19、en
temp<=temp+1;
else
temp<="0000";
clko<=not clko;
end if;end if;
end process;
end a;
正弦函數模塊
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_arith.all;
use ieee.std_logic_unsigned.all;
entity sin is
port(clk4:in std_logic;
k::
20、in integer range 15 downto 0;
dd4:out integer range 255 downto 0);
end sin;
architecture dacc of sin is
signal q: integer range 63 downto 0;
begin
process(clk4)
begin
if (clk4'event and clk4='1') then
q<=q+k;
end if;
21、
end process;
process(q)
begin
case q is
when 00=>dd4<=255;
when 01=>dd4<=254;
when 02=>dd4<=253; when 36=>dd4<=10;
when 03=>dd4<=250; when 37=>dd4<=15;
when 04=>dd4<=245;
22、when 41=>dd4<=47;
when 05=>dd4<=240; when 38=>dd4<=21;
when 06=>dd4<=234; when 39=>dd4<=29;
when 07=>dd4<=226; when 40=>dd4<=37;
when 08=>dd4<=218; when 41=>dd4<=47;
when 09=>dd4<=208; when 42=>dd4<=57;
when 10=>dd
23、4<=198; when 43=>dd4<=67;
when 11=>dd4<=188; when 44=>dd4<=79;
when 12=>dd4<=176; when 45=>dd4<=90;
when 13=>dd4<=165; when 46=>dd4<=103;
when 14=>dd4<=152; when 47=>dd4<=115;
when 15=>dd4<=140; when
24、 48=>dd4<=128
when 16=>dd4<=128; when 49=>dd4<=140;
when 17=>dd4<=115; when 50=>dd4<=165;
when 18=>dd4<=103; when 51=>dd4<=176;
when 19=>dd4<=90; when 52=>dd4<=188;
when 20=>dd4<=79; when 53=>dd4<=198;
when 21=>d
25、d4<=67; when 54=>dd4<=208;
when 22=>dd4<=57; when 55=>dd4<=218;
when 23=>dd4<=47; when 56=>dd4<=226;
when 24=>dd4<=37; when 57=>dd4<=234;
when 25=>dd4<=29; when 58=>dd4<=240;
when 26=>dd4<=21;
26、when 59=>dd4<=245;
when 27=>dd4<=15; when 60=>dd4<=250;
when 28=>dd4<=10; when 61=>dd4<=253;
when 29=>dd4<=5; when 62=>dd4<=254;
when 30=>dd4<=2; when 63=>dd4<=255;
when 31=>dd4<=1; when 63=>dd4<=255;
when
27、32=>dd4<=0; when others=>null;
when 33=>dd4<=1; end case;
when 34=>dd4<=2; end process;
when 35=>dd4<=5; end dacc;
三角波
library ieee;
use ieee.std_logic_1164.al
28、l;
use ieee.std_logic_unsigned.all;
entity tria is
port(clk3:in std_logic;
k:in integer range 15 downto 0;
dd3:out integer range 255 downto 0);
end tria;
architecture dacc of tria is
signal b:std_logic;
signal c:integer range 255 downto 0;
begin
process(clk3)
begin
if
29、(clk3'event and clk3='1') then
if(b='0') then
c<=c+k;
if(c>=250) then
b<='1';
end if;
elsif(b='1') then
c<=c-k;
if(c<=1) then
b<='0';
end if;
end if;
dd3<=c;
end if;
end process;
end dacc;
方波
30、
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_arith.all;
use ieee.std_logic_unsigned.all;
entity square is
port(clk1 : in std_logic;
k:in integer range 15 downto 0;
dd1 : buffer integer range 255 downto 0);
end square;
architecture dacc of square is
31、
signal q: integer range 255 downto 0;
begin
process(clk1)
begin
if (clk1'event and clk1='1') then
q<=q+k;
end if;
end process;
process(q)
begin
case q is
when 0 to 127=>dd1<=255;
when 128 to 255=>dd1<=127;
when others=>null;
end case;
end process;
end dac
32、c;
特殊波形
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_arith.all;
use ieee.std_logic_unsigned.all;
entity sintra is
port(clk4:in std_logic;
k:in integer range 15 downto 0;
dd4:out integ
33、er range 255 downto 0);
end sintra;
architecture dacc of sintra is
signal q: integer range 63 downto 0;
begin
process(clk4)
begin
if (clk4'event and clk4='1') then
q<=q+k;
end if;
end process;
process(q)
begin
case q is
when 00=>dd4<=255;
when 01=>dd4<
34、=254;
when 02=>dd4<=253; when 36=>dd4<=10;
when 03=>dd4<=250; when 37=>dd4<=15;
when 04=>dd4<=245; when 41=>dd4<=47;
when 05=>dd4<=240; when 38=>dd4<=21;
when 06=>dd4<=234; when 39=>
35、dd4<=29;
when 07=>dd4<=226; when 40=>dd4<=37;
when 08=>dd4<=218; when 41=>dd4<=47;
when 09=>dd4<=208; when 42=>dd4<=57;
when 10=>dd4<=198; when 43=>dd4<=67;
when 11=>dd4<=188; when 44=>dd4<=79;
when 12=>dd4<=176;
36、 when 45=>dd4<=90;
when 13=>dd4<=165; when 46=>dd4<=103;
when 14=>dd4<=152; when 47=>dd4<=115;
when 15=>dd4<=140; when 48=>dd4<=128
when 16=>dd4<=128; when 49=>dd4<=140;
when 17=>dd4<=115; when 50=>dd4
37、<=165;
when 18=>dd4<=103; when 51=>dd4<=176;
when 19=>dd4<=90; when 52=>dd4<=188;
when 20=>dd4<=79; when 53=>dd4<=198;
when 21=>dd4<=67; when 54=>dd4<=208;
when 22=>dd4<=57; when 55=>dd4<=218;
when 23=>dd4<=47;
38、 when 56=>dd4<=226;
when 24=>dd4<=37; when 57=>dd4<=234;
when 25=>dd4<=29; when 58=>dd4<=240;
when 26=>dd4<=21; when 59=>dd4<=245;
when 27=>dd4<=15; when 60=>dd4<=250;
when 28=>dd4<=10; when 61
39、=>dd4<=253;
when 29=>dd4<=5; when 62=>dd4<=254;
when 30=>dd4<=2; when 63=>dd4<=255;
when 31=>dd4<=1; when 63=>dd4<=255;
when 32=>dd4<=0; when others=>null;
when 33=>dd4<=1; end case;
when 34=>dd4<=2;
40、 end process;
when 35=>dd4<=5; end dacc;
分頻1Hz
LIBRARY IEEE;
USE IEEE.STD_LOGIC_1164.ALL;
USE IEEE.STD_LOGIC_UNSIGNED.ALL;
ENTITY fp1HZ IS
PORT(clk:in std_logic; --10M
clk1Hz: buffer STD_LOGIC);
41、
END fp1hz;
ARCHITECTURE one OF fp1hz IS
SIGNAL test: integer range 0 to 6000000;
begin
process(clk)
begin
if clk'event and clk='1' then
if test<5000000 then
test<=test+1;
else
test<=0;
clk1hz<=not clk1hz;
end if;
end if;
end process;
end one;
測頻模塊
LIBRA
42、RY IEEE;
USE IEEE.STD_LOGIC_1164.ALL;
USE IEEE.STD_LOGIC_UNSIGNED.ALL;
ENTITY freq IS
PORT(fsin: in STD_LOGIC;
clk: IN STD_LOGIC;
dout0,dout1,dout2,dout3: OUT STD_LOGIC_VECTOR(3 DOWNTO 0));
END freq;
ARCHITECTURE one OF freq IS
SIGNAL test_en: STD_LOGIC;
SIGNAL
43、clear: STD_LOGIC;
SIGNAL data: STD_LOGIC_VECTOR(15 DOWNTO 0);
BEGIN
PROCESS(clk)
BEGIN
IF clk'event AND clk='1' THEN test_en<=NOT test_en;
END IF;
END PROCESS;
clear<=NOT clk AND NOT test_en;
PROCESS(fsin)
BEGIN
IF clear='1' THEN data<="0000";
ELSIF fsin'ev
44、ent AND fsin='0'
THEN
IF data(15 DOWNtO 0)="1001"
THEN data<=data+"0111";
elsIF data(11 DOWNtO 0)=""
THEN data<=data+"";
ELSIF data(7 DOWNTO 0)="10011001"
THEN data<=data+"01100111";
ELSIF data(3 DOWNTO 0)="1001"
THEN data<=data+"0111";
ELSE data<=data+1;
45、 END IF;
END IF;
END PROCESS;
PROCESS(test_en,data)
BEGIN
IF test_en'event AND test_en='0' THEN
dout0<=data(3 downto 0);
dout1<=data(7 downto 4);
dout2<=data(11 downto 8);
dout3<=data(15 downto 12);
END IF;
46、 END PROCESS;
END one;
控制模塊
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_arith.all;
use ieee.std_logic_unsigned.all
entity control is
port(sel:in std_logic_vector(1 downto 0);
k0,k1,k2,k3:in integer range 255 downto 0;
qout:out i
47、nteger range 255 downto 0);
end control;
architecture a of control is
begin
process(sel,k0,k1,k2,k3)
begin
if sel=“00” then
qout<=k0;
elsif sel=“01” then
qout<=k1;
elsif sel=“10” then
qout<=k2;
elsif se
48、l=“11” then
qout<=k3;
end if;
end process;
end a;
3.4 電路模塊組成及引腳設置
3.4.1路模塊組成
3.4.2引腳設置
3.5 硬件實現及調試結果
下載編譯成功后，定義芯片管腳，開關K1、K2、K3控制分頻系數，K14、K15為Sel選擇信號，Sel=00時為正弦波，Sel=01時為三角波，Sel=10時為方波，Sel=11時為特殊波形。將示波器連接到硬件上，觀察輸出波形。
第四章 課程設計總
49、結
通過這次課程設計，我受益匪淺。我們不僅鞏固了課上學到的知識，提高了我們實際動手的能力，而且了解到理論聯系實際和團結協作的重要性。同時我們也意識到在以后的學習和生活中要始終保持一絲不茍的態度，杜絕馬虎的態度，只有理論知識是遠遠不夠的，只有把所學的理論知識與實踐相結合起來，從理論中得出結論，才能真正為社會服務，從而提高自己的實際動手能力和獨立思考的能力。在設計的過程中遇到問題，可以說得是困難重重，這畢竟第一次做的，難免會遇到過各種各樣的問題，同時在設計的過程中發現了自己的不足之處，對以前所學過的知識理解得不夠深刻，掌握得不夠牢固。
通過本次設計，增加自己的理論知識，系統的了解了波形發生器的
50、設計流程，尤其是硬、軟件的設計方法，掌握了波形發生器的基本功能及編程方法，掌握了它的一般原理，也進一步掌握了QuartusⅡ的使用。而且也開拓了思路，鍛煉了實踐動手能力，提高了分工協作能力和分析問題，解決問題的能力，達到了本次課程設計的目的。
此次任意波形發生器的設計,給我留下深刻的印象。我會在以后的學習、生活中磨練自己，使自己能夠滿足社會的需求。同時，我非常感謝張老師的指導，在她的細心講解下，我順利的完成的此次任意波形發生器的課程設計。
參考文獻
[1] 江國強 EDA技術與應用 北京：電子工業出版社，2005
[2]孫加存 電子設計自動化 西安：西安電子科技大學出版社 2008
[3] 林明權，等 VHDL數字控制系統設計范例 北京：電子工業出版社，2005
[4] 焦素敏 EDA應用技術 北京：清華大學出版社，2005
[5] 王振紅 VHDL數字電路設計與應用實踐教程 北京：機械工業出版社，2003
EDA課程設計副本
