Jukes, University of Reading, Reading, UK C-H. Lee, Korea University, Seoul, South Korea F-K. Lücke, Fulda University of Applied Science, Fulda, Germany F. Meuser, Technische Universit?t Berlin (TUB), Berlin, Germany S. Mortimore, General Mills Europe, St

9、. Paul, MN, USA Y. Motarjemi, Nestlé Research Center, Vevey, Switzerland G. Moy, World Health Organization, Genève, Switzerland A. Pisula, Warsaw Agricultural University (S.G.G.W.), Warsaw, Poland W.A. Plahar, CSIR Food Research Institute, Accra, Ghana P. Rao, Fuzhou University, Fuzhou, Fujian,

10、 China G.L. Robertson, University of Queensland, Brisbane, QLD, Australia W.E.L. Spie?, Ma*-Rubner-Institut; Federal Institute for Nutrition, Karlsruhe, Germany G. Trystram, AgroParisTech, Massy Cede*, France P. Wall, University College Dublin, Dublin, Ireland R.J. Winger, Massey University, Al

11、bany, New Zealand C. Zaror, Universidad de Concepción, Concepcion, Chile GUIDE FOR AUTHORS. INTRODUCTION Food Control is an international journal that provides essential information for those involved in food safety and process control. Food Control covers: Microbial food safety and antimicro

12、bial systems Mycoto*ins Hazard analysis, HACCP and food safety objectives Risk assessment, including microbial risk assessment Quality assurance and control Good manufacturing practices Food process systems design and control Food Packaging Rapid methods of analysis and detection, including senso

13、r technology Environmental control and safety Codes of practice, legislation and international harmonization Consumer issues Education, training and research needs. The scope of Food Control is prehensive and includes original research papers, authoritative reviews, short munications, ment artic

14、les that report on new developments in food control, and position papers. The work described should be innovative either in the approach or in the methods used. The significance of the results either for the science munity or for the food industry must also be specified. Contributions that do no

15、t fulfil these requirements will not be considered for review and publication. Types of paper Original high-quality research papers (preferably no more than 7000 words, including tables and illustrations). Major review articles, up to 10,000 words Short munications of up to 3000 words, describi

16、ng work that may be of a preliminary nature but which merits immediate publication. Short reviews on topical subjects, up to 6000 words. ment articles not e*ceeding 2000 words. Authoritative position papers from e*pert groups are also wele. Food Control also publishes book reviews, Letters to the

17、 Editor, conference reports and a calendar of forthing events. The Editor-in-Chief has the right to decline formal review of a manuscript when it is deemed that the manuscript is 1) on a topic outside the scope of the Journal; 2) lacking technical merit; 3) of insufficient novelty for a wide int

18、ernational readership; 4) fragmentary and providing marginally incremental results; or 5) is poorly written. All contributions deemed suitable for review are read by two or more referees to ensure both accuracy and relevance, and revisions to the script may thus be required. On acceptance, contri

19、butions are subject to editorial amendment to suit house style. When a manuscript is returned for revision prior to final acceptance, the revised version must be submitted as soon as possible after the author's receipt of the referees' reports. Revised manuscripts returned after four months will

20、be considered as new submissions subject to full re-review. Contact details for submission Submission to this journal proceeds totally online. Use the following guidelines to prepare your article. Via the homepage of this journal ees.elsevier./foodcont you will be guided stepwise through the cr

21、eation and uploading of the various files. Page charges This journal has no page charges. BEFORE YOU BEGIN Ethics in Publishing For information on Ethics in Publishing and Ethical guidelines for journal publication see .elsevier./publishingethics and .elsevier./ethicalguidelines Conflict of i

22、nterest All authors are requested to disclose any actual or potential conflict of interest including any financial, personal or other relationships with other people or organizations within three years of beginning the submitted work that could inappropriately influence, or be perceived to influe

23、nce, their work. See also .elsevier./conflictsofinterest. Submission declaration and verification Submission of an article implies that the work described has not been published previously (e*cept in the form of an abstract or as part of a published lecture or academic thesis), that it is not u

24、nder consideration for publication elsewhere, that its publication is approved by all authors and tacitly or e*plicitly by the responsible authorities where the work was carried out, and that, if accepted, it will not be published elsewhere in the same form, in English or in any other language, i

25、ncluding electronically without the written consent of the copyright-holder. To verify originality, your article may be checked by the originality detection software iThenticate. See also .elsevier./editors/plagdetect. Changes to authorship This policy concerns the addition, deletion, or rearran

26、gement of author names in the authorship of accepted manuscripts: Before the accepted manuscript is published in an online issue: Requests to add or remove an author, or to rearrange the author names, must be sent to the Journal Manager from the corresponding author of the accepted manuscript an

27、d must include: (a) the reason the name should be added or removed, or the author names rearranged and (b) written confirmation (, fa*, letter) from all authors that they agree with the addition, removal or rearrangement. In the case of addition or removal of authors, this includes confirmation f

28、rom the author being added or removed. Requests that are not sent by the corresponding author will be forwarded by the Journal Manager to the corresponding author, who must follow the procedure as described above. Note that: (1) Journal Managers will inform the Journal Editors of any such request

29、s and (2) publication of the accepted manuscript in an online issue is suspended until authorship has been agreed. After the accepted manuscript is published in an online issue: Any requests to add, delete, or rearrange author names in an article published in an online issue will follow the same

30、policies as noted above and result in a corrigendum. Copyright Upon acceptance of an article, authors will be asked to plete a 'Journal Publishing Agreement' (for more information on this and copyright see .elsevier./copyright). Acceptance of the agreement will ensure the widest possible dissem

31、ination of information. An will be sent to the corresponding author confirming receipt of the manuscript together with a 'Journal Publishing Agreement' form or a link to the online version of this agreement. Subscribers may reproduce tables of contents or prepare lists of articles including abst

32、racts for internal circulation within their institutions. Permission of the Publisher is required for resale or distribution outside the institution and for all other derivative works, including pilations and translations (please consult .elsevier./permissions). If e*cerpts from other copyrighted

33、 works are included, the author(s) must obtain written permission from the copyright owners and credit the source(s) in the article. Elsevier has preprinted forms for use by authors in these cases: please consult .elsevier./permissions. Retained author rights As an author you (or your employer

34、or institution) retain certain rights; for details you are referred to: .elsevier./authorsrights. Role of the funding source You are requested to identify who provided financial support for the conduct of the research and/or preparation of the article and to briefly describe the role of the spon

35、sor(s), if any, in study design; in the collection, analysis and interpretation of data; in the writing of the report; and in the decision to submit the paper for publication. If the funding source(s) had no such involvement then this should be stated. Please see .elsevier./funding. Funding body

36、 agreements and policies Elsevier has established agreements and developed policies to allow authors whose articles appear in journals published by Elsevier, to ply with potential manuscript archiving requirements as specified as conditions of their grant awards. To learn more about e*isting agre

37、ements and policies please visit .elsevier./fundingbodies Open access This journal offers you the option of making your article freely available to all via the ScienceDirect platform. To prevent any conflict of interest, you can only make this choice after receiving notification that your artic

38、le has been accepted for publication. The fee of $3,000 e*cludes ta*es and other potential author fees such as color charges. In some cases, institutions and funding bodies have entered into agreement with Elsevier to meet these fees on behalf of their authors. Details of these agreements are ava

39、ilable at .elsevier./fundingbodies. Authors of accepted articles, who wish to take advantage of this option, should plete and submit the order form (available at .elsevier./locate/openaccessform.pdf). Whatever access option you choose, you retain many rights as an author, including the right to p

40、ost a revised personal version of your article on your own website. More information can be found here: .elsevier./authorsrights . Language and language services Please write your te*t in good English (American or British usage is accepted, but not a mi*ture of these). Authors who require inform

41、ation about language editing and copyediting services pre- and post-submission please visit webshop.elsevier./languageediting or our customer support site at support.elsevier. for more information. Submission Submission to this journal proceeds totally online and you will be guided stepwise thro

42、ugh the creation and uploading of your files. The system automatically converts source files to a single PDF file of the article, which is used in the peer-review process. Please note that even though manuscript source files are converted to PDF files at submission for the review process, these s

43、ource files are needed for further processing after acceptance. All correspondence, including notification of the Editor's decision and requests for revision, takes place by removing the need for a paper trail. Authors must provide and use an email address unique to themselves and not shared wit

44、h another author registered in EES, or a department. Referees Please submit, with the manuscript, the names, addresses and addresses of 3 potential referees. Note that the editor retains the sole right to decide whether or not the suggested reviewers are used. PREPARATION Use of wordprocessi

45、ng software It is important that the file be saved in the native format of the wordprocessor used. The te*t should be in single-column format. Keep the layout of the te*t as simple as possible. Most formatting codes will be removed and replaced on processing the article. In particular, do not use

46、 the wordprocessor's options to justify te*t or to hyphenate words. However, do use bold face, italics, subscripts, superscripts etc. When preparing tables, if you are using a table grid, use only one grid for each individual table and not a grid for each row. If no grid is used, use tabs, not sp

47、aces, to align columns. The electronic te*t should be prepared in a way very similar to that of conventional manuscripts (see also the Guide to Publishing with Elsevier: .elsevier./guidepublication). Note that source files of figures, tables and te*t graphics will be required whether or not you e

48、mbed your figures in the te*t. See also the section on Electronic illustrations. To avoid unnecessary errors you are strongly advised to use the "spell-check" and "grammar-check" functions of your wordprocessor. Every page of the manuscript should be numbered. Lines must be numbered consecutivel

49、y throughout the manuscript, not per page. Article structure Subdivision - numbered sections Divide your article into clearly defined and numbered sections. Subsections should be numbered 1.1 (then 1.1.1, 1.1.2, ...), 1.2, etc. (the abstract is not included in section numbering). Use this numb

50、ering also for internal cross-referencing: do not just refer to "the te*t". Any subsection may be given a brief heading. Each heading should appear on its own separate line. Introduction State the objectives of the work and provide an adequate background, avoiding a detailed literature survey or

51、 a summary of the results. Material and methodsProvide sufficient detail to allow the work to be reproduced. Methods already published should beindicated by a reference: only relevant modifications should be described.Theory/calculationA Theory section should e*tend, not repeat, the background to t

52、he article already dealt with in theIntroduction and lay the foundation for further work. In contrast, a Calculation section represents apractical development from a theoretical basis.ResultsResults should be clear and concise.DiscussionThis should e*plore the significance of the results of the work

53、, not repeat them. A bined Resultsand Discussion section is often appropriate. Avoid e*tensive citations and discussion of publishedliterature. Conclusions The main conclusions of the study may be presented in a short Conclusions section, which may stand alone or form a subsection of a Discussion

54、 or Results and Discussion section. Appendices If there is more than one appendi*, they should be identified as A, B, etc. Formulae and equations in appendices should be given separate numbering: Eq. (A.1), Eq. (A.2), etc.; in a subsequent appendi*, Eq. (B.1) and so on. Similarly for tables and

55、figures: Table A.1; Fig. A.1, etc. Essential title page information ? Title. Concise and informative. Titles are often used in information-retrieval systems. Avoid abbreviations and formulae where possible. ? Author names and affiliations. Where the family name may be ambiguous (e.g., a double

56、name), please indicate this clearly. Present the authors' affiliation addresses (where the actual work was done) below the names. Indicate all affiliations with a lower-case superscript letter immediately after the author's name and in front of the appropriate address. Provide the full postal addr

57、ess of each affiliation, including the country name, and, if available, the address of each author. ? Corresponding author. Clearly indicate who will handle correspondence at all stages of refereeing and publication, also post-publication. Ensure that telephone and fa* numbers (with country and

58、 area code) are provided in addition to the address and the plete postal address. Contact details must be kept up to date by the corresponding author. ? Present/permanent address. If an author has moved since the work described in the article was done, or was visiting at the time, a "Present add

59、ress" (or "Permanent address") may be indicated as a footnote to that author's name. The address at which the author actually did the work must be retained as the main, affiliation address. Superscript Arabic numerals are used for such footnotes. Abstract A concise and factual abstract is requir

60、ed. The abstract should state briefly the purpose of the research, the principal results and major conclusions. An abstract is often presented separately from the article, so it must be able to stand alone. For this reason, References should be avoided, but if essential, then cite the author(s) a

61、nd year(s). Also, non-standard or unmon abbreviations should be avoided, but if essential they must be defined at their first mention in the abstract itself. Keywords Immediately after the abstract, provide a ma*imum of 6 keywords, using American spelling and avoiding general and plural terms an

62、d multiple concepts (avoid, for e*ample, "and", "of"). Be sparing with abbreviations: only abbreviations firmly established in the field may be eligible. These keywords will be used for inde*ing purposes. Abbreviations Define abbreviations that are not standard in this field in a footnote to be

63、placed on the first page of the article. Such abbreviations that are unavoidable in the abstract must be defined at their first mention there, as well as in the footnote. Ensure consistency of abbreviations throughout the article. Acknowledgements Collate acknowledgements in a separate section a

64、t the end of the article before the references and do not, therefore, include them on the title page, as a footnote to the title or otherwise. List here those individuals who provided help during the research (e.g., providing language help, writing assistance or proof reading the article, etc.).

65、 Units Follow internationally accepted rules and conventions: use the international system of units (SI). If other units are mentioned, please give their equivalent in SI. Math formulae Present simple formulae in the line of normal te*t where possible and use the solidus (/) instead of a horizo

66、ntal line for small fractional terms, e.g., */Y. In principle, variables are to be presented in italics. Powers of e are often more conveniently denoted by e*p. Number consecutively any equations that have to be displayed separately from the te*t (if referred to e*plicitly in the te*t). Matematical and technical settings Use the appropriate number of significant figures to e*press your data - they should be justifiable and reflect the necessary level of accuracy of the method. A normal ma*i