雜交水稻籽粒分選清選機械裝備設計【優秀課程畢業設計含20張CAD圖紙帶開題報告】-jxsj72

雜交水稻籽粒分選清選機械裝備設計

摘  要:雜交水稻工程化制種改變了以前雜交水稻母本于父本間行種植的方式，采用母本與父本混合種植的方式，這就造成了收獲后的種子既有母本又有父本；通過實驗研究分析可得，母本籽粒的長度約6mm左右，而父本籽粒大約11-12mm，根據兩種籽粒的長度的特性的不同，擬設計以窩眼滾輪筒為主要工作部件的清洗機來清選出所需要的母本籽粒。本設計根據當前社會發展需要，自行設計了窩眼滾輪筒，介紹了窩眼滾輪筒國內外研究情況和研究意義。本窩眼滾輪筒重點對分選筒內籽的運動動力學分析，得出了影響籽粒分選的主要因素窩眼分選筒的直徑、角速度及斜置傾角，設計計算了各主要部件所需參數并進行了校核，完成了裝備圖及各主要零件的圖紙設計，進行了自我總結。

關鍵詞: 分選；窩眼筒；動力學分析；推料螺旋

Design Of Grain Scalping Machine

Abstract: Hybrid Rice Seed Production of Hybrid Rice changed the previous inter-row cultivation of the female parent in the way male, female and male parent by way of mixed cultivation, which resulted in the seeds after harvest have both male female parent;analysis can be obtained through experiment, the grain length of about 6mm female parent, while the male seed of about 11-12mm, according to the characteristics of the two grains of different length, to be designed to nest eye roller tube as the main working parts of the washing machine?required to settle the election of the female parent grain.The design based on the current social development, to design a roller tube eye socket, eye socket roller tube introduced the situation and significance of domestic and international research.?The roller tube nest eyes focus on the movement of seed tube sorting dynamic analysis of grains obtained the main factor separating the eye socket diameter tube sorting, angular and oblique angle, design and calculation of the major components required?parameters were checked, completed the plans and major parts and equipment design drawings, were self-summary.

    Keywords: Separation, Indent cylinder, Dynamic analysis；Pusher spiral

目   錄

摘要……………………………………………………………………………………1

關鍵詞…………………………………………………………………………………1

1 前言…………………………………………………………………………………2

2 系統總體方案的確定………………………………………………………………3

   2.1 基本結構……………………………………………………………………3

   2.2 工作原理……………………………………………………………………3

   2.3 系統總體方案設計…………………………………………………………4

3 傳動方案的設計……………………………………………………………………4

3.1 電動機的選擇………………………………………………………………4

4 傳動設計……………………………………………………………………………5

4.1 皮帶輪的設計計算…………………………………………………………5

4.2 滾筒鏈傳動設計計算………………………………………………………6

4.3 攪龍鏈傳動設計和計算……………………………………………………8

5 主要部件的設計計算及校核………………………………………………………9

5.1 窩眼型孔……………………………………………………………………9

5.2 分選滾筒……………………………………………………………………9

5.3  滾筒結構設計……………………………………………………………10

5.4  螺旋攪龍…………………………………………………………………11

5.5  螺旋供料器的轉速………………………………………………………12

5.6  機架………………………………………………………………………12

6  種子籽粒動力學分析……………………………………………………………12

6.1  長粒種子軸向動力學分析………………………………………………12

6.2  長粒種子軸向動力學分析………………………………………………13

7  傳動裝置的運動和動力參數……………………………………………………16

7.1各軸轉速……………………………………………………………………16

7.2各軸的功率…………………………………………………………………16

7.3各軸轉矩……………………………………………………………………16

8  軸的設計校核……………………………………………………………………16

8.1 軸1的設計校核……………………………………………………………16

8.2 軸2的設計校核……………………………………………………………17

8.3重要軸的強度校核…………………………………………………………17

8.4軸承的計算…………………………………………………………………19

8.5軸承載荷校核………………………………………………………………19

9  結論………………………………………………………………………………19

參考文獻 ……………………………………………………………………………21

致謝 …………………………………………………………………………………23

【詳情如下】【需要咨詢購買全套設計請加QQ1459919609】

半圓加強板.dwg

圖紙合計20張.dwg

墊片.dwg

套筒.dwg

小支架.dwg

承種槽.dwg

推料螺旋.dwg

攪龍固定架.dwg

攪龍固定盤.dwg

支承軸.dwg

支承軸2.dwg

支承軸部件.dwg

支架1.dwg

文件清單.txt

雜交水稻籽粒分選清選機械裝備設計.doc

雜交水稻籽粒分選清選機械裝備設計開題論證審批表.doc

滾筒.dwg

環形防漏槽.dwg

目錄.doc

窩眼滾筒裝配圖.dwg

端面擋圈.dwg

箱蓋.dwg

網架.dwg

進料斗.dwg

防堵拔齒.dwg