生活垃圾煤成型擠出機的設計含11張CAD圖
生活垃圾煤成型擠出機的設計含11張CAD圖,生活,糊口,垃圾,成型,擠出機,設計,11,十一,cad
一、畢業設計（論文）的內容
根據桂林某企業生活垃圾煤生產線中成型擠出機的成型要求，設計出一種可行的擠出機結構。分析動力要求，選擇原動機。進行擠出機結構的方案論證。繪制擠出機部件機構的裝配圖，進行有關理論分析和計算。繪制主要零件的零件圖。編制關鍵零件的加工工藝卡。完成部件的三維結構設計。
二、畢業設計（論文）的要求與數據
1. 根據垃圾煤的產品尺寸要求，針對某型號生產線中擠出機的設計參數為依據，作為擠出機的原始設計參數要求。計算原動機的功率參數。
2. 分析擠出機的工作原理，進行結構設計。
3. 擠出機繪制部件的裝配圖，進行有關理論分析和計算。
4. 編制關鍵零件的零件圖。
5. 建議用三維軟件完成部件的結構設計。
6. 編寫設計說明書，詳細說明設計思路和計算分析過程。
7. 完成4萬字符的英文資料翻譯。
三、畢業設計（論文）應完成的工作
1、完成二萬字左右的畢業設計說明書（論文）；在畢業設計說明書（論文）中必須包括詳細的300-500個單詞的英文摘要；
2、獨立完成與課題相關，不少于四萬字符的指定英文資料翻譯（附英文原文）；
3、繪制出破碎機部件的裝配圖和零件圖，折算A0圖紙3張以上。編制主要零件的加工工藝卡，進行必要的理論計算，給出計算結果。
四、應收集的資料及主要參考文獻
[1]. 孫桓, 陳作模. 機械原理[M]. 北京：高等教育出版社, 2001.
[2]. 徐灝. 機械設計手冊. 機械工業出版社, 1991.
[3]. 濮良貴, 紀名剛. 機械設計[M]. 北京：高等教育出版社, 2005
[4]. 楊叔子. 機械加工工藝師手冊[M]. 北京：機械工業出版社, 2002.
[5]. 吳宗澤. 機械設計實用手冊[M]. 北京：機械工業出版社, 2002.
[6]. 羅學科，謝富春主編. 數控原理與數控機床[M]. 化學工業出版社, 2004
[7]. 劉江; 唐傳軍; 張旦旦. 數控銑床立柱結構動態分析與優化[J]. 機械設計, 2010年09期,63-66
[8]. SolidWorks公司著. SolidWorks裝配體建模[M]. 北京：機械工業出版社, 2005.
[9]. 胡仁喜等. SolidWorks 2005機械設計及實例解析[M]. 北京：機械工業出版社, 2005.
[10]. Lee, J.H.; Wang, W.; Kweon, S.H.; Kim, Y.S.; Lee, Y.M.; Yang, S.H.. Structural design and optimization of a 3-axis miniaturized machine tool with high precision positioning stages [J]. Key Engineering Materials, v 339, p 321-326, 2007.
五、試驗、測試、試制加工所需主要儀器設備及條件
計算機一臺
CAD設計軟件（AutoCAD，CAXA，UG，Pro/E，Solidworks）等
任務下達時間：
2012年1月09日
畢業設計開始與完成時間：
2012年1月9日至 2012年 6 月03日
組織實施單位：
教研室主任意見：
簽字： 2011年12月30日
院領導小組意見：
簽字： 2012 年 1月 05日
1．畢業設計的主要內容、重點和難點等
主要內容：
1. 根據垃圾煤產品選擇合適的原動機；
2. 確定擠出機的結構方案，進行方案的論證；
3. 繪制裝配圖，設計關鍵零件的零件圖；
4. 利用三維CAD軟件設計出擠出機裝配結構部件的三維裝配結構；
5. 撰寫設計說明書，進行有關計算和說明；
6. 完成4萬字符的外文資料翻譯。
重點：
1. 確定擠出機機構的方案；
2. 繪制機構的裝配圖，給出相關的理論分析和計算說明。
難點：
1. 根據工作要求，剔除擠出機機構的合理方案，對方案進行優化和選擇；
2. 繪制擠出機機構的裝配圖和主要零件零件圖，用三維軟件完成部件的結構設計；
3. 機構的相關參數的選擇和計算；
2．準備情況（查閱過的文獻資料及調研情況、現有設備、實驗條件等）
文獻資料：
1. 孫桓, 陳作模. 機械原理[M]. 北京：高等教育出版社, 2001.
2. 徐灝. 機械設計手冊. 機械工業出版社, 1991.
3. 濮良貴, 紀名剛. 機械設計[M]. 北京：高等教育出版社, 2005
4. 楊叔子. 機械加工工藝師手冊[M]. 北京：機械工業出版社, 2002.
5. 吳宗澤. 機械設計實用手冊[M]. 北京：機械工業出版社, 2002.
6. 李波編著. 擠出機設計理論和計算[M]. 北京：中國建材工業出版社, 2010.10
7. 郭英. 螺桿擠壓機[M]. 紡織工業出版社, 1986
8. SolidWorks公司著. SolidWorks裝配體建模[M]. 北京：機械工業出版社, 2005.
9. 胡仁喜等. SolidWorks 2005機械設計及實例解析[M]. 北京：機械工業出版社, 2005.
10. Lee, J.H.; Wang, W.; Kweon, S.H.; Kim, Y.S.; Lee, Y.M.; Yang, S.H.. Structural design and optimization of a 3-axis miniaturized machine tool with high precision positioning stages [J]. Key Engineering Materials, v
現有設備：計算機一臺，UG，SolidWorks和CAXA等軟件。
3、實施方案、進度實施計劃及預期提交的畢業設計資料
實施方案：
1. 根據任務書，閱讀有關資料，進行調研，明確任務和設計思路；
2. 確定總體方案，根據原始設計參數，選擇原動機，分解總體方案，確定各個部分結構并選擇機構方案；
2. 繪制總體裝配圖和有關部件的裝配圖，利用三維軟件繪制三維裝配圖；3. 進行相關計算，理論分析，撰寫說明書。
進度實施計劃：
2012.3.1——2012.3.15 查閱資料，進行調研，完成開題報告；
2012.3.17 ——2012.3.25 翻譯英文資料；
2012.3.26——2012.4.1 確定總體方案，進行有關分析計算；
2012.4.2——2012.4.10 繪制擠出機的三維裝配圖和主要零件的零件圖；
2012.4.11——2012.4.26繪制二維的裝配圖和主要零件的零件圖；
2012.4.27——2012.5.10 運動參數及零件參數的相關計算
2012.5.12——2012.5.20修改完善，撰寫說明書，打印圖紙。
預期提交的畢業設計資料：
1． 機構裝配圖及零件圖；
2. 完整的設計說明書及英文資料翻譯。
指導教師意見
李文華同學根據畢業設計任務書給出的設計任務和要求，閱讀了相關文獻，進行了認真思考，做了相關準備，開題報告完整可行，同意開題。
指導教師（簽字）：
2012年2月 日
開題小組意見
開題小組組長（簽字）：
2012年 月 日
院（系、部）意見
主管院長（系、部主任）簽字：
2012年3月 日
生活垃圾煤成型擠出機的設計
摘 要
垃圾再生煤是一種新型綠色能源，它具有容易燃燒，火力猛，燃燒完全和排污少的特點。是一種很好的燃料。中國現在能源利用中，煤占有很大一部分比例。垃圾再生煤可以運用到居民日常生活，工業領域，運用前景廣泛。
本文根據垃圾煤生產線上對垃圾煤成型擠出機的工作要求，設計出一種可行的擠出機結構，主要工作包括：
進行擠出機的結構方案論證，設計可行擠出結構方案。繪制擠出機部件的機構裝配圖，主要零件的零件圖。進行有關理論分析和計算，以滿足強度和使用要求。
分析工作動力要求，選擇合適的原動機及減速機。
編制關鍵零件的加工工藝卡。對擠出機機中關鍵部位的零件編制加工工藝卡，可以了解其加工工藝過程，方便加工制造。用三圍軟件UG完成部件的結構設計。
本次擠出機采用了葉輪擠壓式原理，包含有減速箱的設計，擠出機頭的設計，箱體和機筒的設計。擠壓部采用螺旋結構，擠壓部螺旋軸采用懸臂式設計結構，機筒的結構采用組合式結構并內裝襯套減少物料對機筒摩擦。并在結構設計的基礎上進行重要零件的校核，確保其的可行性。
關鍵詞：擠出機；葉輪；機頭；三維建模
ABSTRACT
Regeneration of waste coal is a new type of green energy, it has easy burning, fire, and combustion characteristics of full and less emissions. Is a good fuel. Energy use in China now, coal accounts for a large proportion. Waste recycling coal use to the residents ' daily life, industrial areas, use Outlook extensively.
According to this article on waste coal briquetting waste coal production line extruders working requirements, design a feasible structure of extruder, major work includes:
Structural plan of the extruder, design feasible extrusion structure. Draw out the body assembly drawings of machine parts, parts of the main part. Theoretical analysis and calculation to meet strength and usage requirements.
Analysis of power requirements, select the right prime mover and gearbox.
Processing technology of preparation of key parts of the card. On key parts in extruder machine parts processing technology of preparation of cards, you can understand the process, facilitate the processing and manufacturing. Measurements software UG structure design of the finished part.
Impeller in the extruder adopts the principle of pressure-, containing the gearbox design, design of the extrusion die, tank and barrel design. Extrusion using spiral structure, extrusion screw design of axis-cantilever structure, structure using the modular structure and the contents of the cylinder lining reduces friction material on the barrel. And important parts on the basis of structural design of checking to ensure its feasibility
Keywords: extrusion machin；impelle；the nose；Three-dimensional modeling
目 錄
第1章 緒論 1
1.1垃圾再生煤的發展現狀 1
1.2垃圾再生煤發展中存在的問題 1
1.3垃圾煤成型擠出機的發展前景 1
1.4 畢業設計任務和要求 1
第2章垃圾煤成型擠出機的方案設計 2
2.1 工作原理 2
2.2 垃圾成型擠出機的方案選擇 2
2.3 方案確定 4
第3章 主要零部件的設計 5
3.1 螺旋葉輪的設計 5
3.1.1 工作特性分析與結構設計 5
3.1.2 參數設計 6
3.2 垃圾煤成型擠出機機頭的設計 8
3.3 機頭卡環的設計 10
3.4 支撐部分的設計 11
3.5各部分箱體的設計 12
3.5.1 支撐端箱體材料的選擇 12
3.5.2 軸承的潤滑和密封 14
3.5.3 葉輪軸筒的設計 15
3.5.4 葉輪軸筒體內襯套的設計 16
第4章 擠出機的動力系統選擇 17
4.1擠出機的電機選擇 17
4.2減速器的選擇 18
4.3聯軸器的選擇 18
第5章 擠出機的受力分析及校核 18
5.1 擠出機的受力分析 19
5.1.1 螺旋葉輪的受力分析 19
5.1.2 擠壓成型力的分析計算 19
5.1.3 主軸的力分析 20
5.2 強度校核 21
5.2.1 軸承強度校核 21
5.2.2 機頭卡環連接螺栓的強度校核 23
5.2.3 擠出機地腳螺栓的強度校核 24
5.2.4 葉輪強度的校核 25
第6章 主軸加工工藝文件的制定 26
6.1 零件的工藝分析 26
6.2 毛坯的選擇 26
6.3 工藝卡的制定 27
結論 27
致 謝 29
參考文獻 30
附錄 材料清單 31
Industrial Crops and Products
Volume 22, Issue 3, November 2005, Pages 207–222
Oil extraction of oleic sunflower seeds by twin screw extruder: influence of screw configuration and operating conditions
· I. Amalia Kartika,
· P.Y. Pontalier,
· L. Rigal
· Laboratoire de Chimie Agro-Industrielle, UMR 1010 INRA/INP-ENSIACET, 118 Route de Narbonne, 31077 Toulouse Cedex 4, France
· Received 8 October 2004. Accepted 6 January 2005. Available online 14 March 2005.
· http://dx.doi.org/10.1016/j.indcrop.2005.01.001, How to Cite or Link Using DOI
· Permissions & Reprints
Abstract
The objective of this study was to investigate the effects of screw configuration, position of screw elements and spacing between them allowing to realize oil extraction of oleic sunflower seeds on a twin-screw extruder. Experiments were conducted using a co-rotating twin-screw extruder (Model Clextral BC 45, France). Twelve screw profiles were examined to define the best performance (oil extraction yield, oil quality, mean residence time, and thermo-mechanical energy input) by studying the influence of operating conditions temperature pressing, screw rotation speed and seed input flow rate.
Generally, the position and spacing between two screw elements affected oil extraction yield. An increase of oil extraction yield was observed when the reversed screw elements were configured with increased spacing between elements or/and with smaller pitch screw. In addition, more oil extraction yield was produced as the temperature pressing, screw rotation speed and seed input flow rate were decreased. The higher oil extraction yield was obtained under operating conditions 80?°C, 60?rpm and 24?kg/h. Furthermore, the operating parameters influenced energy input and mean residence time of matter. Both energy input and mean residence time increased when the temperature pressing increased. However, increase of screw rotation speed and seed input flow rate decreased mean residence time. Effect of the operating parameters
on oil quality was unimportant. In all experiments tested, the oil quality was very good. The acid value was below 2?mg?KOH/g of oil and total phosphorus content was very poor, below 40?mg/kg.
Keywords
Twin-screw extruder;
Oleic sunflower;
Oil and extraction
1. Introduction
Industrial oil extraction from oleaginous seeds is commonly realized through mechanic pressing with a hydraulic or single expeller press, followed by solvent extraction. The hydraulic press is most effective but this process is discontinuous. Recently, the application of continuous oil extraction process using extrusion technology gets some attentions from few researchers ( [Vadke and Sosulski, 1988], [Isobe et al., 1992], [Clifford, 2000], [Wang and Johnson, 2001], [Crowe et al., 2001], [Singh et al., 2002]?and?[Zheng et al., 2003]). Extensive studies on extrusion processing of oilseeds using twin-screw extruder to generate oil ( [Guyomard, 1994], [Bouvier and Guyomard, 1997], [Dufaure et al., 1999a]?and?[Dufaure et al., 1999b]) and fatty acid ester (Lacaze et al., 1996) have been successfully carried out too.
The continuous oil extraction of oilseeds is widely carried out in a single-screw press. This type of machine consists of a single-screw of variable pitch and channel depth, slowly rotating in a cage type barrel (Isobe et al., 1992). Transport of material in a single-screw press depends mainly on friction between the material and the barrel's inner surface and screw surface during screw rotation. Thus, a solid core component is often necessary to produce the friction. This causes excess frictional heat, large energy consumption and oil deterioration. Furthermore, single-screw presses provide inadequate crushing and mixing if they are not configured with breaker bars or other special equipment. A twin-screw oil press can be expected to solve these problems because of the higher transportation force, similar to a gear pump, and better mixing and crushing at the twin-screw interface. In addition, energy consumption of the twin-screw press is more efficient ( [Isobe et al., 1992]?and?[Bouvier and Guyomard, 1997]).
The preparation of the raw material, such as size reduction, flaking, cooking and moisture preconditioning of the seeds are necessary to improve single-screw press performance, as well as the mechanical design of the worm and barrel assembly. Maximum pressure increased, and press throughput and residual oil (RO) in presscake decreased, with a reduction in choke opening and with lowering shaft speed of the single-screw press (Vadke and Sosulski, 1988). In addition, when whole seeds or flakes were preheated in the range 40–100?°C, the pressure and press throughput increased and RO decreased. Press throughput and oil output both achieved maximal at canola seed moisture content of 5%, while the RO showed a continuous increase with increasing seed moisture content. Oil recovery of crambe seed extraction on a single-screw press and sediment content increased, and residual oil and pressing rate decreased as seed moisture content decreased (Singh et al., 2002). In the case of flaxseed, oil recovery increased as whole seed moisture content increased (Zheng et al., 2003).
Twin-screw extruder played an important role in the food industry to transformer the material physically and chemically in a single step. The main application of twin-screw extruder is widely found in the production of various products such as snacks, cereals and pet food. In the present day, several studies have expanded the utility of twin-screw extruder as a reactor to conduct a thermo-mechano-chemical action plus a liquid/solid extraction, as in hemicellulose extraction ( [N’Diaye et al., 1996]?and?[N’Diaye and Rigal, 2000]), in a continuous mode.
The great capability of twin-screw extruder to conduct diverse functions and processes has a good correlation with advantages of their characteristics. According to Dziezak (1989), those advantages include (i) ability to provide better process control and versatility, especially in pumping efficiency, controlling residence time distribution and uniformity of processing, (ii) ability to process specialty formulation, in which the single-screw extruder can not handle it and (iii) flexibility to design machine, which permits self-cleaning mechanisms and rapid changeover of crew configuration without disassembling the extruder.
Twin-screw extruder is mainly built by elements, namely screw, including (i) forward pitch screw, principally conducts a conveying action, (ii) monolobe paddle (DM), primarily exerts a radial compression and shearing action, (iii) bilobe paddle (BB), exerts a significant mixing and shearing actions, a conveying and axial compression actions in combination with forward pitch screw, and (iv) reversed pitch screw, carries out intensive shearing and considerable mixing, and exerts a strong axial compression in combination with forward pitch screw (Rigal, 1996). The arrangement of different characteristics of screw elements (pitch, stagger angle, length) in different positions and spacing determine screw profile/configuration that is main factor influencing performance (product transformation, residence time distribution, mechanical energy input) during extrusion processing ( [Gogoi et al., 1996a], [Choudhury et al., 1998], [Gautam and Choudhury, 1999a]?and?[Gautam and Choudhury, 1999b]). Furthermore, by modularity of its configuration and screw profile, the twin-screw extruder enables a large number of basic operations, such as material transport, grinding/crushing, mixing, chemical reaction, liquid–solid extraction, liquid–solid separation and drying, to be carried out in a single step (Rigal, 1996) in which the conventional presses can not handle it.
The great amounts of researches concerning on study of screw configuration are found in the agro-industry field, particularly, for starch transformation. Screw configuration by placing longer reversed screw element (Barres et al., 1990) or nearer from the die (Colonna et al., 1983) increased starch breakdown. Furthermore, the systematic increases in starch breakdown ( [Gautam and Choudhury, 1999a]?and?[Gautam and Choudhury, 1999b]) and in mechanical energy input and water solubility index (Choudhury and Gautam, 1998) were observed as the mixing elements were moved farther away from the die, with longer elements, and with increased spacing between elements. The incorporations of reversed screw element (Gogoi et al., 1996b), kneading element (Choudhury et al., 1998) and mixing elements combination (Gogoi et al., 1996a) increased specific mechanical energy, expansion ratio and water solubility index.
In oil extraction case, a significant increase in oleic sunflower oil yield was observed as the length and the pitch of reversed screw elements were increased and reduced, respectively (Dufaure et al., 1999a). In addition, oil yield could be improved with adding the monolobe paddle screws (DM) in module 5 just above the filtration module and with increasing the stagger angle of bilobe paddle screws (BB). Furthermore, a investigation of continuous oil extraction method using extruder divided into two zones, (i) twin-screw zone, which was built from two co-rotating and co-penetrating screws and (ii) double single-screw zone, which was constructed from two co-rotating single-screw, increased oil extraction yield of whole sunflower seeds up to 90% with residual oil content in cake meal lower than 15% (Bouvier and Guyomard, 1997).
As well as screw configuration, the preparation of the raw material is also important to enhance oil extraction. The oil extraction yield from whole sunflower seeds in a contra-rotating twin-screw press was low (75%), but could be increased to 93.6% if raw materials was dehulled (Isobe et al., 1992). In the case of colza seeds, the oil extraction yield from dehulled seeds was always lower than whole seeds (Bouvier and Guyomard, 1997). The oil yield increased up to 80% with a high temperature pressing and natural moisture content of oleic sunflower seeds (Dufaure et al., 1999a).
In relation to these results, the studies more systematic should be realized to improve oil extraction yield and to reduce residual oil content in cake meal. Moreover, it has to optimize operating conditions and characterize oil extraction quality, residence time distribution and mechanical energy input.
This study purposed to evaluate the effects of screw configuration and operating parameters such as temperature pressing, screw rotation speed and seed input flow rate on oil extraction of oleic sunflower seeds using twin-screw extruder. The characterization of extraction performance was observed by the determinations of extraction yield, oil quality, mean residence time and thermo-mechanical energy input.
2. Materials and methods
2.1. Materials
All trials were carried out with whole and uncleaned sunflower seeds (3–6% of impurities content), which were supplied by La Toulousaine de Cereales (France). These seeds were from oleic type with the average acidity of 0.95%. All solvent and chemicals were analytical grades that were obtained from Sigma–Aldrich, Fluka, Prolabo and ICS, France.
The oil content of seed used in the first set of tests (screw configuration study), expressed in relation to the dry matter content of uncleaned seed, was 44.74% (NF V03-908). The seed moisture content at storage was 8.27% (NF V03-903).
In the second set of tests (operating conditions study), the oil content of uncleaned oleic sunflower seed was 42.49% in relation to the dry matter. The seed moisture content at storage was 7.13%.
The seeds were neither dehulled nor flaked prior to entering twin-screw extruder. Dehulling of oilseeds is adapted to the quality of the hulls and how easily they can be removed. Generally, European factories do not hull sunflower seeds. The hull by itself constitutes nearly 25% of the seed ( [Isobe et al., 1992]?and?[Karleskind, 1996]). Flaking of seeds is extremely important as a solid-liquid extraction by solvent is conceived after mechanic pressing. In this study, the oil extraction was only carried out with mechanic pressing, without solvent extraction.
2.2. Twin-screw extruder
Experiments were conducted with a co-rotating twin-screw extruder (Model Clextral BC 45, France). The extruder was built with seven modular barrels, each 200?mm in length, and different twin-screws which had segmental screw element each 50 and 100?mm in length. Four modules were heated by thermal induction and cooled by water circulation. Material was fed into the extruder inlet port by a volumic screw feeder (type 40, Clextral, France). A filter section consisting of six hemispherical dishes with perforation of 1?mm in diameter was outfitted on module 5 to separate extracted oil. Furthermore, screw rotation speed, seed input flow rate and barrel temperatures were monitored from a control panel. Fig. 1 shows the schematic modular barrel of twin-screw extruder.
Fig. 1.?Schematic modular barrel and global screw configuration of twin-screw extruder BC 45.
View thumbnail images
2.3. Experimental
2.3.1. Screw configuration study
Thirteen screw configurations were evaluated in this experiment (Fig. 2). First configuration was the best configuration obtained in previous work (Dufaure et al., 1999a). Seven screw configurations (profiles 1–7) were built by placing monolobe paddles (DM) and bilobe paddles (BB) elements at different position. Bilobe paddles (BB) were located at 50 and 150?mm from the right side module 5 (filter module). Monolobe paddles (DM) were positioned by spacing 50 or 100?mm from BB. Furthermore, position and interval effects of two reversed screw (CF) elements were studied by placing a CF element at 50 and 100?mm from the left side module 5 and by spacing second CF element at 0, 50, 100 or 150?mm from first CF element. Another five configurations (profiles 8–12) were developed from profile 5 by modifying the position of DM elements and/or by reducing the pitch of reversed screw elements. DM elements were positioned at module 2 before BB elements and the pitch of CF elements were decreased from 25 to 15.
Fig. 2.?Screw configurations for oil extraction of oleic sunflower seeds.
View thumbnail images
For all profiles, barrel temperature, screw rotation speed and seed input flow rate were fixed at 80?°C, 60?rpm and 24?kg/h, respectively. In the case of profiles 8, 11 and 12, screw rotation speed was fixed at 100 and 70?rpm. To ensure a stable flow rate and temperature, the extruder was operated for approximately 20–25?min before processing the actual samples. Upon achieving steady operation, filtrate (oil containing the foot) and cake meal samples were immediately collected over a period of 20?min. Sample collection time was determined with a stopwatch. The filtrate and cake meal were weighed. The filtrate was further centrifuged to separate the foot from the oil. The moisture and residual oil contents of the cake meal were measured according to standards NF V03-903 and NF V03-908. For each tests, sample collection was carried out just the once. The calculation of oil extraction yield was determined by relationships following:
(1)
(2)
where Qs is the inlet flow rate of seed (kg/h), QF and Qc are respectively the outlet flow rate of the filtrate (kg/h) and the cake meal (kg/h). Ts, TF and Tc are the oil content of the seed (%), the filtrate (%) and the cake meal (%), respectively.
In some cases, a dead stop procedure allowed us to collect material at different locations (mainly on modules 1–4) in screw channel for particle size distribution analysis. A number of materials (±50?g) taken from screw channel were successively filtered on 3, 2, 1 and 0.5?mm opening sieves to separate all particles. All fractions were weighed for measurement of the particle size distribution.
2.3.2. Operating conditions study
Experiments were done in three steps and conducted with screw profile 5. First, experiment was conducted at various temperatures (80–120?°C) with a fixed screw rotation speed of 60?rpm and a seed input flow rate of 24?kg/h. The choice of these temperature limits were based on information reported in the literature (Dufaure et al., 1999a). Furthermore, a number of feed input flow rates (17–49?kg/h) and screw rotation speeds (60–200?rpm) were tested to determine the optimal operating condition. In this case, the temperature along the barrel was fixed at 80?°C. Sample collections and analysis were determined according to procedure in previous study.
2.4. Oil quality analysis
The quality parameters of a crude oil included (i) the acid value, expressed in mg of KOH/g of oil (standard NF T 60-204), indicates the free fatty acid content of the oil; (ii) the iodine value, expressed in terms of the number of centigrams of iodine absorbed per gram of oil (standard AOCS-Cd 1d-92), is a measure of the unsaturation of oils. The higher the iodine value the greater the unsaturation of oils; (iii) the saponification value, expressed in mg of KOH/g of oil (standard ISO 3657), is the amount of alkali necessary to saponify a definite quantity of the oil; (iv) the phosphorus content, expressed in mg of phosphorus per kg of oil (standard AOCS Ca 12-55), determines phosphorus or the equivalent phosphatide content by ashing the oil in the presence of zinc oxide followed by the spectrophotometric measurement of phosphorus as a blue phosphomolybdic acid complex. Total phospholipids content was determined by multiplying phosphorus content by 30. Moreover, the fatty acids and tocopherols compositions of crude oil were determined with gas chromatography (FAME method) and HPLC (IUPAC 2, 432 COFRAC CM 40), respectively.
2.5. Specific mechanical energy
The specific mechanical energy (SME) was calculated by the following equation:
(3)
(4)
where P is the motor power, I and Ss are correspondingly electrical intensity and screw rotation speed.
2.6. Residence time distribution
The residence time distribution (RTD) was determined by introducing directly a certain amount of seeds (±5?g) colored with erythrosine into the entrance of the extruder. Samples (filtrate and cake meal) were collected every 10?s. The cake meal samples were dried (105?°C, 24?h) and ground in a micro-grinder. Furthermore, the quantity of colorant in samples was determined by CIE L*a*b* method using a spectrocolorimeter (Minolta Seri CM-500i, Japan). The color values measured are presented as L*, a* and corresponding to lightness, the green-red and the blue-yellow components, respectively. Those results are the average of five consecutive measurements.
3. Results and discussion
3.1. Effect of screw configuration
3.1.1. Oil extraction yield
The position of BB, DM and CF elements and the spacing between two elements affected generally the oil extraction yield R and Ro (Fig. 3). High oil extraction yield based on residual oil content of cake meal (R) was observed when first reversed screw element was moved farther from second reversed screw, as observed on profiles 3, 5, 8 and 11, compared to profiles 0, 7 and 9 where no spacing between reversed screw elements. For certain interval of two CF elements, oil extraction yield increased with decreasing interval between BB and DM elements, as observed on profiles 2 and 5. In another cases, the reduction of the interval of BB and DM elements decreased the oil yield (profiles 1 and 4, 3 and 6). The modifications of the configuration of BB and DM elements or/and the pitch of screw elements did not influence the oil yield (profiles 8 and 11), in contrary the oil extraction yield decreased (profiles 5 and 10).
Fig. 3.?Variation of oil extraction yield on different screw configurations.
View thumbnail images
In the case of Ro, high oil yield separated from filtrate by centrifugation was mainly observed when interval between BB
收藏