【溫馨提示】 dwg后綴的文件為CAD圖，可編輯，無水印，高清圖，壓縮包內文檔可直接點開預覽，需要原稿請自助充值下載，請見壓縮包內的文件及預覽，所見才能所得，請細心查看有疑問可以咨詢QQ：414951605或1304139763
畢業論文（設計）任務書
題 目 CA6140車床831007撥叉零件數控加工工藝及工裝設計
學生姓名
盧曉志
所學專業
機電技術教育
班級
042班
指導教師姓名
杜家熙
所學專業
機械制造
職稱
副教授
完成期限
2008年12月22日 至 2009年5月31日
一、 論文（設計）主要內容及主要技術指標
1.主要內容
1）數控加工工藝概述；
2）數控加工工藝路線的步驟；
3）撥叉零件數控工藝分析；
4）撥叉零件數控工藝路線確定；
5) 撥叉零件數控加工的工裝設計。
2.技術指標
1) 數控工藝的技術指標；
2）零件的數控工藝分析，確定毛坯制造方法及形狀。
3）撥叉零件數控工藝規程、工藝路線設計。
4）確定切削用量和其本工時。
5）合理刀具參數和準確對刀和檢驗。
二、畢業論文（設計）的基本要求
1.畢業設計（論文）一份：有400字左右的中英文摘要，正文后有10篇左右的參考文獻，正文中要引用5篇以上文獻，并注明文獻出處。論文字?jǐn)?shù)在6000字以上；
2.有不少于2000漢字的與本課題有關的外文翻譯資料；
3.畢業設計總字?jǐn)?shù)在10000字以上；
三、畢業論文（設計）進度安排
1.2008年12月12日-12月16日，下達畢業設計任務書；寒假期間完成外文資料翻譯和開題報告。
2. 2098年2月25-3月9日（第1-2周），指導教師審核開題報告和設計方案。
4. 2009年3月10日-5月4日（第3-10周），畢業設計單元部分設計。
5. 2009年5月5-5月11日（第11周），畢業設計中期檢查。
6. 2009年5月12日-6月1日（第12-14周），撥叉零件數控加工工藝及工裝設計，
整理、撰寫畢業設計報告。
8. 2009年6月2日-15日（第15-16周），上交畢業論文，指導、評閱教師審查評閱論文，畢業設計答辯資格審查。畢業設計答辯，學生修改整理設計論文。
Production Automation
1.1.1 Automation Concepts
Automation may be defined as a system that is relatively safe-operating .Such a system includes complex mechanical and electronic devices and computer-based system that the place of observation,effort,and decision by a human operator. It is a system that exhibits properties of human being by following predetermined operations or responding to encoded instructions.
1.1.2 Computer process control
Process control involves the control of variables in a manufacturing process, where one or any combination of materials and equipment produces or modifies a product to make it more useful and hence more valuable. In process control controls continuous operations. Two kinds of control systems are the open loop and the closed loop.In an open-loop control system, the computer dose not itself automate the process .That is ,there is no self-correction.The process remains under the direct control of human operators,who read form various sources of information such as instruments, set calibrated dials for process regulation, and change the controlling medium.
Closed-loop control systems use computers to automate the process. He computer is directly in charge of the process. It sdjusts all controls form the information provided by sensing devices in the system to keep the process to the desired specifications, a technique that uses a feedback mechanism . Feedback is the action of measuring the difference between the actual result and the desired result and using that difference to drive the actual result toward the desired result. The term feedback comes forms from a measured sample of the output of the process (production) function that becomes the input of the control function . That is ,the output of the control function ,meeting special designed requirements is the input to the control system . Thus ,the signal begins at the output of the controlled production function and end at the input to the production.
Typical functions of process control systems are moonitoring ,data logging, quality control, maximizing profit for a given out put, supervisory control , and factory information systems (FIS). Benefits of computer process control system are increased productivity , improved product quality ,
and enhanced efficiency , safety , comfort ,and convenience.
1.1.3 Management Information Systems (MIS)
Management information systems are designed to aid in the performance of management functions.These systems are generated by computer systems and are developed to provide executives with up-to-the-minute information about the operations of the enterprise.When required, information systems are used to aid management in the decision-making functions of the enterprise . Viewing CIM (Computer Integrated Manufacturing) as an informations system for the enterprise for decision-making , CAPACS must be informations interconnected . As a result , there are many software packages associated with the CAPACS in Fig . 1 . 2 . Typical of there are CAPP , DCS , FIS and CAD .
The concept of an MIS is a design objective , its goal being to get the correct information to the appropriate manager at the right time . As a result , MIS implementation varies considerably among manufacturing enterprises because of each organization's function , type of production , informations resources available , and organizational commitment to MIS .
1.1.4 Engineering
Computer are used extensively in most engineering functions . Engineering is a profession in which a knowledge of the natural sciences is applied with judgment to develop ways of using the materials and forces of nature . Typical engineering functions using CAPACS are design , process planning , analysis and optimization , synthesis , evaluation and documentation , simulation , modeling , and quality control planning . Using CAPACS in engineering increases the productivity of engineers and improves the quality of designs .
For example ,the application of computers to an engineering design process is performed by a CAD system Engineers can design and thoroughly test concepts quickly and simply from one workstation . Computers permit engineers to take a concept from its original design through testing to numerical control (NC) output , or a combination of steps in between . They perform complex scientific and engineering computations rapidly with high accuracy , calculate physical properties before actual parts are made and provide a fast , easy method to create models of even the most complex parts .
The computer has influenced the way products are designed , documented and released for production . As technology develops , engineering operations are becomeing more and more automated and are relieving the engineer of many tedious manual calculations .
1.1.5 Production
Applications of computers to the production process encompass such functions as computer monitoring , supervisory computer control , direct digital control ( DDC) , material handing , product fabrication , assembly and test/inspection operations . New ideas and technology developments are gaining acceptance on the factory floor . More important , the integration of more computers into the production process increases automation on the factory floor .
Computer automation helps to organize , access , and provide vital information in a common date base system for use by all manufacturing operations . Computer automation helps to control and to schedule machines and process , and to control raw materials and parts . A computer automated system concept is shown in FIG . 1 . 3 . Each function in manufacturing has its own area controller under the control of a host computer in order to share information with other operations .
生產自動化
1.1.1自動化概念
自動化可以被定義為一個操作比較安全的系統。這個系統，包括復雜的機電設備和由一個人為操作員觀察、嘗試并決定其方位的電腦系統。它是一個按照事先確定的操作或應對編碼指示來展現人的性能的系統。
1.1.2計算機過程控制?????
過程控制涉及到生產過程中的控制變量，在此生產過程中，一種或任意一種材料和設備聯合生產或修改產品，使其更加有用，因此更有價值。過程控制控制不間斷運行?？刂葡到y(tǒng)有兩種，即開環控制系統和閉環控制系統。在一個開環控制系統中，計算機本身不會使過程自動化。也就是說，沒有自我更正.這個過程仍然直接受控于人為操作員，他閱讀各種信息來源，如工具，建立校準盤的過程監管，來改變控制的媒介。
閉環控制系統，使用計算機來實現過程自動化。電腦直接負責其過程。它根據傳感裝置所提供的信息對所有控制適時調整，以保持這一過程所需的規格及使用一個反饋機制的技術。反饋是衡量實際結果與期望的結果之間差異的行為，利用這種差異，以推動實際結果向所期望的結果的進展。期限反饋根據過程（生產）功能輸出的測量樣本而形成格式，進而轉為控制功能的輸入。也就是說，控制功能的輸出，如果滿足了特殊設計的要求即可轉變成控制功能的輸入。因此，信號始于控制生產功能輸出之時并結束于生產功能輸入之時。
過程控制系統的典型功能是操作，記錄數據，控制質量，為某一輸出，監控，和工廠信息系統（電）提供最大限度的好處 。計算機過程控制系統的優點在于能夠提高生產率，改進產品質量和提高效率，且安全，舒適和方便。
1.1.3 管理信息系統（ MIS ）
?????管理信息系統用來為管理功能的實施提供幫助。這些系統由計算機系統產生，并被用來為管理人員提供有關企業運作的最新信息。我們可用信息系統來幫助企業制定決策。例如，可把計算機集成制造（計算機集成制造）作為一個信息系統，為企業決策， CAPACS必須是相互關聯的信息。其結果是，有許多與CAPACS的圖1.2 相關的軟件包。典型的有 CAPP系統，集散控制系統，模糊推理系統和計算機輔助設計。
? 管理信息系統的概念是一個設計目標，其目的是在合適的時間，得到正確的信息并給適當?shù)慕?jīng)理。因此，制造企業之間各組織的功能，生產類型，信息資源及組織對 MIS的承諾，會造成系管理信息系統的實施不盡相同。
1.1.4工程?????
電腦被廣泛應用在工程領域。工程學是一門職業，在這門職業中，我們可通過所獲取的自然科學知識加判斷識別力來形成使用材料和自然力量的方法。使用CAPACS的典型工程功能是設計，工藝規劃，分析和優化，合成，評價和記錄，仿真，建模，和質量控制規劃。工程使用CAPACS可以增加工程師的生產并提高設計質量。
?? 例如，工程的設計過程使用計算機是由CAD系統的工程師負責的，他們能夠迅速而簡單地設計出來自工作站的方案并對其進行徹底檢驗。計算機允許工程師通過測試數字控制（數控）輸出，或者兩者之間的步驟，采用原來的設計方案。他們能迅速而精度地進行復雜的科學和工程計算，能在實際零部件被生產數之前計算出物理性能，并提供了一個快速，簡單的方法，用于建立模型，即使是最復雜的部分。
計算機已經影響了產品設計，記錄和發布生產的方式。隨著技術的發展，工程業務也在廣泛采用自動化，給工程師減少了許多繁瑣的人工計算。
1 .1.5 生產?
?計算機應用于生產過程有以下功能，包括監測計算機，監督計算機控制，直接數字控制（ DDC） ，材料處理，產品制造，組裝和測試/檢查行動。工廠車間也正在接受新的觀念和技術的發展。更重要的是，伴隨著更多的計算機被用到生產過程，工廠車間自動化程度加深了。
?????計算機自動化協助組織，存取，并提供資料庫中的重要信息，供所有的制造業務。計算機自動化控制，并幫助安排機器和過程，同時還可控制原材料和零部件。計算機自動化系統的概念圖.1.3.所示，在制造業領域，每種功能都會在主機電腦的控制之下行使自己的控制范圍，這樣方便了與其他操作共享信息。
河南科技學院
2009屆本科畢業論文（設計）
外文資料
學生姓名：盧曉志
所在院系：機電學院
所學專業：機電技術教育
導師姓名：杜家熙
完成時間：2009年2月27日
Production Automation
1.1.1 Automation Concepts
Automation may be defined as a system that is relatively safe-operating .Such a system includes complex mechanical and electronic devices and computer-based system that the place of observation,effort,and decision by a human operator. It is a system that exhibits properties of human being by following predetermined operations or responding to encoded instructions.
1.1.2 Computer process control
Process control involves the control of variables in a manufacturing process, where one or any combination of materials and equipment produces or modifies a product to make it more useful and hence more valuable. In process control controls continuous operations. Two kinds of control systems are the open loop and the closed loop.In an open-loop control system, the computer dose not itself automate the process .That is ,there is no self-correction.The process remains under the direct control of human operators,who read form various sources of information such as instruments, set calibrated dials for process regulation, and change the controlling medium.
Closed-loop control systems use computers to automate the process. He computer is directly in charge of the process. It sdjusts all controls form the information provided by sensing devices in the system to keep the process to the desired specifications, a technique that uses a feedback mechanism . Feedback is the action of measuring the difference between the actual result and the desired result and using that difference to drive the actual result toward the desired result. The term feedback comes forms from a measured sample of the output of the process (production) function that becomes the input of the control function . That is ,the output of the control function ,meeting special designed requirements is the input to the control system . Thus ,the signal begins at the output of the controlled production function and end at the input to the production.
Typical functions of process control systems are moonitoring ,data logging, quality control, maximizing profit for a given out put, supervisory control , and factory information systems (FIS). Benefits of computer process control system are increased productivity , improved product quality ,
and enhanced efficiency , safety , comfort ,and convenience.
1.1.3 Management Information Systems (MIS)
Management information systems are designed to aid in the performance of management functions.These systems are generated by computer systems and are developed to provide executives with up-to-the-minute information about the operations of the enterprise.When required, information systems are used to aid management in the decision-making functions of the enterprise . Viewing CIM (Computer Integrated Manufacturing) as an informations system for the enterprise for decision-making , CAPACS must be informations interconnected . As a result , there are many software packages associated with the CAPACS in Fig . 1 . 2 . Typical of there are CAPP , DCS , FIS and CAD .
The concept of an MIS is a design objective , its goal being to get the correct information to the appropriate manager at the right time . As a result , MIS implementation varies considerably among manufacturing enterprises because of each organization's function , type of production , informations resources available , and organizational commitment to MIS .
1.1.4 Engineering
Computer are used extensively in most engineering functions . Engineering is a profession in which a knowledge of the natural sciences is applied with judgment to develop ways of using the materials and forces of nature . Typical engineering functions using CAPACS are design , process planning , analysis and optimization , synthesis , evaluation and documentation , simulation , modeling , and quality control planning . Using CAPACS in engineering increases the productivity of engineers and improves the quality of designs .
For example ,the application of computers to an engineering design process is performed by a CAD system Engineers can design and thoroughly test concepts quickly and simply from one workstation . Computers permit engineers to take a concept from its original design through testing to numerical control (NC) output , or a combination of steps in between . They perform complex scientific and engineering computations rapidly with high accuracy , calculate physical properties before actual parts are made and provide a fast , easy method to create models of even the most complex parts .
The computer has influenced the way products are designed , documented and released for production . As technology develops , engineering operations are becomeing more and more automated and are relieving the engineer of many tedious manual calculations .
1.1.5 Production
Applications of computers to the production process encompass such functions as computer monitoring , supervisory computer control , direct digital control ( DDC) , material handing , product fabrication , assembly and test/inspection operations . New ideas and technology developments are gaining acceptance on the factory floor . More important , the integration of more computers into the production process increases automation on the factory floor .
Computer automation helps to organize , access , and provide vital information in a common date base system for use by all manufacturing operations . Computer automation helps to control and to schedule machines and process , and to control raw materials and parts . A computer automated system concept is shown in FIG . 1 . 3 . Each function in manufacturing has its own area controller under the control of a host computer in order to share information with other operations .
5
河南科技學院
2009屆本科畢業論文（設計）
論文題目：CA6140車床831007撥叉零件
數控加工工藝及工裝設計
學生姓名： 盧曉志
所在院系： 機電學院
所學專業： 機電技術教育
導師姓名： 杜家熙
完成時間：2009年5月20日
畢業論文（設計）開題報告
題目名稱 CA6140車床831007 撥叉零件數控加工工藝及工裝設計
學生姓名
盧曉志
專業
機電技術教育
班級
042班
指導教師姓名
杜家熙
專業
機械制造
職稱
副教授
完成期限
2009年2月16日至2009年2月27日
一、選題的目的意義
隨著我國現代制造技術的發展，數控機床的普及和從事數控加工人員的增多，數控加工越來越受到人們的重視。撥叉是一種重要輔助零件，廣泛應用于我們的日常生活及生產當中，在機械行業有著越來越重要的作用，撥叉零件的制造精度能不能夠滿足加工技術要求；如何更大限度的降低機加工的基本勞動時間及提高單位時間內的生產率，都成為機械行業勢待解決的技術性問題。隨著數控技術的不斷發展成熟及數控技術應用的不斷廣泛化、深入化、大眾化，我們意識到，采用數控機床來加工撥叉零件既能夠提高零件的精度又能夠完成采用普通機床加工時應運受限的瓶頸，對提高加工效率、以及降低勞動強度都有不可估量之好處。
二、國內外研究現狀
隨著計算機科學、信息技術的迅速發展，傳統的制造業已發生了十分顯著的變化，發達國家正進行由傳統的制造技術向現代制造技術的轉變，并提出了全新的制造模式。數控加工技術將逐步引航現代機械制造業的發展。數控機床的應用范圍日益擴大，其產生的經濟效益與社會效益十分明顯。尤其是數控加工不斷朝高速、精密方向的發展，提高數控機床的應用范圍對于提高制造企業的競爭力有著重要的意義。
對傳統零件的數控加工技術也得到越來越廣泛的應用。面對新技術、新工藝的不斷出現，提高數控加工技術在傳統撥叉類零件的應用也受到越來越多的重視。如何使數控技術在加工這一類零件中表現出其高質量、高精度、高效率，都成為各國爭先要解決的問題。因此研究它對我國的制造行業很有借鑒作用。
三、主要研究?jī)?nèi)容
1) 數控加工工藝的特點及說明；
2) 數控加工的一般步驟；
3) 撥叉零件數控加工工藝原理及特點；
4) 撥叉在數控加工中的應用及其優越性；
5) 通過撥叉零件的工裝設計來體現數控加工的重要作用；
四、畢業論文（設計）的研究方法或技術路線
1. 根據設計內容查閱相關期刊資料；
2. 利用網絡查找相關資料進行修改整理；
3. 對實際生產中撥叉零件沒的應用進行統計總結；
4. 論文總結。
五、參考文獻與資料
[1] 趙家奇. 機械制造工藝學課程設計指導書(2版). 北京：機械工業出版社,2006.
[2] 曾志新,呂明. 機械制造技術基礎. 武漢：武漢理工大學出版社,2001.
[3] 李益明. 機械制造工藝設計簡明手冊. 北京：機械工業出版社,1993.
[4] 肖詩綱. 切削用量手冊. 北京：機械工業出版社,1993.
[5] 金屬切削機床夾具設計手冊. 上海柴油機廠工藝設備研究所編. 北京：機械工業出版社，1987.
[6] 李旦，邵東向，王杰等. 機床專用夾具圖冊. 哈爾濱：哈爾濱工業大學出版社（2版），2005.
[7] 羅良玲，劉旭波. 數控技術及應用. 北京：清華大學出版社，2005.
[8] 邏輯. 數控工藝及刀具. 重慶：重慶大學出版社，2006.
[9] 劉武發，劉德平. 機床數控技術. 北京：化學工業出版社，2007.
[10] 劉萬菊. 數控加工工藝及編程. 北京：機械工業出版社，2007.
[11] 余英良. 數控工藝與編程技術. 北京：化學工業出版社，2007.
[12] 楊建明. 數控加工工藝與編程. 北京：北京理工大學出版社，2006.
[13] 賀曙新，張思第，文少波. 數控加工工藝. 北京：北京工業出版社，2005.
[14] 聶秋根，陳光明. 數控加工實用技術. 北京：電子工業出版社，2007.
[15] 唐應謙. 數控加工工藝學. 北京：中國勞動保障出版社，2000.
[16] 胡志剛. 計算機輔助繪圖. 北京：高等教育出版社，1999.
[17]趙家奇編,機械制造工藝學課程設計指導書2版.北京:機械工業出版社,2000.10.
[18]李云主編,機械制造及設備指導手冊.-- 北京:機械工業出版社,1997.8
[19]孟少農主編,機械加工工藝手冊.---2---北京:機械工業出版社,1991.9.
[20]徐圣群主編，簡明加工工藝手冊。上海科學技術出版社，1991.
六、導教師審批意見