購買設計請充值后下載，，資源目錄下的文件所見即所得，都可以點開預覽，，資料完整，充值下載可得到資源目錄里的所有文件。。。【注】：dwg后綴為CAD圖紙，doc,docx為WORD文檔，原稿無水印，可編輯。。。具體請見文件預覽，有不明白之處，可咨詢QQ:12401814
湖 南 科 技 大 學
畢業設計（論文）任務書
機電工程 學院 機械設計制造及其自動化 系（教研室）
系（教研室）主任: （簽名） 年 月 日
學生姓名: 賴文馨 學號: 1103010401 專業: 機械設計制造及其自動化
1 設計（論文）題目及專題： 5MW海上風電機組齒輪傳動系統設計
2設計（論文）時間：自 2014 年 10 月 17 日開始至 2015 年 06 月 01 日止
3 設計（論文）所用資源和參考資料：
① 5MW傳動系統葉片額定轉速12.1rpm，額定發電機轉速1173.7rpm，齒輪箱傳動比為97:1。(一級行星、二級斜齒輪)
② 國外REpower 5MW、Multibrid M5000等風電機組齒輪傳動系統的相關資料；相關教材，如《海上風力發電機組設計》、《風力機設計、制造與運行)》等；圖書館電子資源數據庫搜集到的期刊論文，博士、碩士學位論文等。
4 設計（論文）應完成的主要內容：
1) 完成5MW海上風電機組齒輪箱傳動形式、傳動比分配等設計與計算；
2) 完成傳動軸、齒輪、軸承等關鍵傳動零部件的選擇、設計、計算與校核；
3) 查閱相關文獻資料，撰寫開題報告；
4) 完成相關論文的翻譯(英譯中，不少于3000字)。
5 提交設計（論文）形式（設計說明與圖紙或論文等）及要求：
1) 完成5MW海上風電機組傳動系統設計，提供傳動系統3D模型，裝配圖、零件圖等共折合A0圖紙不少于2.5張；
2) 設計計算說明書一份，畢業設計說明書的書寫格式和版面要求參照《湖南科技大學本科生畢業設計（論文）要求與撰寫規范》，說明書不少于40頁。
6 發題時間： 2014 年 10 月 17 日
指導教師： （簽名）
學 生： （簽名）
湖 南 科 技 大 學
畢 業 設 計（ 論 文 ）
題目
5MW海上風電機組齒輪動系統設計
作者
賴文馨
學院
機電工程學院
專業
機械設計制造及其自動化
學號
1103010401
指導教師
沈意平
二〇一五年五月二十一日
附件2：任務書示例
湖 南 科 技 大 學
畢業設計（論文）任務書
機電工程學 院 系（教研室）
系（教研室）主任: （簽名） 年 月 日
學生姓名: 學號: 專業:
1 設計（論文）題目及專題：
2 學生設計（論文）時間：自 年 月 日開始至 年 月 日止
3 設計（論文）所用資源和參考資料：
4 設計（論文）應完成的主要內容：
5 提交設計（論文）形式（設計說明與圖紙或論文等）及要求：
6 發題時間： 年 月 日
指導教師： （簽名）
學 生： （簽名）
附件3：指導人評語示例
湖 南 科 技 大 學
畢業設計（論文）指導人評語
[主要對學生畢業設計（論文）的工作態度，研究?jī)?nèi)容與方法，工作量，文獻應用，創新性，實用性，科學性，文本（圖紙）規范程度，存在的不足等進行綜合評價]
指導人： （簽名）
年 月 日
指導人評定成績：
附件4：評閱人評語示例
湖 南 科 技 大 學
畢業設計（論文）評閱人評語
[主要對學生畢業設計（論文）的文本格式、圖紙規范程度，工作量，研究?jī)?nèi)容與方法，實用性與科學性，結論和存在的不足等進行綜合評價]
評閱人： （簽名）
年 月 日
評閱人評定成績：
附件5：答辯記錄示例
湖 南 科 技 大 學
畢業設計（論文）答辯記錄
日期：
學生： 學號： 班級：
題目：
提交畢業設計（論文）答辯委員會下列材料：
1 設計（論文）說明書 共 頁
2 設計（論文）圖 紙 共 頁
3 指導人、評閱人評語 共 頁
畢業設計（論文）答辯委員會評語：
[主要對學生畢業設計（論文）的研究思路，設計（論文）質量，文本圖紙規范程度和對設計（論文）的介紹，回答問題情況等進行綜合評價]
答辯委員會主任： （簽名）
委員： （簽名）
（簽名）
（簽名）
（簽名）
答辯成績：
總評成績：
湖南科技大學機電工程學院 2015屆畢業設計（論文）開題報告
題 目
5MW海上風電機組齒輪傳動系統設計
作者姓名
賴文馨
學號
1103010401
所學專業
機械設計制造及其自動化
1、 研究的意義：
當今社會隨著經濟日益發展，人們對能源的需求越來越大，而石油等不可再生能源也面臨枯竭，人們急需尋找替代能源。自然界中具有非常大的風能儲存量，由于太陽的輻射作用，地球每年大約可獲得的 地球每年大約可獲得 KW·h 的風能。其中，邊界層占整個大氣層的 35%，因而邊界層大氣中可利用的風能功率約為 KW，如果人類在近地面層能利用其中的十分之一，則全球可開發風能的功率為KW。這個值相當于 2005 年全球發電能力的 74.7 倍[1]。通過上述數據可知，風能是地球上最重要的能源之一，合理的開發利用風能可以解決越來越嚴重的能源短缺問題。風能作為一種清潔的、儲量極為豐富的可再生能源，在未來的能源市場很有開發潛力，各國政府相繼投入大量的人力及資金研究生產風力發電機，力圖設計出安全可靠高效的風力發電機。風力發電機中很重要的一部分就是齒輪傳動增速箱，如何把齒輪傳動系統設計好便成了關鍵問題
2、國內外現狀：
從20世紀70年代末以來，隨著世界各國對能源危機、環境保護等問題的日益關注，一致認為大規模發展利用風力發電是非常有效的措施之一。19 世紀末、丹麥最先開始探索風力發電、研制出風力發電機組直到20 世紀70 年代以前，只有小型充電用風力機達到實用階段。1973 年石油危機后，美國、歐洲等發達國家為尋求替代能源，投入大量經費，研制現代風力發電機組，開創了風能利用的新時期。世界風能委員會 11 日公布的一份報告指出，到 2010 年，全球風能發電能力將比現在提高一倍，達到 149.5 吉瓦。根據世界風能委員會的統計數據，僅在 2006年，全球風力發電能力就比上年增長了 25％，達到了 74 吉瓦。
歐洲一直以來是風力發電市場的領導者，目前在風能發電領域仍處在世界前列，而且在今后幾年其在風力發電實際運用及其國際市場上還將繼續保持領先地位，但隨著近年來世界其他國家和地區對風力發電的重視和發展，歐洲的領先優勢會有所下降。據世界風能委員會的統計，2004 年歐洲風力發電裝機容量占全世界風電總裝機容量的 72％，2005 年該比例就下降為 69％，而去年則又跌至 51％，到 2010 年，雖然整個歐洲的風力發電量將比目前的 48 吉瓦增長近一倍達到 82 吉瓦，但其占全球市場的份額則將下滑到 44％。這份報告還對 2006 年到 2010 年期間全球各地區風力發電態勢進行了預測。報告說，由于美國連續采取生產稅抵免等多項風能激勵措施，北美地區風力發電的發展仍將保持快速增長勢頭。緊隨其后的是風力發電的新興增長地區——亞洲，主要是中國和印度，亞洲將成為全球風能發電年增長幅度最快的地區之一，年增長將達 28.3％，其風力發電能力將從 2006 年的 10.7 吉兆增長到 2010 年的 29 吉兆。風力發電機單機裝機容量也從最初的 50KW，發展到 3.6MW，目前新建風場普遍采用 1.5MW 成熟機型，單機容量繼續穩步上升已成為風力發電機的發展趨勢[2]。
我國三北地區風能功率密度在 200～300W/m2以上，有的可達 500W/m2以上，如阿拉山口、達坂城、輝騰錫勒、錫林浩特的灰騰梁等、可利用的小時數在 5000小時以上，有的可達 7000 小時以上。東南沿海地區年有效風能功率密度在 200W/m2以上，將風能功率密度線平行于海岸線，沿海島嶼風能功率密度在 500 W/m2以上如臺山、平潭、東山、南鹿、大陳、嵊泗、南澳、馬祖、馬公、東沙等?？衫眯r(shí)數約在 7000-8000 小時。根據最新風能資源評價，我國陸地可利用風能資源 3 億千瓦，加上近岸海域可利用的風能資源，共計約 10 億千瓦，風能儲量非常豐富，開展風力發電是既經濟又高效的方式[3]。我國風力發電技術的研究始于 20 世紀 70 年代末 80 年代初，通過自主研發小型風力發電機解決廣大牧區牧民及一些島嶼上居民的生活生產用電。到 2006 年底，全國已建成約 90 個風電場，已經建成并網發電的風場主要分布在、內蒙、廣東、浙江、河北、遼寧等 16 個省區，裝機總?cè)萘窟_(dá)到約 260 萬千瓦。但與國際先進水平相比，國產風電機組單機容量較小，關鍵技術依賴進口，零部件的質量還有待提高。我國2009年新增風電裝機容量13800兆瓦(0.138億千瓦),同比增長高達124%，新增市場容量超過美國居全球第一；累計裝機容量連續第四年翻番,超越德國和西班牙，規模排在美國的 35159 兆瓦之後，位居世界第二。中國可再生能源協會風能專業委員會主任賀德馨在風能大會上亦稱,中國今年底風電裝機容量有望達到40000 兆瓦，去年底為 25800 兆瓦。到 2020 年時中國風電裝機容量有望達到 3 億千瓦左右，大幅高于官方最新預期的 2.3 億千瓦。由此可見，未來我國的風力發電發展前景非常良好，因此如何設計制造出安全高效的風力發電機就成了很重要的研究課題。
1、 研究目標、內容和擬解決的關鍵問題（根據任務要求進一步具體化）
研究目標：
（1） 對齒輪箱選用合理的結構、增速比和材料。設計質量好、重量輕、空間體積小、運行穩定的大容量風電機組齒輪傳動系統。
（2） 引用風力機的風輪葉片設計及塔架設計，從而完成整個風力發電機的設計。
主要內容：
本增速箱速箱的結構為二級行星，一級斜齒輪，根據設計任務書的要求合理分配各級傳動比，計算各級的齒輪參數，軸承參數，并進行校核。選出合理的軸承類型，并對增速箱尺寸進行計算，以及將各個部分裝配起來。
進程：
第一階段：開題階段 3月9日至3月20日，收集、查閱和整理設計資料，完成3000字的文獻翻譯，完成畢業實習報告和開題報告。
第二階段：設計階段 3月21日-3月28 日，齒輪傳動系統方案選擇、傳動比分配，傳動結構造型等整體方案設計與計算。
第三階段：計算階段 3月29日至4月15日，齒輪、軸、軸承等關鍵傳動結構件的設計計算，繪制零件圖。
第四階段：繪圖階段 4月16日至5月 5日，傳動系統裝配圖繪制。
第五階段：畢業答辯 5月6日至 5月25日，設計計算說明書的編制、整理、修改、定稿，準備答辯
解決的關鍵問題
風力發電機床系統主要是將能量由葉輪傳遞至發電機。傳動系統主要包括主軸、主軸承、齒輪箱、高速軸、聯軸器等部件。而本課題的主要部分是對風電機傳動系統的設計，所以有可能遇到的主要問題：
（1）準確對傳動方案的分析；
（2）確定齒輪箱的傳動比的分配；
（3）齒輪尺寸參數的確定
（4）對軸承的尺寸進行確定；
（5）選擇合理的軸承類型；
（6）對箱體和總體結構的確定；
（7）對箱體主要部件載荷的計算和校核；
（8）確定冷卻溫度和潤滑系統；
（9）對整個部件的裝配圖和零件圖的繪制；
這些問題都是設計該風機傳動系統的關鍵問題，在設計過程中，將通過查閱有關文獻資料和向老師咨詢的方法來解決。
2、 特色與創新之處：
我國的風力事業由于起步晚，特比是兆瓦級風電機齒輪箱，主要生產設備長期依賴進口。在自主開發風力大型容量發電機等方面還比較落后，特別是像齒輪傳動系統等技術領域還存在很大的差異。為此希望減少此差距。
按照現在風機裝機要求，在考慮重量、體積、運行穩定性的多種情況下，設計合理的齒輪箱和增速比，采用合理的材料提高運行的壽命。同時在設計繪制零件圖和裝配圖時廣泛運用CAD/CAM/CAE技術和Pro/e軟件，以提要傳動系統運行的精度、可靠性、降低傳動系統制造成本，提高傳動系統標準化水平和傳動系統標準件的使用率。
在本次畢業設計，本人將全部應用CAD/CAE/CAM技術和soliworks軟件來設計傳動系統。利用CAD軟件繪制二維裝配圖和零件圖，利用soliworks軟件繪制三維裝配圖和零件圖；大大縮短了設計時間以及畫圖時間，并提高了設計精度還有減小誤差。
3、 擬采取的研究方法、步驟、技術路線
(1)查閱資料，熟悉國內外風電機及其傳動系統齒輪箱的現狀和發展趨勢。
(2)理解風電傳動系統齒輪箱工作原理及結構分析，確定齒輪箱總裝設計思路。
(3)建立準確的分析模型，準確求解受載輪齒的載荷分布。?
(4)完成主要零部件設計并進行強度校核。
(5)繪制零件加工圖，選定加工工藝。?
(6)編寫設計說明書。
4、 擬使用的主要設計、分析軟件及儀器設備
主要設計、分析軟件：
CAD軟件（繪制二維裝配圖和零件圖）
soliworks軟件（繪制三維裝配圖和零件圖）
儀器設備：
本課題主要是對大容量風電機組齒輪傳動系統進行三維設計，所采用的設備儀器是普通計算機。
5、 參考文獻
B：
[1] 潘存云， 機械原理[M]、 長沙、 中南大學出版社、 2011
[2]、林景堯、 風能設備使用手冊、 北京、 機械工業出版社、 1992
[3]、芮曉明、 風力發電機組設計． 北京、 機械工業出版社 、2010?
[4]、姚興佳、 風力發電機組原理與應用．北京、 機械工業出版社、 2009
[5]、趙振宙、 風力發電機原理與應用、北京、 中國水利水電出版社、2011
[6]、Tony?Burton 、風能技術、 北京、 科學出版社、 2007
[7]、牛山 泉、風能技術、 北京、 科學出版社、 2009
[8]、諾邁士、 風電傳動系統的設計與分析、 上海、上海科學技術出版社、2013
[9]、李俊峰、 風力 北京、 化學工業出版社、2005
[10]、李 斌、 未來世界風電發展大趨勢[J]、北京、哈爾濱大電機研究所、2008
[11]、劉忠明、風力發電機齒輪箱設計制造技術的發展與展望[J]、機械傳動、2006
[12]、成大先、機械設計手冊第三卷、 北京、 化學工業出版社、1993
[13]、葉偉昌、機械工程及自動化簡明設計手冊、 機械工業出版社
[14]、關慧貞、機械制造裝備設計、 北京、 機械工業出版社
[15]、濮良貴 紀名剛、 機械設計、 北京、 高等教育出版社
注：
1、開題報告是本科生畢業設計（論文）的一個重要組成部分。學生應根據畢業設計（論文）任務書的要求和文獻調研結果，在開始撰寫論文之前寫出開題報告。
2、參考文獻按下列格式（A為期刊，B為專著）
A：[序號]、作者（外文姓前名后，名縮寫，不加縮寫點，3人以上作者只寫前3人，后用“等”代替。）、題名、期刊名（外文可縮寫，不加縮寫點）年份、卷號（期號）：起止頁碼。
B：[序號]、作者、書名、版次、（初版不寫）、出版地、出版單位、出版時間、頁碼。
3、表中各項可加附頁。
5
NOTICE
The submitted manuscript has been offered by an employee of the Midwest Research Institute (MRI), a contractor of the US Government under Contract No. DE-AC36-99GO10337. Accordingly, the US Government and MRI retain a nonexclusive royalty-free license to publish or reproduce the published form of this contribution, or allow others to do so, for US Government purposes.
This report was prepared as an account of work sponsored by an agency of the United States government. Neither the United States government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States government or any agency thereof. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States government or any agency thereof.
Available electronically at http://www.osti.gov/bridge
Available for a processing fee to U.S. Department of Energy and its contractors, in This paper describes a new research and development initiative to improve gearbox reliability in wind turbines begun at the National Renewable Energy Laboratory (NREL) in Golden, Colorado, USA. The approach involves a collaboration of NREL staff, expert consultants, and partners from the wind energy industry who have an interest in improving gearbox reliability. The membership of this collaborative is still growing as the project becomes more defined, but the goal is to include representatives ranging from the operators, owners, wind turbine manufacturers, gearbox manufacturers, bearing manufacturers, consultants, and lubrication industries. The project is envisioned to be a multi-year comprehensive testing and analysis effort. This will include complementary laboratory and field testing on a 600 to 750-kW turbine and gearbox of a configuration that exhibits reliability problems common to a broad population of turbines. The project will target deficiencies in the design process that are contributing to substantial shortfalls in service life for most designs. New design-analysis tools will be developed to model the test configuration in detail. This will include using multi-body dynamic analysis to model wind turbine loading, coupled to internal loading and deformations of the gearbox. Intellectual property conflicts will be minimized by maintaining a test configuration that does not replicate any specific manufacturer’s wind turbine model precisely, but represents a common configuration.
Background
The wind energy industry has experienced high gearbox failure rates from its inception [1]. Early wind turbine designs were fraught with fundamental gearbox design errors compounded by consistent under-estimation of the operating loads. The industry has learned from these problems over the past two decades with wind turbine manufacturers, gear designers, bearing manufacturers, consultants, and lubrication engineers all working together to improve load prediction, design, fabrication, and operation. This collaboration has resulted in internationally recognized gearbox wind turbine design standards [2]. Despite reasonable adherence to these accepted design practices, wind turbine gearboxes have yet to achieve their design life goals of twenty years, with most systems requiring significant repair or overhaul well before the intended life is reached [3,4,5]. Since gearboxes are one of the most expensive components of the wind turbine system, the higherthan-expected failure rates are adding to the cost of wind energy. In addition, the future uncertainty of gearbox life expectancy is contributing to wind turbine price escalation. Turbine manufacturers add large contingencies to the sales price to cover the warranty risk due to the possibility of premature gearbox failures. In addition, owners and operators build contingency funds into the project financing and income expectations for problems that may show up after the warranty expires. To help bring the cost of wind energy back to a decreasing trajectory, a significant increase in long-term gearbox reliability needs to be demonstrated.
In response to design deficiencies, modification and redesign of existing turbines is a continual process in current production units, but it is difficult to validate the effectiveness of the modifications in a timely manner to assure that multiple units with unsatisfactory “solutions” are not deployed. Presently, gear manufacturers introduce modifications to new models, replacing a deficient component with a re-engineered one that is
1 thought to deliver higher performance. To test these new designs, the re-engineered gearboxes are installed and a field evaluation process begins. This approach may eventually lead to the reliability goals needed, but it may take many years to develop the needed confidence in a solution, and reduce the uncertainty to a level where it will reduce turbine costs. By that time, the wind turbine industry may have moved to larger turbines or different drivetrain arrangements that could invalidate these solutions. Moreover, the fundamental failure mechanisms of the original problem may never be understood, making it easier for design unknowns to be inadvertently propagated into the next generation of machines.
This paper summarizes a long-term NREL/DOE project to explore options to accelerate improvements in wind turbine gearbox reliability by addressing the problems directly within the design process. In the execution of this program, our intentions are to improve the accuracy of dynamic gearbox testing to assess gearbox and drivetrain options, problems, and solutions under simulated field conditions. The project will evaluate the wide range of possible load events that comprise the design load spectrum [6], and how critical design-load cases
[7] may translate into unintended bearing and gear responses such as misalignment, bearing slip, and axial motion.
NREL has made a commitment to address gearbox reliability as a major part of its research agenda, and plans to engage a wide range of stakeholders including researchers, consultants, bearing manufacturers, gearbox manufacturers, wind turbine manufacturers, and wind turbine owner/operators to form a gearbox reliability collaborative (GRC). The collaborative will address major gearbox issues with the common goal of increasing overall reliability of wind turbines. The approach will involve three major technical efforts which include field testing, dynamometer testing, and drivetrain analysis. These elements make up a comprehensive strategy that will address the true nature of the problem and hopefully spark a spirit of cooperation that can lead to better gearboxes.
Observations on the Basic Problems
While it is premature to draw firm conclusions about the nature of these failures, some reasonable observations have been made to help narrow the course and scope of this project.
1. Most of the problems with the current fleet of wind turbine gearboxes are generic in nature, meaning that the problems are not specific to a single gear manufacturer or turbine model. Over the years, most wind turbine gearbox designs have converged to a similar architecture with only a few exceptions. Therefore, there is an opportunity to collaborate among the many stakeholders in the wind turbine gearbox supply chain to find root causes of failures and investigate solutions that may advance the collective understanding of the industry.
2. The preponderance of gearbox failures suggests that poor adherence to accepted gear industry practices, or otherwise poor workmanship, is NOT the primary source of failures. Of course, some failures have been directly attributed to quality issues, and further improvements in this area are not precluded from consideration, but we assume that manufacturers are capable of identifying and correcting quality control problems on their own if they choose to do so. Therefore, the target of this project will be the greater problem of identifying and correcting deficiencies in the design process that may be diminishing the life of the fleet.
3. Most gearbox failures do not begin as gear failures or gear-tooth design deficiencies. The observed failures appear to initiate at several specific bearing locations under certain applications, which may later advance into the gear teeth as bearing debris and excess clearances cause surface wear and misalignments. Anecdotally, field-failure assessments indicate that up to 10% of gearbox failures may be manufacturing anomalies and quality issues that are gear related, but this is not the primary source of the problem.
4. The majority of wind turbine gearbox failures appear to initiate in the bearings. These failures are occurring in spite of the fact that most gearboxes have been designed and developed using the best bearing-design practices available. Therefore, the initial focus of this project will be on discovering weaknesses in wind turbine gearbox bearing applications and deficiencies in the design process.
2 Furthermore, we believe that the problems that manifested themselves in the earlier 500-kW to 1000kW sizes five to ten years ago still exist in many of the larger 1 to 2 MW gearboxes being built today with the same architecture. As such, it is likely that lessons learned in solving problems on the smaller scale can be applied directly to future wind turbines at a larger scale, but with less cost.
Using these observations to help bound the problem, we reason that the accepted design practices that are applied successfully throughout other industrial bearing applications must be deficient when applied to wind turbine gearboxes. This characterization is based primarily on anecdotal field-failure data, and the experience of gear and bearing experts who have studied the problems for many years. Unfortunately, the available analytical methods to assess design life in typical gearbox designs are not accurate enough to shed much light on this problem, so much of the investigation must be conducted empirically.
A major factor contributing to the complexity of the problem is that much of the bearing design-life assessment process is proprietary to the bearing manufacturers. Gearbox designers, working with the bearing manufacturers, initially select the bearing for a particular location and determine the specifications for rating. The bearing manufacturer then conducts a fatigue life rating analysis to determine if the correct bearing has been selected for the specific application and location. Generally, a high degree of faith is required to accept the outcome of this analysis because it is done with little transparency. Even though bearing manufacturers claim adherence to international bearing- rating standards (ISO 281:2007 [8]), each manufacturer uses its internally developed design codes that have the potential to introduce significant differences that can affect actual calculated bearing life without revealing the details to customers. A new code is needed in the public domain that will give the industry a common method for due diligence in bearing design [9].
Moreover, since the bearing manufacturers do not have broad or intimate knowledge of gearbox system loads and responses that may be contributing to unpredicted bearing behavior beyond the bearing mounting location such as housing deformations, they are not capable of making valid root-cause analyses on their own. A broader collaboration of the various stakeholders, each of whom holds a piece of the answer, is clearly needed.
Gearbox Reliability Collaborative
Many of the gearbox problems described above may be the direct result of institutional barriers that hinder communication and feedback during the design, operation, and maintenance of turbines. In isolation, it is very difficult for single entities in the supply chain to find proper solutions. Hence, a collaborative is needed to bring together the various portions of the design process, and to share information needed to address the problems. This promises to be one of the more challenging parts of this project, as information sharing introduces perceived risk to the protection of intellectual property, which is guarded dearly by most companies. A goal of this project is to establish this cooperative framework while protecting the intellectual property rights of all parties. These concerns will be addressed through legal agreements with NREL, and will be further mitigated since the project does not focus on any manufacturer’s specific design. The collaborative is operated by NREL staff and expert consultants hired by NREL to guarantee privacy of commercially sensitive information and data. In addition, a goal of the collaborative is to engage key representatives of the supply chain, including turbine owners, operators, gearbox manufacturers, bearing manufacturers, lubrication companies, and wind turbine manufacturers. Each party holds information and experience that is needed to guide the project, supply the components, and interpret results of the test. The collaborative partners will benefit by having input throughout the testing setup and execution, and will have access to data within the agreements established by the cooperative. Results will be released by the GRC as agreed upon by its members.
Generic Wind Turbine Drivetrain Architecture
The selected configuration is comprised of a single main bearing upwind of the gearbox with rear non-locating support bearings inside the gearbox. Trunnion mounts on either side of the gearbox are used to attach it to a mainframe or bedplate, typically through elastomeric bushings used to dampen noise and vibrations. Torque reactions are resolved through the trunnion support assembly that is normally an integral part of the gear housing. The external geometry of this configuration is shown in
The low speed stage of the gearbox is a planetary configuration with either spur or helical gears. The sun pinion drives a parallel intermediate shaft that in turn drives a high speed stage. Both the intermediate and high speed stages use helical gears. A generalized schematic of a typical wind turbine gearbox is shown in Figure 2. 4
Critical bearing locations are defined as places that have exhibited a high percentage of application failures in spite of the use of best current design practices. In the generic configuration, there are three critical bearing locations that we have identified:
1. Planet bearings
2. Intermediate shaft-locating bearings
3. High-speed locating bearings
Each location has exhibited a relatively high degree of bearing failures with a relatively low dependence on machine size, machine make, or model.
A Three Point Plan
As previously mentioned, some aspects of the wind turbine, gearbox, and bearing design process are preventing gearboxes from reaching expected life. These deficiencies could be the result of many factors, including:
? the possibility that one or more critical design-load cases were not accounted for in the design load spectrum,
? that transfer of loads (both primary torque loads and non-torque loads) from the shaft and mounting reactions is occurring in a non-linear or unpredicted manner, or
? that components within the gearbox (especially the bearings) are not uniformly specified to deliver the same level of reliability.
Due to the complexity of this problem, a comprehensive approach that expands our existing base of knowledge and capabilities will be required. Under this project, NREL plans an integrated three-pronged approach of analysis, dynamometer testing, and field testing as shown in Figure 3.
Figure 3 - Comprehensive Strategy to Investigate Wind Turbine Gearbox Reliability
5 Laboratory testing of a representative instrumented drivetrain in the NREL 2.5-MW dynamometer will be coordinated with parallel field tests on an identical instrumented drivetrain conducted at a nearby wind farm site. With the benefit of hindsight, the selected drivetrain will be upgraded prior to testing to current state-ofthe-art to eliminate known design weaknesses and quality issues as best as possible. These upgrades may include different bearing types, cooling and filtration system upgrades, lubrication changes, and gear tooth modifications. The test specimens will therefore not be precise representations of any manufacturer’s design. The laboratory and field measurements will be validated with dynamic analysis using an accurate structural-system model of the selected drivetrain.
The test will be based on a 600 to 750-kW wind turbine selected by a committee of expert gearbox consultants hired by NREL under the GRC. The exact details of the drivetrain to be tested and analyzed are confidential to the members of the GRC. Project success will be highly dependent on making the right measurements that correctly characterize the behavior of the critical bearings under various loading scenarios. Instruments will be developed and installed to capture data about significant loads, deflections, thermal effects, dynamic responses and events, and changes to the condition of the lubricant.
Critical loads measurements will include shaft bending and torque on the input shafts, but also measurements of how load sharing varies dynamically from one planet bearing to another. Similarly, measurements will be made to determine how the load is being shared between bearings axially along a single planet shaft. Displacement sensors to make continuous measurements will be installed internally, if possible, wherever gear tooth clearances or alignments of the gears might be affected. These locations may include bearing inner ring to outer ring alignments and clearances, shaft axial motions, bearing slip (inner or outer motions or bearing components), roller slipping or skidding, combined roller slip, relative motion of carrier to housing, sun pinion displacement relative to carrier, sun-pinion axial motion, housing stiffness, and displacement measurements of housing. We anticipate that certain locations will be difficult to access with standard instrumentation. Temperature measurements will be made at all critical bearing locations, including the inner rings, the outer rings, and planet bearings. Lubrication monitoring will include bulk sump temperature, cleanliness (e.g., particulate, ferrous, additive, and water), and filter debris. Laboratory analysis will be conducted frequently on all test specimens.
The test data will be analyzed and correlated to look for bearing behavior that is unexpected, non-linear, or is suspect under a wide range of input conditions. If this behavior can be correctly documented and understood, it may not be necessary to reproduce every type of bearing failure if subsequent analysis can demonstrate that certain abnormal behavior can result in loss of bearing life.
Dynamometer Testing
The National Renewable Energy Laboratory operates a 2.5-MW dynamometer test facility funded by the U.S. Department of Energy at its National Wind Technology Center in Golden, CO that is dedicated to the testing of wind turbine drive trains [12]. Since 1999, this facility has been in continuous operation providing testing services to prototype and production wind turbine drive trains up to 2 MW in size. NREL plans to use this facility and its support staff to conduct full-scale tests on the 750-kW drivetrain selected. A schematic of the facility is shown in Figure 4.
One of the benefits of using a full scale drive-train