購買設計請充值后下載，，資源目錄下的文件所見即所得，都可以點開預覽，，資料完整，充值下載可得到資源目錄里的所有文件。。?！咀ⅰ浚篸wg后綴為CAD圖紙，doc,docx為WORD文檔，原稿無水印，可編輯。。。具體請見文件預覽，有不明白之處，可咨詢QQ:12401814
河南機電高等?？茖W(xué)校
畢業設計（論文）任務書
系 部：
專 業：
學生姓名: 學 號:
設計(論文)題目： 油管接頭注塑模設計
起 迄 日 期: 2006年 4 月 03 日~ 5月10日
指 導 教 師:
發任務書日期: 2006年 4 月 3 日
畢 業 設 計（論 文）任 務 書
1．本畢業設計（論文）課題來源及應達到的目的：
該課題來源于楊占堯老師主編的《塑料模具設計圖冊》P244—油管接頭注塑模。
在完成該課題之后，應對注塑工藝生產較為熟悉，能熟練掌握相關設計手冊的使用，能獨立完成一套模具的設計及模具工作零件加工工藝的編制，能夠運用模具設計軟件完成模具裝配圖及零件圖的繪制。
2．本畢業設計（論文）課題任務的內容和要求（包括原始數據、技術要求、工作要求等）：
（1）了解目前國內外塑料模具的發展現狀；
（2）塑件的結構工藝分析；
（3）油管接頭注塑模設計，并編寫設計說明書一份；
（4）繪制模具總裝圖一張，并畫出非標準零件的零件圖；
（5）編制主要零件加工工藝過程卡。
原始資料：
塑件圖及其尺寸如右圖所示，
材料：POM
生產批量：中等批量
所在專業審查意見：
負責人：
年 月 日
系部意見：
系領導：
年 月 日
河南機電高等?？茖W(xué)校
畢業設計論文
論文題目：油管接頭注塑模具設計
系 部： 材料工程系
專 業：模具設計與制造
班 級：
學生姓名：
學 號：
指導教師：
2006年05月13日
目錄
前 言 1
第1章 模塑工藝規程的編制 4
1.1 塑件的工藝性分析 4
1.2 計算塑件的體積和重量 5
1.3塑件注塑工藝參數的確定 5
第2章 注塑模的結構設計 6
2.1 分型面的選擇 6
2.2 確定型腔的排列方式 7
2.3 澆注系統設計 8
2.4 抽芯機構設計 9
2.5 成型零件結構設計 11
第3章 模具設計的有關計算 13
3.1 型腔和型芯工作尺寸計算 13
3.2 螺紋瓣合塊的尺寸計算 13
第4章 模具冷卻與加熱系統的計算 16
第5章 模具閉合高度的確定 17
第6章 注塑機有關參數的校核 18
第7章 繪制模具總裝圖和非標準零件工作圖 19
第8章 注塑模主要零件加工工藝規程的編制 20
第9章 注塑模的裝配 21
第10章 試模 22
小 結 23
致 謝 24
參考文獻 25
- 2 -
附 錄
圖1 注塑模裝配圖 圖2 注塑模開模圖
圖3 定模 圖4 動模
桂林電子科技大學畢業設計（論文）外文翻譯譯文 第10頁 共22頁
編號：
畢業設計(論文)外文翻譯
（原文）
學 院： 國防生學院
專 業： 機械設計制造及其自動化
學生姓名： 匡鵬來
學 號： 1000110105
指導教師單位： 機電工程學院
姓 名： 曹泰山
職 稱： 講 師
2014年 3 月 9 日
桂林電子科技大學畢業設計（論文）外文翻譯譯文 第27頁 共28頁
technical note on the characterization of electroformed nickel shells for their application to injection molds
——aUniversidad de Las Palmas de Gran Canaria, Departamento de Ingenieria Mecanica, Spain
Abstract
The techniques of rapid prototyping and rapid tooling have been widely developed during the last years. In this article, electroforming as a procedure to make cores for plastics injection molds is analysed. Shells are obtained from models manufactured through rapid prototyping using the FDM system. The main objective is to analyze the mechanical features of electroformed nickel shells, studying different aspects related to their metallographic structure, hardness, internal stresses and possible failures, by relating these features to the parameters of production of the shells with an electroforming equipment. Finally a core was tested in an injection mold.
Keywords: Electroplating; Electroforming; Microstructure; Nickel
1. Introduction
One of the most important challenges with which modern industry comes across is to offer the consumer better products with outstanding variety and time variability (new designs). For this reason, modern industry must be more and more competitive and it has to produce with acceptable costs. There is no doubt that combining the time variable and the quality variable is not easy because they frequently condition one another; the technological advances in the productive systems are going to permit that combination to be more efficient and feasible in a way that, for example, if it is observed the evolution of the systems and techniques of plastics injection, we arrive at the conclusion that, in fact, it takes less and less time to put a new product on the market and with higher levels of quality. The manufacturing technology of rapid tooling is, in this field, one of those technological advances that makes possible the improvements in the processes of designing and manufacturing injected parts. Rapid tooling techniques are basically composed of a collection of procedures that are going to allow us to obtain a mold of plastic parts, in small or medium series, in a short period of time and with acceptable accuracy levels. Their application is not only included in the field of making plastic injected pieces [1], [2] and [3], however, it is true that it is where they have developed more and where they find the highest output.
This paper is included within a wider research line where it attempts to study, define, analyze, test and propose, at an industrial level, the possibility of creating cores for injection molds starting from obtaining electroformed nickel shells, taking as an initial model a prototype made in a FDM rapid prototyping equipment.
It also would have to say beforehand that the electroforming technique is not something new because its applications in the industry are countless [3], but this research work has tried to investigate to what extent and under which parameters the use of this technique in the production of rapid molds is technically feasible. All made in an accurate and systematized way of use and proposing a working method.
2. Manufacturing process of an injection mold
The core is formed by a thin nickel shell that is obtained through the electroforming process, and that is filled with an epoxic resin with metallic charge during the integration in the core plate [4] This mold (Fig. 1) permits the direct manufacturing by injection of a type a multiple use specimen, as they are defined by the UNE-EN ISO 3167 standard. The purpose of this specimen is to determine the mechanical properties of a collection of materials representative industry, injected in these tools and its coMParison with the properties obtained by conventional tools.
Fig. 1.?Manufactured injection mold with electroformed core.
The stages to obtain a core [4], according to the methodology researched in this work, are the following:
(a) Design in CAD system of the desired object.
(b) Model manufacturing in a rapid prototyping equipment (FDM system). The material used will be an ABS plastic.
(c) Manufacturing of a nickel electroformed shell starting from the previous model that has been coated with a conductive paint beforehand (it must have electrical conductivity).
(d) Removal of the shell from the model.
(e) Production of the core by filling the back of the shell with epoxy resin resistant to high temperatures and with the refrigerating ducts made with copper tubes.
The injection mold had two cavities, one of them was the electroformed core and the other was directly machined in the moving platen. Thus, it was obtained, with the same tool and in the same process conditions, to inject simultaneously two specimens in cavities manufactured with different technologies.
3. Obtaining an electroformed shell: the equipment
Electrodeposition [5] and [6] is an electrochemical process in which a chemical change has its origin within an electrolyte when passing an electric current through it. The electrolytic bath is formed by metal salts with two submerged electrodes, an anode (nickel) and a cathode (model), through which it is made to pass an intensity coming from a DC current. When the current flows through the circuit, the metal ions present in the solution are transformed into atoms that are settled on the cathode creating a more or less uniform deposit layer.
The plating bath used in this work is formed by nickel sulfamate [7] and [8] at a concentration of 400?ml/l, nickel chloride (10?g/l), boric acid (50?g/l), Allbrite SLA (30?cc/l) and Allbrite 703 (2?cc/l). The selection of this composition is mainly due to the type of application we intend, that is to say, injection molds, even when the injection is made with fibreglass. Nickel sulfamate allows us to obtain an acceptable level of internal stresses in the shell (the tests gave results, for different process conditions, not superior to 50?MPa and for optimum conditions around 2?MPa). Nevertheless, such level of internal pressure is also a consequence of using as an additive Allbrite SLA, which is a stress reducer constituted by derivatives of toluenesulfonamide and by formaldehyde in aqueous solution. Such additive also favours the increase of the resistance of the shell when permitting a smaller grain. Allbrite 703 is an aqueous solution of biodegradable surface-acting agents that has been utilized to reduce the risk of pitting. Nickel chloride, in spite of being harmful for the internal stresses, is added to enhance the conductivity of the solution and to favour the uniformity in the metallic distribution in the cathode. The boric acid acts as a pH buffer.
The equipment used to manufacture the nickel shells tested has been as follows:
? Polypropylene tank: 600?mm?×?400?mm?×?500?mm in size.
? Three teflon resistors, each one with 800?W.
? Mechanical stirring system of the cathode.
? System for recirculation and filtration of the bath formed by a pump and a polypropylene filter.
? Charging rectifier. Maximum intensity in continuous 50?A and continuous current voltage between 0 and 16?V.
? Titanium basket with nickel anodes (Inco S-Rounds Electrolytic Nickel) with a purity of 99%.
? Gases aspiration system.
Once the bath has been defined, the operative parameters that have been altered for testing different conditions of the process have been the current density (between 1 and 22?A/dm2), the temperature (between 35 and 55?°C) and the pH, partially modifying the bath composition.
4. Obtained hardness
One of the most interesting conclusions obtained during the tests has been that the level of hardness of the different electroformed shells has remained at rather high and stable values. In Fig. 2, it can be observed the way in which for current density values between 2.5 and 22?A/dm2, the hardness values range from 540 and 580?HV, at pH 4?±?0.2 and with a temperature of 45?°C. If the pH of the bath is reduced at 3.5 and the temperature is 55?°C those values are above 520?HV and below 560?HV. This feature makes the tested bath different from other conventional ones composed by nickel sulfamate, allowing to operate with a wider range of values; nevertheless, such operativity will be limited depending on other factors, such as internal stress because its variability may condition the work at certain values of pH, current density or temperature. On the other hand, the hardness of a conventional sulfamate bath is between 200–250?HV, much lower than the one obtained in the tests. It is necessary to take into account that, for an injection mold, the hardness is acceptable starting from 300?HV. Among the most usual materials for injection molds it is possible to find steel for improvement (290?HV), steel for integral hardening (520–595?HV), casehardened steel (760–800?HV), etc., in such a way that it can be observed that the hardness levels of the nickel shells would be within the medium–high range of the materials for injection molds. The objection to the low ductility of the shell is compensated in such a way with the epoxy resin filling that would follow it because this is the one responsible for holding inwardly the pressure charges of the processes of plastics injection; this is the reason why it is necessary for the shell to have a thickness as homogeneous as possible (above a minimum value) and with absence of important failures such as pitting.
Fig. 2.?Hardness variation with current density. pH 4?±?0.2, T?=?45?°C.
5. Metallographic structure
In order to analyze the metallographic structure, the values of current density and temperature were mainly modified. The samples were analyzed in frontal section and in transversal section (perpendicular to the deposition). For achieving a convenient preparation, they were conveniently encapsulated in resin, polished and etched in different stages with a mixture of acetic acid and nitric acid. The etches are carried out at intervals of 15, 25, 40 and 50?s, after being polished again, in order to be observed afterwards in a metallographic microscope Olympus PME3-ADL 3.3×/10×.
Before going on to comment the photographs shown in this article, it is necessary to say that the models used to manufacture the shells were made in a FDM rapid prototyping machine where the molten plastic material (ABS), that later solidifies, is settled layer by layer. In each layer, the extruder die leaves a thread approximately 0.15?mm in diameter which is compacted horizontal and vertically with the thread settled inmediately after. Thus, in the surface it can be observed thin lines that indicate the roads followed by the head of the machine. These lines are going to act as a reference to indicate the reproducibility level of the nickel settled. The reproducibility of the model is going to be a fundamental element to evaluate a basic aspect of injection molds: the surface texture.
The tested series are indicated in Table 1.
Table 1.
Tested series
Series
pH
Temperature (°C)
Current density (A/dm2)
1
4.2?±?0.2
55
2.22
2
3.9?±?0.2
45
5.56
3
4.0?±?0.2
45
10.00
4
4.0?±?0.2
45
22.22
Fig. 3 illustrates the surface of a sample of the series after the first etch. It shows the roads originated by the FDM machine, that is to say that there is a good reproducibility. It cannot be still noticed the rounded grain structure. In Fig. 4, series 2, after a second etch, it can be observed a line of the road in a way less clear than in the previous case. In Fig. 5, series 3 and 2° etch it begins to appear the rounded grain structure although it is very difficult to check the roads at this time. Besides, the most darkened areas indicate the presence of pitting by inadequate conditions of process and bath composition.
Fig. 3.?Series 1 (×150), etch 1.
Fig. 4.?Series 2 (×300), etch 2.
Fig. 5.?Series 3 (×300), etch 2.
This behavior indicates that, working at a low current density and a high temperature, shells with a good reproducibility of the model and with a small grain size are obtained, that is, adequate for the required application.
If the analysis is carried out in a plane transversal to the deposition, it can be tested in all the samples and for all the conditions that the growth structure of the deposit is laminar (Fig. 6), what is very satisfactory to obtain a high mechanical resistance although at the expense of a low ductibility. This quality is due, above all, to the presence of the additives used because a nickel sulfamate bath without additives normally creates a fibrous and non-laminar structure [9]. The modification until a nearly null value of the wetting agent gave as a result that the laminar structure was maintained in any case, that matter demonstrated that the determinant for such structure was the stress reducer (Allbrite SLA). On the other hand, it was also tested that the laminar structure varies according to the thickness of the layer in terms of the current density.
Fig. 6.?Plane transversal of series 2 (×600), etch 2.
6. Internal stresses
One of the main characteristic that a shell should have for its application like an insert is to have a low level of internal stresses. Different tests at different bath temperatures and current densities were done and a measure system rested on cathode flexural tensiometer method was used. A steel testing control was used with a side fixed and the other free (160?mm length, 12.7?mm width and thickness 0.3?mm). Because the metallic deposition is only in one side the testing control has a mechanical strain (tensile or compressive stress) that allows to calculate the internal stresses. Stoney model [10] was applied and was supposed that nickel substratum thickness is enough small (3?μm) to influence, in an elastic point of view, to the strained steel part. In all the tested cases the most value of internal stress was under 50?MPa for extreme conditions and 2?MPa for optimal conditions, an acceptable value for the required application. The conclusion is that the electrolitic bath allows to work at different conditions and parameters without a significant variation of internal stresses.
7. Test of the injection mold
Tests have been carried out with various representative thermoplastic materials such as PP, PA, HDPE and PC, and it has been analysed the properties of the injected parts such as dimensions, weight, resistance, rigidity and ductility. Mechanical properties were tested by tensile destructive tests and analysis by photoelasticity. About 500 injections were carried out on this core, remaining under conditions of withstanding many more.
In general terms, important differences were not noticed between the behavior of the specimens obtained in the core and the ones from the machined cavity, for the set of the analysed materials. However in the analysis by photoelasticiy (Fig. 7) it was noticed a different tensional state between both types of specimens, basically due to differences in the heat transference and rigidity of the respective mold cavities. This difference explains the ductility variations more outstanding in the partially crystalline materials such as HDPE and PA 6.
Fig. 7.?Analysis by photoelasticity of injected specimens.
For the case of HDPE in all the analysed tested tubes it was noticed a lower ductility in the specimens obtained in the nickel core, quantified about 30%. In the case of PA 6 this value was around 50%.
8. Conclusions
After consecutive tests and in different conditions it has been checked that the nickel sulfamate bath, with the utilized additives has allowed to obtain nickel shells with some mechanical properties acceptable for the required application, injection molds, that is to say, good reproducibility, high level of hardness and good mechanical resistance in terms of the resultant laminar structure. The mechanical deficiencies of the nickel shell will be partially replaced by the epoxy resin that finishes shaping the core for the injection mold, allowing to inject medium series of plastic parts with acceptable quality levels.
References
[1] A.E.W. Rennie, C.E. Bocking and G.R. Bennet, Electroforming of rapid prototyping mandrels for electro discharge machining electrodes, J. Mater. Process. Technol. 110 (2001), pp. 186–196. [2] P.K.D.V. Yarlagadda, I.P. Ilyas and P. Chrstodoulou, Development of rapid tooling for sheet metal drawing using nickel electroforming and stereo lithography processes, J. Mater. Process. Technol. 111 (2001), pp. 286–294.
[3] J. Hart, A. Watson, Electroforming: A largely unrecognised but expanding vital industry, Interfinish 96, 14 World Congress, Birmingham, UK, 1996.
[4] M. Monzón et al., Aplicación del electroconformado en la fabricación rápida de moldes de inyección, Revista de Plásticos Modernos. 84 (2002), p. 557.
[5] L.F. Hamilton et al., Cálculos de Química Analítica, McGraw Hill (1989).
[6] E. Julve, Electrodeposición de metales, 2000 (E.J.S.).
[7] A. Watson, Nickel Sulphamate Solutions, Nickel Development Institute (1989).
[8] A. Watson, Additions to Sulphamate Nickel Solutions, Nickel Development Institute (1989).
[9] J. Dini, Electrodeposition Materials Science of Coating and Substrates, Noyes Publications (1993).
[10] J.W. Judy, Magnetic microactuators with polysilicon flexures, Masters Report, Department of EECS, University of California, Berkeley, 1994. (cap′. 3).
How Surface Treatments Keep Molds Operating Longer
Important tips and information about mold coatings to help you achieve the level of production that you and your customers desire.
By Steven . Bales Mold making technology January 2006
Abstract
There’s an awful lot to know these days about molding plastic and how to get the very best performance from the valuable tools you build or run. This guide has been written to provide important tips and information about mold coatings. After reading this, you should have a very good idea of what coatings—from the very traditional to the very latest—will help you to achieve the level of production you and your customers desire. After all, these tools are an investment and they need to be protected for the life of the products they mold.
Key Words
mold coatings preventive maintenance (PM) program benefit nickel Cobalt diamond-chrome
nickel-PTFE nickel-boron nitride electroless nickel texture
The Key Role of Coatings
Before introducing you to the wide range of coatings on the market today, it’s important to note the role coatings can play in an effective preventive maintenance (PM) program.
PM is really the key to protecting your tooling, your investment. Why? Because it saves time and money. Once you invest in a mold coating to improve tool performance, then a PM program is always a good idea to ensure you get the maximum benefit. These two steps should be a given in any shop.
Remember, no coating lasts forever, and producing substandard parts from a mold with a worn coating is no way to win customers and stay profitable. PM is probably the most cost-effective strategy you can put in place. The key is to educate your personnel on how mold coatings wear during production. Every coating is different, so it’s of benefit to have employees learn how to tell when the coating is showing deterioration, especially in high-wear areas such as gates and runners.
For example, wear in and around gate areas plated with hard chrome is the first sign that your mol