購買設計請充值后下載，，資源目錄下的文件所見即所得，都可以點開預覽，，資料完整，充值下載可得到資源目錄里的所有文件。。?！咀ⅰ浚篸wg后綴為CAD圖紙，doc,docx為WORD文檔，原稿無水印，可編輯。。。具體請見文件預覽，有不明白之處，可咨詢QQ:12401814
河南理工大學萬方科技學院
本科畢業設計（論文）中期檢查表
指導教師： 韓曉明 職稱： 教授
所在院（系）： 機械與動力工程系 教研室（研究室）： 機械與動力工程部
題 目
采煤機搖臂設計
學生姓名
李繼釗
專業班級
08機設4班
學號
0828070064
一、選題質量：（主要從以下四個方面填寫：1、選題是否符合專業培養目標，能否體現綜合訓練要求；2、題目難易程度；3、題目工作量；4、題目與生產、科研、經濟、社會、文化及實驗室建設等實際的結合程度）
所選題目完全符合專業培養目標，涉及到許多已學過的專業知識。畢業設計是對
大學四年的所選專業知識的能力，提高綜合素質，以便更好地與實際相接軌。此
題目難易程度適中，適合本科生畢業設計的要求。在做畢業設計的過程中翻閱了大量
相關知識，對采煤機搖臂方面的知識有了比較系統的了解。
2、 開題報告完成情況：
畢業論文設計書已基本完成，大部分資料已找到
三、階段性成果：
搖臂整體設計方案以確定
各零件的數據已基本完成
已開始cad作圖
四、存在主要問題：
一些傳動系統的參數還不能確定
Cad作圖不是很熟悉
五、指導教師對學生在畢業實習中，勞動、學習紀律及畢業設計（論文）進展等方面的評語
指導教師： （簽名）
年 月 日
河南理工大學萬方科技學院
本科畢業設計（論文）開題報告
題目名稱
采煤機搖臂設計
學生姓名
李繼釗
專業班級
08機設4班
學號
0828070064
一、 選題的目的和意義：
采煤機是實現煤礦生產機械化和現代化的重要設備之一。機械化采煤可以減輕體力勞動、提高安全性，達到高產量、高效率、低消耗的目的。采煤機分鋸削式、刨削式、鉆削式和銑削式四種：采煤機是一個集機械、電氣和液壓為一體的大型復雜系統,工作環境惡劣,如果出現故障將會導致整個采煤工作的中斷,造成巨大的經濟損失.隨著煤炭工業的發展,采煤機的功能越來越多,其自身的結構、組成愈加復雜,因而發生故障的原因也隨之復雜。雙滾筒采煤機綜合了國內外薄煤層采煤機的成功經驗，是針對我國具體國情而設計的新型大功率薄煤層采煤機。
采煤機是煤炭工業的重要機械，近幾年隨著煤炭工業的發展，采煤機向著重型化方向發展。本設計主要是對采煤機搖臂進行設計，從而在實際的設計過程中，不斷地發現問題解決問題，使產品性能進一步提高，從而更好的適應煤炭工業的發展。
二、 國內外研究綜述：
20世紀40年代初，英國和前蘇聯相繼研制出了鏈?zhǔn)讲擅簷C，這種采煤機是通過截鏈截落煤，在截鏈上安裝有被稱為截齒的專用截煤工具，其工作效率低。同時德國研制出了用刨削方式落煤的刨煤機。50年代初，英國和德國相繼研制出了滾筒式采煤機，在這種采煤機上安裝有截煤滾筒，這是一種圓筒形部件，其上安裝有截齒，用截煤滾筒實現落煤和裝煤。這種采煤機與可彎曲輸送機配套，奠定了煤炭開采機械化的基礎。
這種采煤機的主要缺點有二點：其一是截煤滾筒的高度不能在使用中調整，對煤層厚度及其變化適應性差；其二是截煤滾筒的裝煤效果不佳，限制了采煤機生產率的提高。進入60年代，英國、德國、法國和前蘇聯先后對采煤機的截割滾筒做出革命性改進。其一是截煤滾筒可以在使用中調整其高度，完全解決對煤層賦存條件的適應性；其二是把圓筒形截割滾筒改進成螺旋葉片式截煤滾筒，即螺旋滾筒，極大地提高了裝煤效果。這兩項關鍵的改進是滾筒式采煤機稱為現代化采煤機械的基礎。
三、 畢業設計（論文）所用的主要技術與方法：
翻閱資料，調查文獻，模擬仿真，調查研究
四、 主要參考文獻與資料獲得情況：
李昌熙 沈立山 高榮 《采煤機》.煤炭工業出版社，1988
王啟廣 李炳文. 《采掘機械與支護設備》.中國礦業大學出版社，2006.4
王三民. 《機械設計計算手冊》.化學工業出版社，2009.1
濮良貴.《機械設計》.高等教育出版社，2005.12
主要在圖書館和網上查詢
五、 畢業設計（論文）進度安排（按周說明）
第1-2周，實習
第3-4周，提交實習報告
第5-6周，提交開題報告
第7-9周，初步擬定總體設計方案
第10-14周，主要設計階段
第15周，完成并修改論文
第16周，提交畢業論文
六、 指導教師審批意見：
指導教師： （簽名）
年 月 日
4
外文翻譯
英文翻譯
Switched Reluctance Motors Drive for the Electrical Traction in Shearer
Abstract—The paper presented the double Switched Reluctance motors parallel drive system for the electrical traction in shearer. The system components, such as the Switched Reluctance motor, the main circuit of the power converter and the controller, were described. The control strategies of the closed-loop rotor speed control with PI algorithm and balancing the distribution of the loads with fuzzy logic algorithm were given. The tests results were also presented. It is shown that the relative deviation of the average DC supplied current of the power converter in the Switched Reluctance motor 1 and in the Switched Reluctance motor 2 is within ±10%.
Keywords- switched reluctance; motor control; shearer; coal
mine; electrical drive
I. INTRODUCTION
The underground surroundings of the coal mines are very execrable. One side, it is the moist, high dust and inflammable surroundings. On the other side, the space of roadway is limited since it is necessary to save the investment of exploiting coal mines so that it is difficult to maintain the equipments. In the modern coal mines, the automatization equipments could be used widely. The faults of the automatization equipments could affect the production and the benefit of the coal mines. The shearer is the mining equipment that coal could be cut from the coal wall. The traditional shearer was driven by the hydrostatic transmission system. The fault ratio of the hydrostatic transmission system is high since the fluid in hydrostatic transmission system could be polluted easily. The faults of the hydrostatic transmission system could affect the production and the benefit of the coal mines directly. The fault ratio of the motor drive system is lower than that of the hydrostatic transmission system, but it is difficult to cool the motor drive system in coal mines since the motor drive system should be installed within the flameproof enclosure for safety protection. The motor drive system is also one of the pivotal parts in the automatization equipments. The development of the novel types of the motor drive system had been attached importance to by the coal mines. The Switched Reluctance motor drive could become the main equipments for adjustable speed electrical drive system in coal mines [1], because it has the high operational reliability and the fault tolerant ability [2]. The Switched Reluctance motor drive made up of the double-salient pole Switched Reluctance motor, the unipolar power converter and the controller is firm in the motor and in the power converter. There is no brush structure in the motor and no fault of ambipolar power converter in the power converter [3][4]. The Switched Reluctance motor drive could be operated at the condition of lacked phases fault depended on the independence of each phase in the motor and the power converter [5]. There is no winding in the rotor so that there is no copper loss in the loss and there is only little iron loss in the rotor. It is easy to cool the motor since it is not necessary to cool the rotor. The shearer driven by the
Switched Reluctance motor drive had been developed. The paper presented the developed prototype.
II. SYSTEM COMPONENTS
The developed Switched Reluctance motors drive for the electrical traction in shearer is a type of the double Switched Reluctance motors parallel drive system. The system is made up of two Switched Reluctance motors, a control box
installed the power converter and the controller. The adopted two Switched Reluctance motors are all three-phase 12/8 structure Switched Reluctance motor, which were shown in Figure 1. Figure 1. Photograph of the two three-phase
12/8 structure Switched Reluctance motor
The two Switched Reluctance motors were packing by the explosion-proof enclosure, respectively. The rated output power of one motor is 40 KW at the rotor speed 1155 r/min, and the adjustable speed range is from 100 r/min to 1500r/min.
The power converter consists of two three-phase asymmetric bridge power converter in parallel. The IGBTs were used as the main switches. Three-phase 380V AC power source was rectificated and supplied to the power converter. The main circuit of the power converter was shown in Figure 2.
In the controller, there were the rotor position detection circuit, the commutation circuit, the current and voltage protection circuit, the main switches’ gate driver circuit and the digital controller for rotor speed closed-loop and balancing the distribution of the loads.
III. CONTROL STRATEGY
The two Switched Reluctance motor could all drive the shearer by the transmission outfit in the same traction guide way so that the rotor speed of the two Switched Reluctance motors could be synchronized.
The closed-loop rotor speed control of the double Switched Reluctance motors parallel drive system could be implemented by PI algorithm. In the Switched Reluctance motor 1, the triggered signals of the main switches in the power converter are modulated by PWM signal, the comparison of the given rotor speed and the practical rotor speed are made and the duty ratio of PWM signal are regulated as follows,
where, ng is the given rotor speed, nf is the practical rotor
speed, e is the difference of the rotor speed, is the increment of the duty ratio of PWM signal of the Switched Reluctance motor 1 at k time, Ki is the integral coefficient, Kp is the proportion coefficient, ek is the difference of the rotor speed at k time, ek-1 is the difference of the rotor speed at k-1 time, D1(k) is the duty ratio of PWM signal of the Switched Reluctance motor 1 at k time, and D1(k-1) is the duty ratio of PWM signal of the Switched Reluctance motor 1 at k-1 time.
The output power of the Switched Reluctance motor
drive system is approximately in proportion to the
average DC supplied current of the power converter as
follows, where, P2 is the output power of the Switched Reluctance motor drive system, Iin is the average DC supplied current of the power converter.
In the Switched Reluctance motor 2, the triggered signals of the main switches in the power converter are also modulated by PWM signal. The balancing the distribution of the loads between the two Switched Reluctance motors could be implemented by fuzzy logic algorithm. In the fuzzy logic regulator, there are two input control parameters, one is the deviation of the average DC supplied current of the power converter between the two Switched Reluctance motors, and the other is the variation of the deviation of the average DC supplied current of the power converter between the two Switched Reluctance motors. The output control parameter is the increment of the duty ratio of the PWM signal of the Switched Reluctance motor 2. The block diagram of the double Switched Reluctance motors parallel drive system for the electrical traction in shearer was shown in Figure 3.
The deviation of the average DC supplied current of
the power converter between the two Switched Reluctance motors at the moment of ti is
:
where, ei-1 is the deviation of the average DC supplied
current of the power converter between the two Switched
Reluctance motors at the moment of ti-1. The duty ratio of the PWM signal of the Switched Reluctance motor 2 at the moment of ti is
where, is the increment of the duty ratio of the PWM signal of the Switched Reluctance motor 2 at the moment of ti and D2(i-1) is the duty ratio of the PWM signal of the Switched Reluctance motor 2 at the moment of ti-1.
The fuzzy logic algorithm could be expressed as
follows,
if and then U~ =
i = 1,2,…, m, j = 1,2, …,n
where, E~ is the fuzzy set of the deviation of the average DC supplied current of the power converter between the two Switched Reluctance motors, E~C is the fuzzy set of the variation of the deviation of the average DC supplied current of the power converter between the two Switched Reluctance motors, and U~ is the fuzzy set of the increment of the duty ratio of the PWM signal of the Switched Reluctance motor 2.
The continuous deviation of the average DC supplied current of the power converter between the two Switched Reluctance motors could be changed into the discrete amount at the interval [-5, +5], based on the equations as follows,
[ ]
The discrete increment of the duty ratio of PWM signal of the Switched Reluctance motor 2 at the interval [-5, +5] could be changed into the continuous amount at the interval [-1.0%, +1.0%], based on the equations as follows,
There is a decision forms of the fuzzy logic algorithm based on the above principles, which was stored in the programme storage cell of the controller.
While the difference of the distribution of the loads between the two Switched Reluctance motors could be got, the duty ratio of PWM signal of the Switched Reluctance motor 2 will be regulated based on the decision forms of the fuzzy logic algorithm and the distribution of the loads between the two Switched Reluctance motors could be balanced.
IV. TESTED RESULTS
The developed double Switched Reluctance motors parallel drive system prototype had been tested experimentally. Table I gives the tests results, where is the relative deviation of the average DC supplied current of the power converter in the Switched Reluctance motor 1, is the relative deviation of the average DC supplied current of the power converter in the Switched Reluctance motor 2, and,
×
It is shown that the relative deviation of the average DC supplied current of the power converter in the Switched
Reluctance motor 1 and in the Switched Reluctance motor
2 is within
V. CONCLUSION
The paper presented the double Switched Reluctance motors parallel drive system for the electrical traction in shearer. The novel type of the shearer in coal mines driven by the Switched Reluctance motors drive system contributes to reduce the fault ratio of the shearer, enhance the operational reliability of the shearer and increase the benefit of the coal mines directly. The drive type of the double Switched Reluctance motors parallel drive system could also contribute to enhance the operational reliability compared with the drive type of the single Switched Reluctance motor drive system.
中文譯文
開關磁阻電動機驅動電牽引采煤機
摘要-本文介紹了雙開關磁阻電動機并聯傳動系統控制驅動電牽引采煤機。 本文介紹了系統的各個組件，如開關磁阻電機，主電路中的功率變換器和控制器等。 這里給出了它的控制原理，它主要是用PI算法和載荷均勻分布的模糊算法獲得信號來控制電機轉速這樣一個閉環系統。 這里也列出了它的測試結果。測試結果表明，在磁阻電動機1上供應的平均直流電流于在磁阻電動機2上的相對誤差在10％以內。
關鍵詞：開關磁阻； 電機控制； 采煤機； 煤礦；電牽引。
1、導言
地下礦井周圍的環境是相當惡劣的。 一方面，它非常潮濕和高粉塵并且屬于易燃易爆環境。 而在另一方面，井下的空間是非常有限的，因為它要節約開采礦井的投資，所以這些給井下設備的維護帶來了很大的困難。 在現代煤礦開采過程中，自動化設備得到了廣泛的使用，但是自動化設備的故障，可以影響到煤礦的正常生產和生產效益。 采煤機是可以將煤從煤壁中開采下來的采礦設備。傳統的采煤機是用液壓傳動系統驅動的，但是由于液壓系統中的油液很容易被污染所以導致液壓系統的故障率很高。液壓傳動系統的故障可能直接影響礦井的生產和效益。電機驅動系統的故障率相對液壓傳動系統是比較低的，但是由于電機安裝在防暴外殼中所以給電機的冷卻帶來了困難。 電機驅動系統也自動化設備是其中的關鍵部件，所以發展新型電動機調速系統一直是煤礦開采重視的問題。 開關磁阻電機驅動之所以能成為煤礦主要設備的調速電氣傳動系統，[1] 因為它具有較高的運行可靠性和容錯能力[2] 。 開關磁阻電機驅動由雙凸極開關磁阻電機，單極功率變換器和控制器組成，它們被固定在電機和電力變換器中。 在電機中沒有電刷結構，并且雙極功率變換器的功率變換器的故障率比較低。 開關磁阻電動機可以用在電機和功率變換器相故障少，而且每種相故障取決于其本身的情況下。開關磁阻電機中沒有繞組轉子等，所以沒有銅損的損失，只有在轉動過程中很少的鐵損。這樣開關磁阻電機就很容易冷卻了，因為它沒有必要冷卻轉子。 采煤機用的開關磁阻電機驅動已經研制成功。 文章中給出了樣機。
二、系統組件
研制成功的驅動電牽引采煤機的開關磁阻電機驅動是一種雙重開關磁阻電動機并聯驅動的系統。 該系統是由兩個開關磁阻電動機和一個安裝功率變換器和控制器的控制箱。 通過兩個開關磁阻電動機都是三相12 / 8結構。開關磁阻電機如圖1所示。 兩個開關磁阻電動機都分別包在防爆外殼中。其中電機額定功率40千瓦，額定轉速1155轉/分鐘，調速范圍從100轉/分鐘到1500r/min 。
功率轉換包括兩個三相對稱橋功率轉換器并聯。 該IGBT的則作為主開關。 三相380V交流電源被整流并供應給電源轉換器。主電路中的功率變換器如圖2所示。IGBTS是主要使用的開關磁阻電機。
在控制器中，有轉子位置檢測電路，整流電路，電壓和電流的保護電路，主開關的柵極驅動電路和閉環轉速，負荷平衡分布的數字控制器。
三 控制策略
這兩個開關磁阻電機都可以在相同的牽引導軌上驅動所有采煤機的輸電裝備，因此這兩個開關磁阻電動機轉子的轉速就可以達到同步。
這個以閉環系統控制轉速的雙重開關磁阻電動機驅動系統時可以采用PI算法。 在開關磁阻電動機1中，功率變換器中主開關的觸發信號是通過調制PWM信號來給定的，當比較給定轉速和實際轉速時，所用占空比的PWM 信號，其規定如下：
在上式中，ng表示給定的轉速，nf表示實際的速度，e表示給定和實際轉速之間的偏差，表示開關磁阻電動機1在K時刻時PWM信號占空比的變化量，Ki表示積分系數，Kp是比例系數，ek表示在k時刻時轉子轉速的差值，ek－1表示在k－1時刻時轉子轉速的差別，D1(k)表示k時刻時開關磁阻電機1上PWM的占空比，D1(K-1)表示k－1時刻時開關磁阻電機1上PWM的占空比。
開關磁阻電動機調速系統的輸出功率是與所供應的直流電流成比例的，其轉換關系如下： 在此式中，P2是開關磁阻電動機調速系統的輸出功率，表示電源轉換器所供應的直流電流的平均值。
圖2 主電路中的功率轉換器
在開關磁阻電動機2 中，電源轉換中主開關的觸發信號也是通過PWM信號所給定的。 這兩開關磁阻電動機可以通過模糊邏輯算法來平衡其所承受的載荷。 在模糊邏輯算法的調節中，有兩個輸入控制參數，一個是電力轉換器供應這兩個開關磁阻電動機的直流電流平均值之間的偏差，另一個是電力轉換器供應這兩個開關磁阻電動機的直流電流平均值之間偏差的變化。 輸出參數是開關磁阻電動機 2的PWM信號占空比的增量。在圖3的方框圖中給出了電牽引采煤機中雙重開關磁阻電動機的并聯驅動系統。
在Ti時刻電力轉換器供應給這兩個開關磁阻電動機的直流電流的平均值的偏差為：：
上式中，ei-1表示在ti－1時刻電力轉換器供應給這兩個磁阻電動機開關的平均直流電流的偏差。在ti時刻開關磁阻電機2的PWM信號的占空比為：
上式中， 表示在ti時刻時開關磁阻電機2的PWM信號占空比的增量，表示在ti－1時刻時開關磁阻電機2的PWM信號的占空比。
圖3 電采煤機中的雙磁阻開關并聯系統方塊圖
這種模糊邏輯算法可以表示成如下形式：
if and then U~ =
i = 1,2,…, m, j = 1,2, …,n
上式中，表示電源轉換器供應給這一對開關磁阻電動機的平均直流電流的偏差的模糊值，表示電源轉換器供應給這兩個開關磁阻電動機的平均直流電流偏差的變化的模糊值，表示開關磁阻電動機2的PWM信號占空比增量的模糊值。
電力轉換器供應給這兩個開關磁阻電動機的平均直流電流之間的連續偏差可以在區間[ -5 ，+5 ]的范圍內變化，其理論根據如下：
在區間[-5 ，+5]范圍內，開關磁阻電動機2的PWM信號占空比的離散增量可以表示成在區間[-1.0%, +1.0%]內的連續變化，其理論根據如下：
基于上述原則模糊邏輯算法就形成了既定形式，這將被儲存在控制器的存儲空間中。
當這兩個開關磁阻電動機之間負載有差異時，基于模糊邏輯算法的既定形式開關磁阻電機2的PWM信號的占空比能夠得到調整，從而這兩個開關磁阻電動機上的負載便可以達到平衡。
四、測試結果
研制成功的雙開關磁阻電機并聯驅動系統樣機已經進行了測試實驗。 表一給出了測試結果，其中是開關磁阻電動機1中，供應給電源轉換開關的平均直流電流相對誤差，是開關磁阻電動機2中，供應給電源轉換開關的平均直流電流相對誤差。
測試結果表明，磁阻開關電動機中供給電源轉換開關的電流偏差在之內。
五、結論
文中描述了電牽引采煤用的雙開關磁阻電動機并聯傳動系統。 在礦區使用的開關磁阻電動機調速系統驅動的新型采煤機大大降低了采煤機的故障率，提高采煤機的運行可靠性能直接提高煤礦的經濟效益。 驅動型的雙重開關磁阻電動機并聯驅動系統相比驅動型的單一開關磁阻電動機調速系統也有助于提高運行可靠性。