【畢業設計E】（機械手）機床上下料機械手設計
【畢業設計E】（機械手）機床上下料機械手設計,畢業設計E,畢業設計,機械手,機床,上下,設計
姓名：安興偉
任務下達日期： 2006 年 3 月 13 日
設計（論文）開始日期： 2006 年 3 月 13 日
設計（論文）完成日期： 2006 年 6 月 20 日
一、設計（論文）題目：數控機床上下料機械手設計
二、專題題目： 高速切削的數控加工工藝
三、設計的目的和意義：通過對機械設計制造及其自動化專業機制方向大學本科四年的所學知識進行整合，完成一個特定功能、特殊要求的檢測、控制儀器的制作，能夠充分、完整地體現電子信息工程專業類畢業生的理論研究水平，實踐動手能力以及專業精神和態度，具有較強的針對性和明確的實施目標，能夠?qū)崿F(xiàn)理論到實踐的有機結合。本設計能夠廣泛應用于家庭、車站、碼頭、醫療機構等需要對人體溫度進行實時檢測的場所，滿足用戶對體溫實時測試的要求，并能夠?qū)w溫進行實時顯示和對體溫異?，F(xiàn)象進行報警。目前，本設計的國內外研究及應用主要體現在2003年全國抗擊“非典”期間，清華大學深圳研究所研制的“紅外數字體溫計”以及同時期出現的國內其他生產廠家制作的“數字遙感體溫計”。
四、設計（論文）主要內容：（1） 機械手的整體結構設計及其總裝圖、液壓系統圖和PLC接線圖以及具體零件圖的繪制（一張零號圖，三張一號圖，二張二號圖，合計三張零號圖）（2）具體設計過程及其合理性的文字說明。
五、設計目標：完成對機械手的總體結構設計，主要是設計合理的液壓傳動系統，以及PLC控制程序，能合理地控制機械手上下料。
六、進度計劃： 2006年3月13日至3月31日進行為期3周的生產實習；4月1日至4月20日完成對設計題目的資料收集與查詢；4月21日至5月31日完成對設計圖紙的繪制；6月1日至6月20日完成畢業設計說明書的編寫；6月21日至6月24日最后的審稿及說明書和圖紙的打印。
七、參考文獻資料：
1 付永領, 王巖, 裴忠才. 基于CAN總線液壓噴漆機器人控制系統設計與實現. 機床與液壓. 2003, (6): 90~92
2 丁又青, 朱新才. 一種新型型鋼翻面機液壓系統設計. 機床與液. 2003, (5): 128~129
3 劉劍雄, 韓建華. 物流自動化搬運機械手機電系統研究. 機床與液壓. 2003, (1): 126~128
4 徐軼, 楊征瑞, 朱敏華, 溫齊全. PLC在電液比例與伺服控制系統中的應用. 機床與液壓. 2003, (5): 143~144
5 胡學林. 可編程控制器(基礎篇). 北京: 電子工業出版社, 2003.
6 胡學林. 可編程控制器(實訓篇). 北京: 電子工業出版社, 2004.
7 孫兵, 趙斌, 施永康. 基于PLC的機械手混合驅動控制. 液壓與氣動. 2005, (3): 37~39
8 孫兵, 趙斌, 施永康. 物料搬運機械手的研制. 機電一體化. 2005, (2): 43~45
9 王田苗, 丑武勝. 機電控制基礎理論及應用. 北京: 清華大學出版社, 2003.
10 李建勇. 機電一體化技術. 北京: 科學出版社, 2004.
11 王孫安, 杜海峰, 任華. 機械電子工程. 北京: 科學出版社,2003.
12 張啟玲, 何玉安. PLC在氣動控制稱量包裝裝置中的應用. 液壓與氣動. 2005, (1): 31~33
13趙文. 數字控制技術在龍門刨床電控系統中的應用. 電氣傳動. 2005. 35 卷(3): 55~57
14 沈興全, 吳秀玲. 液壓傳動與控制. 北京: 國防工業出版社, 2005.
15 王憲軍, 趙存友. 液壓傳動. 哈爾濱: 哈爾濱工程大學出版社, 2002.
16 徐灝等. 機械設計手冊. 第5卷. 北京: 機械工業出版社, 2000.
17陳鐵鳴, 王連明, 王黎欽. 機械設計(修訂版). 哈爾濱: 哈爾濱工業大學出版社, 2003.
18 鄧星鐘. 機電傳動控制(第三版). 武漢: 華中科技大學出版社, 2001.
19 西門子自動化與驅動集團(SIEMENS AG). S7-200系統手冊. 2002.
20 蔡行健. 深入淺出西門子S7-200 PLC. 北京: 北京航空航天大學出版社, 2003.
22 張利平. 現代液壓技術應用220例. 化學工業出版社, 2004.
23 高西林. 鍛床上料機械手. 輕工機械. 2001, (2):
24 李春波, 王大明, 李哲, 王祖溫. PLC控制的氣動上下料機械手. 液壓氣動與密封, 1999. 12. (6): 21~24
25 尹自榮, 熊曉紅, 駱際煥, 王建坤. 數控上下料機械手的研究及應用. 鍛壓機械. 1994, (6): 3~5
26 張波, 李衛民, 尚銳. 多功能上下料用機械手液壓系統. 2002， (8): 31~32
27 侯沂, 劉濤. 裝卸機械手設計研究. 機械. 2004, 第31卷 (6): 53~54
28 葉愛芹, 袁金強. PLC在機械手控制系統中的應用. 安徽技術師范學院學報. 2001, 15卷(4): 64～65
29 王會香, 孫全穎. 自動涂膠機械手的PLC控制. 哈爾濱理工大學學報. 2002，7卷(5): 16~18
30 潘沛霖, 楊宏, 高波, 吳偉光. 四自由度折疊式機械手的結構設計與分析.哈爾濱工業大學學報. 1994, 26卷(4): 90~95
31 劉新一. 多工位自動沖床機械手控制器設計. 廣州大學學報（綜合版）. 2000, 第14卷(3): 19~20
32吉愛國, 馮汝鵬, 郭偉, 張錦江. 計算機在機械手控制中的應用. 機械與電子. 1996, (6): 8~9
指 導 教 師：
院（系）主管領導：
年 月 日
畢業設計（或論文）說明書
摘 要
通過對機械設計制造及其自動化專業大學本科四年的所學知識進行整合，對工業機械手各部分機械結構和功能的論述和分析，設計了一種圓柱坐標形式的數控機床上下料機械手。重點針對機械手的腰座、手臂、手爪等各部分機械結構以及機械手控制系統進行了詳細的設計。具體進行了機械手的總體設計，腰座結構的設計，機械手手臂結構的設計，機械手腕部的結構設計，末端執行器（手爪）的結構設計，機械手的機械傳動機構的設計，機械手驅動系統的設計。同時對液壓系統和控制系統進行了理論分析和計算?；赑LC對機械手的控制系統進行了深入細致的設計，通過對機械手作業的工藝過程和控制要求的分析，設計了控制系統的硬件電路，同時編制了機械手的控制程序。設計達到了設計的預期目標。
關鍵詞：機械手；PLC；液壓伺服定位；電液系統
Abstract
Integrate the knowledge of the past four years’ of undergraduate course of Machine, discuss and analysis the each part and function of manipulator; design a kind of cylinderical coordinate manipulator used to pack and unload work piece for CNC machine tools. In particular, made the detailed design about base, arm, and end effector and the control system etc. including Total design, waist’s construction design, the arm’s construction design, the wrist’s construction design, the end effector’s construction design, and the drive system of manipulator. At the same time, analysis and compute the hydraulic pressure system and control system. Deeply design the manipulator’s control system, which based on PLC. After analysis about the craft process and the requests of the manipulator, the hardware circuit and the control program of the manipulator then is designed. In a word, the design of the manipulator has come to the anticipant object.
Keyways: Manipulator；PLC；Hydraulic servo control；Electrohydraulic system
目 錄
摘要 Ⅰ
Abstract Ⅱ
第1章 緒論 1
1.1 選題背景 1
1.2 設計目的 1
1.3 國內外研究現狀和趨勢 2
1.4 設計原則 3
第2章 設計方案的論證 3
2.1機械手的總體設計 3
2.1.1 機械手總體結構的類型 3
2.1.2 設計具體采用方案 4
2.2機械手腰座結構的設計 5
2.2.1 機械手腰座結構的設計要求 5
2.2.2 設計具體采用方案 6
2.3機械手手臂結構的設計 7
2.3.1 機械手手臂的設計要求 7
2.3.2 設計具體采用方案 8
2.4工業機器人腕部的結構 9
2.4.1機器人手腕結構的設計要求 9
2.4.2設計具體采用方案 10
2.5機械手末端執行器（手爪）的結構設計 10
2.5.1機械手末端執行器的設計要求 11
2.5.2 機器人夾持器的運動和驅動方式 12
2.5.3機器人夾持器的典型結構 12
2.5.4設計具體采用方案 13
2.6機械手的機械傳動機構的設計 13
2.6.1工業機器人傳動機構設計應注意的問題 14
2.6.2工業機器人常用的傳動機構形式 15
2.6.3 設計具體采用方案 18
2.7機械手驅動系統的設計 18
2.7.1機器人各類驅動系統的特點 18
2.7.2工業機器人驅動系統的選擇原則 19
2.7.3機器人液壓驅動系統 20
2.7.4機器人氣動驅動系統 21
2.7.5 機器人電動驅動系統 23
2.7.6 設計具體采用方案 25
2.8機器人手臂的平衡機構設計 26
2.8.1 機器人平衡機構的形式 26
2.8.2 設計具體采用的方案 26
第3章 理論分析和設計計算 27
3.1液壓傳動系統設計計算 27
3.1.1 確定液壓系統基本方案 27
3.1.2 擬定液壓執行元件運動控制回路 28
3.1.3 液壓源系統的設計 28
3.1.4 繪制液壓系統圖 29
3.1.5確定液壓系統的主要參數 30
3.1.6 計算和選擇液壓元件 35
3.1.7 液壓系統性能的驗算 37
3.2電機選型有關參數計算 37
3.2.1 有關參數的計算 37
3.2.2 電機型號的選擇 40
第4章 機械手控制系統的設計 41
4.1機械手控制系統硬件設計 41
4.1.1 機械手工藝過程與控制要求 41
4.1.2 機械手的作業流程 42
4.1.3 機械手操作面板布置 43
4.1.4 控制器的選型 45
4.1.5 控制系統原理分析 45
4.1.6 PLC外部接線設計 46
4.1.7 I/O地址分配 47
4.2機械手控制系統軟件設計 49
4.2.1機械手控制主程序流程圖 49
4.2.2機械手控制程序設計 49
技術經濟分析 51
結論 52
專題部分 53
參考文獻 64
附錄1 66
附錄2 71
附錄3 78
致謝 94
V
附錄1：
車床及其切削加工
車床主要是為了進行車外圓、車端面和鏜孔等項工作而設計的機床。車削很少在其他種類的機床上進行，而且任何一種其他機床都不能像車床那樣方便地進行車削加工。由于車床還可以用來鉆孔和鉸孔，車床的多功能性可以使工件在一次安裝中完成幾種加工。因此，在生產中使用的各種車床比任何其他種類的機床都多。
車床的基本部件有：床身、主軸箱組件、尾架組件、溜板組件、絲杠和光杠。
床身是車床的基礎件。它通常是由經過充分正火或時效處理的灰鑄鐵或者球墨鑄鐵制成。它是一個堅固的剛性框架，所有其他基本部件都安裝在床身上。通常在床身上有內外兩組平行的導軌。有些制造廠對全部四條導軌都采用導軌尖頂朝上的三角形導軌(即山形導軌)，而有的制造廠則在一組中或者兩組中都采用一個三角形導軌和一個矩形導軌。導軌要經過精密加工，以保證其直線度精度。為了抵抗磨損和擦傷，大多數現代機床的導軌是經過表面淬硬的，但是在操作時還應該小心，以避免損傷導軌。導軌上的任何誤差，常常意味著整個機床的精度遭到破壞。
主軸箱安裝在內側導軌的固定位置上，一般在床身的左端。它提供動力，并可使工件在各種速度下回轉。它基本上由一個安裝在精密軸承中的空心主軸和一系列變速齒輪——類似于卡車變速箱一所組成。通過變速齒輪，主軸可以在許多種轉速下旋轉。大多數車床有8-18種轉速，一般按等比級數排列。而且在現代機床上只需扳動2-4個手柄，就能得到全部轉速。一種正在不斷增長的趨勢是通過電氣的或者機械的裝置進行無級變速。
由于機床的精度在很大程度上取決于主軸，因此，主軸的結構尺寸較大，通常安裝在預緊后的重型圓錐滾子軸承或球軸承中。主軸中有一個貫穿全長的通孔，長棒料可以通過該孔送料。主軸孔的大小是車床的一個重要尺寸，因?yàn)楫?dāng)工件必須通過主軸孔供料時，它確定了能夠加工的棒料毛坯的最大尺寸。
尾架組件主要由三部分組成。底板與床身的內側導軌配合，并可以在導軌上做縱向移動。底板上有一個可以使整個尾架組件夾緊在任意位置上的裝置。尾架體安裝在底板上，可以沿某種類型的鍵槽在底板上橫向移動，使尾架能與主軸箱中的主軸對正。尾架的第三個組成部分是尾架套筒。它是一個直徑通常大約在51—76mm(2-3英寸)之間的鋼制空心圓柱體。通過手輪和螺桿，尾架套筒可以在尾架體中縱向移人和移出幾英寸。
車床的規格用兩個尺寸表示。第一個稱為車床床面上最大加工直徑。這是在車床上能夠旋轉的工件的最大直徑。它大約是兩頂尖連線與導軌上最近點之間距離的兩倍。第二個規格尺寸是兩頂尖之間的最大距離。車床床面上最大加工直徑表示在車床上能夠車削的最大工件直徑，而兩頂尖之間的最大距離則表示在兩個頂尖之間能夠安裝的工件的最大長度。
普通車床是生產中最經常使用的車床種類。它們是具有前面所敘述的所有那些部件的重載機床，并且除了小刀架之外，全部刀具的運動都有機動進給。它們的規格通常是：車床床面上最大加工直徑為305-610mm(12-24英寸)；兩頂尖之間距離為610—1 219mm(24-48英寸)。但是，床面上最大加工直徑達到1 270mm(50英寸)和兩頂尖之間距離達到3 658mm(12英尺)的車床也并不少見。這些車床大部分都有切屑盤和一個安裝在內部的冷卻液循環系統。小型的普通車床——車床床面最大加工直徑一般不超過330mm(13英寸)——被設計成臺式車床，其床身安裝在工作臺或柜子上。
雖然普通車床有很多用途，是很有用的機床，但是更換和調整刀具以及測量工件花費很多時間，所以它們不適合在大量生產中應用。通常，它們的實際加工時間少于其總加工時間的30％。此外，需要技術熟練的工人來操作普通車床，這種工人的工資高而且很難雇到。然而，操作工人的大部分時間卻花費在簡單的重復調整和觀察切屑產生過程上。因此，為了減少或者完全不雇用這類熟練工人，六角車床、螺紋加工車床和其他類型的半自動和自動車床已經很好地研制出來，并已經在生產中得到廣泛應用。
普通車床作為最早的金屬切削機床中的一種，目前仍然有許多有用的和為人們所需要的特性。現在，這些機床主要用在規模較小的工廠中，進行小批量的生產，而不是進行大批量的生產。
在現代的生產車間中，普通車床已經被種類繁多的自動車床所取代，諸如自動仿形車床，六角車床和自動螺絲車床?，F(xiàn)在，設計人員已經熟知先利用單刃刀具去除大量的金屬余量，然后利用成型刀具獲得表面光潔度和精度這種加工方法的優點。這種加工方法的生產速度與現在工廠中使用的最快的加工設備的速度相等。
普通車床的加工偏差主要依賴于操作者的技術熟練程度。設計工程師應該認真地確定由熟練工人在普通車床上加工的試驗零件的公差。在把試驗零件重新設計為生產零件時，應該選用經濟的公差。
對生產加工設備來說，目前比過去更著重評價其是否具有精確的和快速的重復加工能力。應用這個標準來評價具體的加工方法，六角車床可以獲得較高的質量評定。
在為小批量的零件(100—200件)設計加工方法時，采用六角車床是最經濟的。為了在六角車床上獲得盡可能小的公差值，設計人員應該盡量將加工工序的數目減至最少。
自動螺絲車床通常被分為以下幾種類型：?jiǎn)屋S自動、多軸自動和自動夾緊車床。自動螺絲車床最初是被用來對螺釘和類似的帶有螺紋的零件進行自動化和快速加工的。但是，這種車床的用途早就超過了這個狹窄的范圍?，F(xiàn)在，它在許多種類的精密零件的大批量生產中起著重要的作用。工件的數量對采用自動螺絲車床所加工的零件的經濟性有較大的影響。如果工件的數量少于1 000件，在六角車床上進行加工比在自動螺絲車床上加工要經濟得多。如果計算出最小經濟批量，并且針對工件批量正確地選擇機床，就會降低零件的加工成本。
因?yàn)榱慵谋砻娲植诙仍诤艽蟪潭壬先Q于工件材料、刀具、進給量和切削速度，采用自動仿形車床加工所得到的最小公差不一定是最經濟的公差。
在某些情況下，在連續生產過程中，只進行一次切削加工時的公差可以達到±0．05mm。對于某些零件，槽寬的公差可以達到±0．125mm。鏜孔和采用單刃刀具進行精加工時，公差可達到±0．0125mm。在希望獲得最大產量的大批量生產中，進行直徑和長度的車削時的最小公差值為土0．125mm是經濟的。
金屬切削加工在制造業中得到了廣泛的應用。其特點是工件在加工前具有足夠大的尺寸，可以將工件最終的幾何形狀尺寸包容在里面。不需要的材料以切屑、顆粒等形式被去除掉。去除切屑是獲得所要求的工件幾何形狀，尺寸公差和表面質量的必要手段。切屑量多少不一，可能占加工前工件體積的百分之幾到70％—80％不等。
由于在金屬切削加工中，材料的利用率相當?shù)停又A(yù)測到材料和能源的短缺以及成本的增加，最近十年來，金屬成形加工的應用越來越多。然而，由于金屬成形加工的模具成本和設備成本仍然很高，因此盡管金屬切削加工的材料消耗較高，在許多情況下，它們?nèi)匀皇亲罱?jīng)濟的。由此可以預料，在最近幾年內，金屬切削加工在制造業中仍將占有重要的位置。而且，金屬切削加工的自動生產系統的發展要比金屬成形加工的自動生產系統的發展要快得多。
在金屬切削加工中，信息的傳遞是通過剛性傳遞介質(刀具)實現的。刀具相對工件運動，機械能通過刀具作用于工件。因此，刀具的幾何形狀和刀具與工件的運動方式?jīng)Q定了工件的最終形狀。這個基本過程是機械過程：實際上是一個剪切與斷裂相結合的過程。
如前所述，在金屬切削加工中，多余的材料由剛性刀具切除，以獲取需要的幾何形狀、公差和表面光潔度。屬于此類加工方法的例子有車削、鉆削、鉸孔、銑削、牛頭刨削、龍門刨削、拉削、磨削、珩磨和研磨。
大多數切削加工(或稱機械加工)過程是以兩維表面成形法為基礎的。也就是說，刀具與工件材料之間需要兩種相對運動。一種定義為主運動(決定切削速度)，另一種定義為進給運動(向切削區提供新的加工材料)。
車削時，工件的回轉運動是主運動；龍門刨床刨削時，工作臺的直線運動是主運動。車削時，刀具連續的直線運動是進給運動；而在龍門刨床刨削中，刀具間歇的直線運動是進給運動。
切削速度v是主運動中刀具(在切削刃的指定點)相對工件的瞬時速度。車削、鉆削和銑削等加工方法的切削速度可以用下式表示：
V= m／min
式中v為切削速度，其單位為m／min；d是工件上將要切削部分的直徑，其單位為m；n是工件或主軸的轉速，單位為rev／min。根據具體運動方式不同，v、d和n可能與加工材料或工具有關。在磨削進，切削速度通常以m／s為單位度量。
在主運動之外，當?shù)毒呋蚬ぜ鬟M(jìn)給運動f時，便產生重復的或連續的切屑切除過程，從而形成所要求的加工表面。進給運動可以是間歇的，或者是連續的。進給速度vf定義為在切削刃的某一選定點上，進給運動要對于工件的瞬時速度。
對于車削和鉆削，進給量f以工件或刀具每轉的相對移動量(mm／rev)來表示；對于龍門刨削和牛頭刨削，進給量f以刀具或工件每次行程的相對移動量(mm／stroke)來表示。對于銑削，以刀具的每齒進給量fz (mm／tooth)來表示，fz是相鄰兩齒間工件的移動距離。所以，工作臺的進給速度vf (mm／min)是刀具齒數z，刀具每分鐘轉數n與每齒進給量人的乘積(vf=nzfz)。
包含主運動方向和進給運動方向的平面被定義為工作平面，因?yàn)樵撈矫姘瑳Q定切削作用的兩種基本運動。
車削時的切削深度α(有時也被稱為背吃刀量)是刀具切削刃切進或深人工件表面內的距離。切削深度決定工件的最終尺寸。在車削加工中采用軸向進給時，切削深度可以通過直接測量工件半徑的減少量來確定；在車削加工中采用徑向進給時，切削深度等于工件長度的減少量。在鉆削中，切削深度等于鉆頭直徑。對于銑削，切削深度定義為側吃刀量αe，它等于銑刀徑向吃刀深度，而銑刀軸向吃刀深度(背吃刀量)被稱為αp。
未變形狀態時的切屑厚度h，就是在垂直于切削方向的平面內垂直于切削刃測量得到的切屑厚度。切削后的切屑厚度(即切屑實際厚度h2 )大于未變形時的切屑厚度，也就是說切削比或者切屑厚度比r=h1/h2總是小于1。 ‘
未變形狀態的切屑寬度b，是在與切削方向垂直的平面內沿切削刃測得的切屑寬度。
對于單刃刀具切削加工，切削面積A是未變形的切屑厚度h1和切屑寬度b的乘積(即A=h1b)。切削面積也可以用進給量f和切削深度α表示如下：
H1=fsink 及 b=a／sink
式中x為主偏角(即切削刃與工作平面形成的夾角)。
因此，可以由下式求出切削面積
A=fa
附錄2：
Lathes And It’s Cutting Process
Lathes are machine tools designed primarily to do turning, facing,and boring. Very little turning is done on other types of machine tools,and none can do it with equal facility. Because lathes also can do drilling and reaming, their versatility permits several operations to be done with a single setup of the workpiece. Consequently, more lathes of various types are used in manufacturing than any other machine tool.
The essential components of a lathe are the bed, headstock assembly, tailstock assembly, carriage assembly, and the leadscrew and feed rod.
The bed is the backbone of a lathe. It usually is made of well-
normalized or aged gray or nodular cast iron and provides a heavy, rigid
frame on which all the other basic components are mounted. Two sets of parallel, longitudinal ways, inner and outer, are contained on the bed, usually on the upper side. Some makers use an inverted V-shape for all four ways, whereas others utilize one inverted V and one fiat way in one or both sets. They are precision-machined to assure accuracy of alignment. On most modem lathes the ways are surface-hardened to resist wear and abrasion, but precaution should be taken in operating a lathe to assure that the ways are not damaged. Any inaccuracy in them usually means that the accuracy of the entire lathe is destroyed.
The headstock is mounted in a fixed position on the inner ways,usually at the left end of the bed. It provides a powered means of rotating the work at various speeds. Essentially, it consists of a hollow spindle, mounted in accurate bearings, and a set of transmission gears--similar to a truck transmission--through which the spindle can be rotated at a number of speeds. Most lathes provide from 8 to 18 speeds, usually in a geometric ratio, and on modem lathes all the speeds can be obtained merely by moving from two to four levers. An increasing trend is to provide a continuously variable speed range through electrical or mechanical drives.
Because the accuracy of a lathe is greatly dependent on the spindle, it is of heavy construction and mounted in heavy beatings, usually
preloaded tapered roller or ball types. The spindle has a hole extending through its length, through which long bar stock can be fed. The size d this hole is an important dimension of a lathe because it detemtines the maximum size of bar stock that can be machined when the material must be fed through spindle.
The tailstock assembly consists, essentially, of three parts. A lower casting fits on the inner ways of the bed and can slide longitudinally thereon, with a means for clamping the entire assembly in any desired location. An upper casting fits on the lower one and can be movedtransversely upon it, on some type of keyed ways, to permit aligning the tailstock and headstock spindles. The third major component of the assembly is the tailstock quill. This is a hollow steel cylinder, usually about 51 to 76 mm (2 to 3 inches) in diameter, that can be moved several inches longitudinally in and out of the upper casting by means of a handwheel and screw.
The size of a lathe is designated by two dimensions. The first is known as the swing. This is the maximum diameter of work that can be rotated on a lathe. It is approximately twice the distance between the line connecting the lathe centers and the nearest point on the ways. The second size dimension is the maximum distance between centers. The swing thus indicates the maximum workpiece diameter that can be turned in the lathe, while the distance between centers indicates the maximum length of workpieee that can be mounted between centers.
Engine lathes are the type most frequently used in manufacturing. llley are heavy-duty machine tools with all the components described previously and have power drive for all tool movements except on the compound rest. They commonly range in size from 305 to 610 mtn ( 12 to 24 inches) swing and from 610 to 1 219 mm (24 to 48 inches) center distances, but swings up to 1 270 mm (50 inches) and center distances up to 3 658 mm ( 12 feet) are not tmcommon. Most have chip pans and a built-in coolant circulating system. Smaller engine lathes--with swings usually not over 330 mm ( 13 inches)--also are available in bench type,designed for the bed to be mounted on a bench or cabinet.
Although engine lathes are versatile and very useful, because of the time required for changing and setting tools and for making measurements on the workpiece, they ale not suitable for quantity production. Often the actual chip-production time is less than 30% of the total cycle time. In addition, a skilled machinist is required for all the operations, and such persons are costly and often in short supply. However, much of the operator's time is consumed by simple, repetitious adjustments and in watching chips being made. Consequently, to reduce or eliminate the amount of skilled labor that is required, turret lathes, screw machines, and other types of semiautomatic and automatic lathes have been highly developed and are widely used in manufacturing.
The engine lathe, one of the oldest metal removal machines, has a number of useful and highly desirable attributes. Today these lathes are used primarily in small shops where smaller quantities rather than large production runs are encountered.
The engine lathe has been replaced in today's production shops by a wide variety of automatic lathes such as automatic tracer lathes, turret lathes, and automatic screw machines. All the advantages of single-point tooling for maximum metal removal, and the use of form tools for finish and accuracy, are now at the designer's fingertips with production speeds on a par with the fastest processing equipment on the scene today.
Tolerances for the engine lathe depend primarily on the skill of the operator. The design engineer must be careful in using tolerances of an experimental part that has been produced on the engine lathe by a skilled operator. In redesigning an experimental part for production, economical tolerances should be used.
Production machining equipment must be evaluated now, more than ever before, in terms of ability to repeat accurately andrapidly. Applying this criterion for establishing the production qualification of a specific method, the turret lathe merits a high rating.
In designing for low quantities such as 100 or 200 parts, it is most economical to use the turret lathe. In achieving the optimum tolerances possible on the turret lathe, the designer should strive for a minimum of operations.
Generally, automatic screw machines fall into several categories; single-spindle automatics, multiple-spindle automatics and automatic chucking machines.Originally designed for rapid, automatic production of screws and similar threaded pans, the automatic screw machine has long since exceeded the confines of this narrow field, and today plays a vital role in the mass production of a variety of precision parts. Quantities play an important pm't in the economy of the parts machined on the automatic screw machine.Quantities less than 1 000 parts may be more economical to set up on the turret lathe than on the automatic screw machine. The cost of the pans machined can be reduced if the minimum economical lot size is calculated and the proper machine is selected for these quantities.
Since surface roughness depends greatly upon material tumed, tooling, and feeds and speeds employed,minimum tolerances that can be held on automatic tracer lathes are not necessarily the most economical tolerances.
In some cases, tolerances of ±0.05mm are held in continuous production using but one cut. Groove width can be held to ± 0.125mm on some parts. Bores and single-point finishes can be held to ±0.0125mm. On high-production runs where maximum output is desirable, a minimmn tolerance of ± 0. 125mm is economical on both diameter and length of turn.
Metal-cutting processes are extensively used in the manufacturing industry. They are characterized by the fact that the size of the original workpieee is sufficiently large that the final geometry can be circumscribed by it, and that the unwanted material is removed as chips, particles, and so on. The chips are a necessary means to obtain the desired tolerances, and surfaces. The amount of scrap may vary from a few percent to 70% - 80% of the volume of the original work material.
Owing to the rather poor material utilization of the metal-cutting processes, the anticipated scarcity of materials and energy,and increasing costs, the development in the last decade has been directed toward an increasing application of metal-forming processes. However, die costs and the capital cost of machines remain rather high; consequently, metal-cutting processes are, in many cases, the most economical, in spite of the high material waste, which only has value as scrap. Therefore,it must be expected that the material removal processes will for the next few years maintain their important position in manufacturing.Furthermore,the development of automated production systems has progressed more rapidly for metal-cutting processes than for metal-forming processes.
In metal-cutting processes, the imprinting of information is carried out by a rigid medium of transfer (the tool), which is moved relative to the workpiece, and the mechanical energy is supplied through the tool. The final geometry is thus determined from the geometry of the tool and the pattem of motions of the tool and the workpiece. The basic process is mechanical: actually, a shearing action combined with fracture.
As mentioned previously, the unwanted material in metal-cutting processes is removed by a rigid cutting tool, so that the desired geometry, tolerances, and surface finish are obtained. Examples of processes in this group are turning, drilling, reaming, milling,shaping, planing, broaching, grinding, honing, and lapping.
Most of the cutting or machining processes are based on a tw, dimensional surface creation, which means that two relative motions are necessary between the cutting tool and the work material. These motions are defined as the primary motion, which mainly determines the cutting speed, and the feed motion, which provides the cutting zone with new material.
In turning the primary motion is provided by the rotation of the workpiece, and in planing it is provided by the translation of the table; in turning the feed motion is a continuous translation of the tool, and in planing it is an intermittent translation of the tool.
The cutting speed v is the instantaneous velocity of the primary motion of the tool relative to the workpieee (at a selected point on the cutting edge).
The cutting speed for turning, drilling, and milling processes can be expressed as
v = dn m/min
Where v is the cutting speed in m/min,d the diameter of the workpiece to be cut in meters, and n the workpiece or spindle rotation in rev/min. Thus v, d, and n may relate to the work material or the tool, depending on the specific kinematic pattern. In grinding the cutting speed is normally measured in m/s.
The feed motion f is provided to the tool or the workpiece and, when added to the primary motion, leads to a repeated or continuous chip removal and the creation of the desired machined surface. The motion may proceed by steps or continuously. The feed speed vf is defined as the instantaneous velocity of the feed motion relative to the workpiece (at a selected point on the cutting edge).
For mining and drilling, the feed f is measured per revolution (mm/rev) of the workpiece or the tool; for planing and shaping f is measured per stroke (mm/stroke) of the tool or the workpiece. In mining the feed is measured per tooth of the cutter fz(mm/tooth); that is, fzis the displacement of the workpiece between the cutting action of two successive teeth. The feed speed vf(mm/rain) of the table is therefore the product of the number of teeth z of the cutter, the revolutions per minute of the cutter n, and the feed per tooth(vf=nzfz).
A plane containing the directions of the primary motion and the feed motion is defined as the working plane, since it contains the motions responsible for the cutting action.
In turning the depth of cut a (sometimes also called back engagement) is the distance that the cutting edge engages or projects below the original surface of the workpiece. The depth of cut determines the final dimensions of the workpiece. In taming, with an axial feed, the depth of cut is a direct measure of the decrease in radius of the workpiece and with radial feed the depth of cut is equal to the decrease in the length of workpiece. In drilling, the depth of cut is equal to the diameter of the drill. For milling, the depth of cut is defined as the working engagement ae and is the radial engagement of the cutter. The axial engagement (back engagement) of the cutter is called ap.
The chip thickness hi in the undeformed state is the thickness of the chip measured perpendicular to the cutting edge and in a plane perpendicular to the direction of cutting. The chip thickness after cutting (i. e., the actual chip thickness h2) is larger than the undeformed chip thickness, which means that the cutting ratio or chip thickness ratio r =h1/h2 is always less than unity.
Chip Width The chip width b in the tmdeformed state is the width of the chip measured along the cutting edge in a plane perpendicular to the direction of cutting.
For single-point too! operations, the area of cut A is the product of the undeformed chip thickness h l and the chip width b (i.e., A = h1b). The area of cut can also be expressed by the feedf and the depth of cut a as follows:
H1=f sink and b = a/sink
Where k is the major cutting edge angle (i. e., the angle that the cutting edge forms with the working plane).
Consequently, the area of cut is given by
A =fa
·11·
收藏