《醫療器械注冊管理辦法中英文翻譯[共48頁]》由會員分享，可在線閱讀，更多相關《醫療器械注冊管理辦法中英文翻譯[共48頁]（48頁珍藏版）》請?jiān)谘b配圖網上搜索。

1、醫療器械注冊管理辦法 Medical Devices Registration Administration Method 總則 Chapter 1 General Provisions 　　第一條　為規范醫療器械的注冊管理，保證醫療器械的安全、有效，根據《醫療器械監督管理?xiàng)l例》，制定本辦法。 Article 1 To regulate medical device registration management and ensure their safety and effectiveness of medical device, we set down the manag

2、ement measure according to Regulations for the Supervision and Administration of Medical Device. 　　第二條　在中華人民共和國境內銷售、使用的醫療器械均應當按照本辦法的規定申請注冊，未獲準注冊的醫療器械，不得銷售、使用。 Article 2 All the medical device which would like to sell and use within the territory of the People’s Republic of China shall apply for

3、 registration complying with this measure. These medical devices which not get China registration approval should be prohibited to sell and use. 　　第三條　醫療器械注冊，是指依照法定程序，對擬上市銷售、使用的醫療器械的安全性、有效性進行系統評價，以決定是否同意其銷售、使用的過程。 Article 3 Medical device registration is the process of doing systemic evaluation

4、 of plan-market medical device on their safety and effectiveness, then decide if medical device can be allowed to sell and use. 第四條　國家對醫療器械實行分類注冊管理。 Article 4 The state shall classify medical devices and administer them based on this classification. 　　境內第一類醫療器械由設區的市級（食品）藥品監督管理機構審查，批準后發給醫療器

5、械注冊證書。 Domestic Class I medical devices shall be inspected, approved and granted with a registration certificate by the food drug regulatory authority of the government of the municipalities consisting of districts. 　　境內第二類醫療器械由省、自治區、直轄市（食品）藥品監督管理部門審查，批準后發給醫療器械注冊證書。 Domestic Class II medical d

6、evices shall be inspected, approved and granted with a registration certificate by the food drug regulatory authorities of provinces, autonomous regions and municipalities directly under the central government. 　　境內第三類醫療器械由國家食品藥品監督管理局審查，批準后發給醫療器械注冊證書。 Domestic Class III medical device shall be

7、inspected, approved and granted with registration certificate by State Food Drug Administration. 　　境外醫療器械由國家食品藥品監督管理局審查，批準后發給醫療器械注冊證書。 Imported medical devices shall be inspected, approved and granted with registration certificate by State Food Drug Administration. 　　臺灣、香港、澳門地區醫療器械的注冊，除本辦法另

8、有規定外，參照境外醫療器械辦理。 Taiwan, Hongkong and Macao’s medical device registration shall refer to the regulation of imported medical device. 　　醫療器械注冊證書有效期4年。 Medical devices certificate is valid for 4 years. 　　第五條　醫療器械注冊證書由國家食品藥品監督管理局統一印制，相應內容由審批注冊的（食品）藥品監督管理部門填寫。 Article 5 Medical devices registra

9、tion certificate shall be pressed by State Food Drug Administration and the content shall be filled in by inspection department of food drug administration. 　　注冊號的編排方式為： Registration is arranged as the following: 　　（）1(食)藥監械（2）字3第456號。其中： X (X) 1 SFDA (X2) 字3第456號 　1 為注冊審批部門所在地的簡稱： X

10、1 : Shortened form of registration inspection department ‘s locus 　　境內第三類醫療器械、境外醫療器械以及臺灣、香港、澳門地區的醫療器械為“國”字； “國” is for domestic Class III medical devices, imported medical devices and medical devices of Taiwan, Hongkong and Macao. 境內第二類醫療器械為注冊審批部門所在的省、自治區、直轄市簡稱； 　　境內第一類醫療器械為注冊審批部門所在的省、自治區

11、、直轄市簡稱加所在設區的市級行政區域的簡稱，為1（無相應設區的市級行政區域時，僅為省、自治區、直轄市的簡稱）； 　 2為注冊形式（準、進、許）： 　　“準”字適用于境內醫療器械； “進”字適用于境外醫療器械； 　　“許”字適用于臺灣、香港、澳門地區的醫療器械； 　　3為批準注冊年份； 　　4為產品管理類別； 　　5為產品品種編碼； 　　6為注冊流水號。 　　醫療器械注冊證書附有《醫療器械注冊登記表》（見本辦法附件1），與醫療器械注冊證書同時使用。 Medical device registration certificate is attached with med

12、ical device registration record, and shall be used along with medical device registration certificate. 　　第六條　生產企業提出醫療器械注冊申請，承擔相應的法律義務，并在該申請獲得批準后持有醫療器械注冊證書。 Manufacturers put forward medical device registration application, take relevant regal responsibility and keep medical device registration c

13、ertificate after getting application approval. 　　辦理醫療器械注冊申請事務的人員應當受生產企業委托，并具有相應的專業知識，熟悉醫療器械注冊管理的法律、法規、規章和技術要求。 Individuals who do medical device registration application should be authorized by manufacturer, possess professional knowledge, are familiar with medical device registration administr

14、ation law, regulation, rules and technical requirement. 　　申請境外醫療器械注冊的，境外生產企業應當在中國境內指定機構作為其代理人，代理人應當承擔相應的法律責任；并且，境外生產企業應當委托中國境內具有相應資格的法人機構或者委托其在華機構承擔醫療器械售后服務。 When doing imported medical devices registration, the overseas manufactures shall authorize an unit to be their agent in Chinese territor

15、y and the agent should take relevant legal responsibilities. Meanwhile overseas manufactures shall authorize qualified body corporate or theirs own organ located in China to do after sales service. 　　第七條　申請注冊的醫療器械，應當有適用的產品標準，可以采用國家標準、行業標準或者制定注冊產品標準，但是注冊產品標準不得低于國家標準或者行業標準。 Article 7 Medical d

16、evices which applying for registration shall have suitable product standard that can adopt state standard, industry standard or edit registration standard, but registration standard should not inferior to state standard or industry standard. 　　注冊產品標準應當依據國家食品藥品監督管理局規定的醫療器械標準管理要求編制。 Registration

17、standard shall be edited according to medical device standard administration regulation stipulated by state food drug supervision administration. 　　第八條　申請第二類、第三類醫療器械注冊，生產企業應當符合國家食品藥品監督管理局規定的生產條件或者相關質量體系要求。 Article 8 Applying for Class II and Class III medical device registration, manufacture sh

18、all comply with relevant manufacturing condition or quality system requirement stipulated by state food drug supervision administration. 第二章 醫療器械注冊檢測 Chapter 2 Medical devices registration testing 　　第九條　第二類、第三類醫療器械由國家食品藥品監督管理局會同國家質量監督檢驗檢疫總局認可的醫療器械檢測機構進行注冊檢測，經檢測符合適用的產品標準后，方可用于臨床試驗或者申請注冊。 Ar

19、ticle 9 Class II and Class III medical devices shall be tested by medical device testing organization approbated by State Food Drug Supervision Administration and State Quality Supervision Inspection and Quarantine, then can be used in clinical trial or apply for registration. 　　經國家食品藥品監督管理局會同國

20、家質量監督檢驗檢疫總局認可的醫療器械檢測機構（以下簡稱醫療器械檢測機構）目錄另行發布。 The list of medical device testing organization approbated by State Food Drug Supervision Administration and State Quality Supervision Inspection and Quarantine (medical device testing organization for short in the following) shall be issued at another ti

21、me. 　　第十條　醫療器械檢測機構應當在國家食品藥品監督管理局和國家質量監督檢驗檢疫總局認可的檢測范圍內，依據生產企業申報適用的產品標準（包括適用的國家標準、行業標準或者生產企業制定的注冊產品標準）對申報產品進行注冊檢測，并出具檢測報告。 Article 10 Medical device testing organization should do registration testing on applicant products according to available product standard including state standard, industry

22、 standard or registration product standards edited by manufacture within the specific testing range approbated by State Food Drug Supervision Administration and State Quality Supervision Inspection and Quarantine. 　　尚未列入各醫療器械檢測機構授檢范圍的醫療器械，由相應的注冊審批部門指定有承檢能力的檢測單位進行檢測。 For the medical device that

23、have not been listed in testing range of all medical device testing organization should be tested by qualified testing united approbated by registration inspection department. 　　境外醫療器械的注冊檢測執行《境外醫療器械注冊檢測規定》。 Imported medical device registration shall perform “Imported Medical Device Registration

24、 Testing Regulation”. 　　第十一條　同一注冊單元內所檢測的產品應當是能夠代表本注冊單元內其他產品安全性和有效性的典型產品。 Among one testing unit the tested product should be the typical product that can representing the safety and effectiveness of other products. 　　第十二條　同一生產企業使用相同原材料生產的同類產品，如果生產工藝和預期用途保持不變，重新注冊時，對產品的生物學評價可以不再進行生物相容性試驗。 F

25、or re-registration the same kind products which made of same material and manufactured by one manufacturer would not be tested for biological compatibility item during biological evaluation if manufacturing technics and intended use do not change. 　 同一生產企業使用已經通過生物學評價的原材料生產的同類產品，如果生產工藝保持不變，預期用途保持

26、不變或者沒有新增的潛在生物學風險，申請注冊時，對產品的生物學評價可以不再進行生物相容性試驗。 When register the products which manufactured by one manufacturer, made of same material that have done biological evaluation and do not change their manufacturing technics, intended use and have no new potential biological risk would not be tested for

27、 biological compatibility during biological evaluation. 　　第十三條　申請第二類、第三類醫療器械注冊，同時滿足以下條件的，可以免予注冊檢測： Applying for Class II and Class III medical device registration will be exempted of doing registration testing if satisfy the following conditions: 　　（一）所申請注冊的醫療器械與本企業已經獲準注冊的醫療器械的基本原理，主要功能、結構，所

28、用材料、材質，預期用途屬于同一類； Applying medical device and applied medical device is same in the basic principle, main function, structure, material and intended use. 　?。ǘ┥a(chǎn)企業已經通過醫療器械生產質量管理規范檢查或者已經獲得醫療器械質量體系認證，并且生產企業能夠提供經原企業生產條件審查機構認可的檢測報告； The manufacturers have passed the medical device manufacturing qua

29、lity administration regulation testing or get approval of medical device quality system certification, meanwhile the manufacturers can provide the admissive testing report by inspection institution under former manufacturing condition. 　?。ㄈ┧暾堊缘尼t(yī)療器械與本企業已經獲準注冊并且已經通過注冊檢測的同類產品比較，未發生涉及安全性、有效性改變，或者

30、雖然涉及安全性、有效性改變，但是改變部分和由其引起產品其他相關安全性、有效性變化的部分都已經通過了醫療器械檢測機構檢測； Comparing with approved registration medical devices , the same kind of applying medical devices do not have changes concerning safety and effectiveness areas or despite of having changes concerning safety and effectiveness areas which h

31、ave been tested by medical device testing institution. 　　（四）已經獲準注冊的本企業同類產品按照規定進行醫療器械不良事件監測，并且未發現嚴重不良事件； The same kind of approved registration medical devices have not been found adverse events in the process of MDR. 　?。ㄎ澹┮呀?jīng)獲準注冊的本企業同類產品1年內無（食品）藥品監督管理部門產品質量監督抽查不合格記錄； The same kind of appro

32、ved registration medical devices have not been found ineligible records in the process of product quality selective examination by food drug supervision administration within one year. 　?。┚惩忉t(yī)療器械已經通過境外政府醫療器械主管部門的上市批準。 Overseas medical devices have got pre-market approval by overseas medical de

33、vice supervision government. 　　第十四條　申請第二類、第三類醫療器械產品重新注冊，同時滿足以下條件的，可以免予注冊檢測： Applying for Class II and Class III medical device re-registration will be exempted of doing registration testing if satisfy the following conditions: 　?。ㄒ唬┥暾堉匦伦缘尼t(yī)療器械與本企業已經獲準注冊的醫療器械的基本原理，主要功能、結構，所用材料、材質，預期用途屬于同一類；

34、Applying re-registration medical device and applied medical device is same in the basic principle, main function, structure, material and intended use. 　　（二）生產企業已經通過醫療器械生產質量管理規范檢查或者已經獲得醫療器械質量體系認證，并且生產企業能夠提供經原企業生產條件審查機構認可的檢測報告； The manufacturers have passed the medical device manufacturing qualit

35、y administration regulation testing or get approval of medical device quality system certification, meanwhile the manufacturers can provide the admissive testing report by inspection institution under former manufacturing condition. 　　（三）申請重新注冊的醫療器械與已經通過注冊檢測的原注冊產品相比較，未發生涉及安全性、有效性改變，或者雖然涉及安全性、有效性

36、改變，但是改變部分和由其引起產品其他相關安全性、有效性變化的部分都已經通過了醫療器械檢測機構檢測； Comparing with approved registration medical devices , the same kind of applying re-registration medical devices do not have changes concerning safety and effectiveness areas or despite of having changes concerning safety and effectiveness areas whi

37、ch have been tested by medical device testing institution. 　?。ㄋ模┥暾堉匦伦缘尼t(yī)療器械在原醫療器械注冊證書有效期內按照規定進行醫療器械不良事件監測，并且未發現不良事件； Applying for re-registration medical devices have not been found adverse events in the process of MDR within the expiration date of the former medical device certificate. 　　（五

38、）原注冊醫療器械1年內無（食品）藥品監督管理部門產品質量監督抽查不合格記錄。 The former approved registration medical devices have not been found ineligible records in the process of product quality selective examination by food drug supervision administration within one year. 　　第十五條　已經通過境外政府醫療器械主管部門的上市批準、對安裝場地有特殊要求、檢測困難的大型醫療器械，可以申

39、請暫緩檢測，于取得醫療器械注冊證書后再對產品進行補充檢測。 Huge medical equipments which have got pre-market notification by overseas medical device supervision department, need special requirements on spot installation and have difficulty for testing can applying for postpone testing can be done supplement testing after getti

40、ng medical device certificate. 　　根據前款規定申請暫緩檢測而獲準注冊的產品，生產企業必須在首臺醫療器械入境后、投入使用前完成注冊檢測。經檢測合格后方可投入使用。 For the products satisfied with above regulation that get registration approval when applying for postpone testing, the manufacture shall complete registration testing after importing the first medi

41、cal device, until the testing is eligible the product can be put into use. 第三章 醫療器械臨床試驗 Chapter 3 Medical device clinical trial 　　第十六條　申請第二類、第三類醫療器械注冊，應當提交臨床試驗資料。 When applying for Class II and Class III medical devices registration, clinical trial material should be submitted. 　　臨床試驗資

42、料提供方式執行《醫療器械注冊臨床試驗資料分項規定》（見本辦法附件12）。 The submission methods of clinical trial material shall comply to ‘Medical Device Registration on Clinical Trial Material Itemize Regulation’.(Refer to attachment 12) 　　第十七條　 在中國境內進行醫療器械臨床試驗的，應當嚴格執行《醫療器械臨床試驗規定》。 The clinical trial processed in China shall st

43、rictly comply to ‘Medical Device Clinical Trial Regulation’. 　　第十八條　在中國境內進行臨床試驗的醫療器械，其臨床試驗資料中應當包括臨床試驗合同、臨床試驗方案、臨床試驗報告。 The clinical trial material of medical devices processed in China shall include clinical trail agreement, clinical trial project and clinical trial report. 　?。ㄊ称罚┧幤繁O(jiān)督管理部門認為必

44、要時，可以要求生產企業提交臨床試驗須知、知情同意書以及臨床試驗原始記錄。 Food drug supervision administration could ask manufacture to provide clinical trial memorandum, acknowledgment letter and clinical trial original records. 第四章 醫療器械注冊申請與審批 Chapter 4 Medical device registration application and inspection 　　第十九條　申請醫療器械注冊，申請

45、人應當根據醫療器械的分類，向本辦法第四條規定的相應（食品）藥品監督管理部門提出申請，并應當填寫醫療器械注冊申請表，按照本辦法附件2、附件3、附件6、附件8或者附件9的相應要求提交申請材料。申請材料應當使用中文；根據外文資料翻譯的申請材料，應當同時提供原文。 When applying for medical devices registration, applicants shall accord with the medical device classification and apply to concerning food drug supervision administrati

46、on according to item 4 of this methods. 　　申請人提交的醫療器械說明書應當符合《醫療器械說明書、標簽和包裝標識管理規定》。 Medical device user manual submitted by applicants shall accord with ‘Administration Regulation of Medical Device user manual, labeling and package . 　　申請人應當對其申請材料全部內容的真實性負責。 Applicants shall take the responsib

47、ility of the truth about the fully application material. 　　第二十條　 （食品）藥品監督管理部門收到申請后，應當根據下列情況分別作出處理： Food drug supervision administration shall treat respectively depending on the following conditions: 　　（一）申請事項依法不屬于本部門職權范圍的，應當即時作出不予受理的決定，并告知申請人向有關行政機關申請； If application articles legally do no

48、t belong to authorized scope of this department, should issue a rejection notice and advance applicants to apply for concerning administration unit. 　?。ǘ┥暾埐牧洗嬖诳梢援?dāng)場更正的錯誤的，應當允許申請人當場更正； If there is mistake in the application material that could be correct on-spot, the applicants shall be permitt

49、ed to correct on spot. 　?。ㄈ┥暾埐牧喜积R全或者不符合形式審查要求的，應當當場或者在5個工作日內發給申請人《補正材料通知書》，一次性告知申請人需要補正的全部內容，逾期不告知的，自收到申請材料之日起即為受理； If the application material is incomplete or not in accord with formal inspection requirement, please inform applicant on-spot or issue applicant with ‘Supplement Material Notic

50、e Letter’ within 5 workdays and inform applicant all the requested supplementary material at one time. Without informing within appointed period, the material receiving date should be regarded as the acceptance date. ?。ㄋ模┥暾埐牧淆R全、符合形式審查要求的，或者申請人按照要求提交全部補正申請材料的，予以受理。 It should be accepted if the

51、application material is complete, accord with formal inspection request or applicants submit all requested supplement material according to the concerning requirements. 　?。ㄊ称罚┧幤繁O(jiān)督管理部門受理或者不予受理醫療器械注冊申請，應當出具加蓋本部門專用印章并注明日期的《受理通知書》或者《不予受理通知書》。 Whatever food drug supervision administration accept med

52、ical devices application or not, an acceptance notice or a rejection letter should be issued by department with special seal and date. 　　第二十一條　（食品）藥品監督管理部門受理醫療器械注冊申請后，應當在本辦法第二十二條規定的期限內對申請進行實質性審查并作出是否給予注冊的書面決定。經審查符合規定批準注冊的，自書面批準決定作出之日起10個工作日內發給醫療器械注冊證書。經審查不符合規定的，作出不予注冊的書面決定，并說明理由，同時告知申請人享有依法申請行政復

53、議或者提起行政訴訟的權利。 Food drug supervision administration shall do substantiality inspection on application and make a paper decision on whether administer registration according to the stipulated term in item 22 of this method. On the condition that material accords with inspection regulation and adminis

54、ter registration, medical device registration certificates shall be issued within 10 workdays counted from date of the paper approval decision-making. 　　第二十二條　設區的市級（食品）藥品監督管理機構應當自受理申請之日起30個工作日內，作出是否給予注冊的決定。 Food Drug regulatory authority of the government of the municipalities consisting of di

55、stricts shall make a division whether to administer registration within 30 workdays from the date of application. 　　省、自治區、直轄市（食品）藥品監督管理部門應當自受理申請之日起60個工作日內，作出是否給予注冊的決定。 Food Drug regulatory authorities of the provinces, autonomous regions and municipalities shall make a division whether to admi

56、nister registration within 60 workdays form the date of application. 　　國家食品藥品監督管理局應當自受理申請之日起90個工作日內，作出是否給予注冊的決定。 Food Drug regulatory authority directly under State Council shall make a make a division whether to administer registration within 90 workdays form the date of application. 在對注冊申

57、請進行審查的過程中，需要檢測、專家評審和聽證的，所需時間不計算在本條規定的期限內。（食品）藥品監督管理部門應當將所需時間書面告知申請人。 In the process of inspection, if testing, technical review by specialists and audit are needed, the requested time is besides from the regulated period of this article. Food Drug Administration shall inform applicants with paper n

58、otice about the needed time. 　　第二十三條　未獲得境外醫療器械上市許可的境外醫療器械，申請注冊時，參照境內同類產品注冊的技術審查要求執行（需要提交的材料見本辦法附件8、附件9）。 When apply for registration, the imported medical devices without marketing permission at overseas shall refer to registration technical inspection requirements of the domestic products in t

59、he same kind (the requested submission material shall refer to attachment 8 and attachment 9). 　　第二十四條　（食品）藥品監督管理部門在對醫療器械注冊申請材料進行技術審查時，需要生產企業補充材料的，應當一次性發出書面補充材料通知。 In the inspection process of medical devices registration application material, SFDA shall issue paper supplementary notice to man

60、ufacture at one time if supplementary material is needed. 　　生產企業應當在60個工作日內按照通知要求將材料一次性補齊，補充材料的時間不計算在（食品）藥品監督管理部門進行實質審查的期限內。生產企業未能在規定的時限內補充材料且沒有正當理由的，終止審查。 Manufacture shall submit all the requested supplementary material at one time according to requirement within 60 workdays. The additional ti

61、me can not be counted to the SFDA’s substantial inspection time. Inspection shall be discontinued that manufactures do not supplement the requested material within regulated time and have no allowable reason. 　　第二十五條　注冊申請被終止審查的，在被終止審查后的6個月內不得再次申請。 For the discontinued inspection, re-registratio

62、n should not applied within 6 months from the discontinued date. 　　第二十六條　生產企業對補充材料通知內容有異議的，可以在規定的時限內向（食品）藥品監督管理部門提出書面意見，說明理由并提供技術支持材料，經（食品）藥品監督管理部門審查后作出決定。 If manufactures have suspicion for the supplementary material notice, a paper suggestion can be advanced to SFDA at limited time, explain e

63、xcuse and offer technical supporting material that shall be inspected by SFDA, finally SFDA will give a decision. 　　第二十七條　醫療器械產品的注冊單元原則上以技術結構、性能指標和預期用途為劃分依據。 Basically the classification basis of medical devices registration unit is technological structure, performance and intended use. 　　第

64、二十八條　作為部件注冊的醫療器械，申請人應當說明與該部件配合使用的推薦產品、部件的名稱、型號、規格。 For medical devices registered as parts, applicants shall explain the recommended products, parts name, model and specifications to work with them. 已經獲準注冊的部件組合成的整機，必須履行整機注冊手續。 A complete machine combined with all registered parts shall implem

65、ent complete unit registration procedure. 　　以整機注冊的醫療器械，申請注冊時應當列出其主要配置。如果某個主要配置部件性能規格發生改變，整機應當重新注冊。 When medical devices registering as a complete unit, its main deployment should be listed. A new re-registration should be requested if the main deployments change their performance and speci

66、fications. 　　以整機注冊的醫療器械，其醫療器械注冊證書附表中的“產品性能結構及組成”欄內所列出的組合部件在不改變組合形式和預期用途的情況下單獨銷售的，可以免予單獨注冊。 If the combination parts which have been registered as a complete unit listed on column ‘performance, structure and components of the product’ of the ‘Medical Device Registration Record ’would be allowed to exempt from sole registration when be sold solely without changing its combination form and intended use. 　　 第二十九條?。ㄊ称罚┧幤繁O(jiān)督管理部門應當在行政機關的網站和醫療器械注冊辦公場所公示相應的