【機械類畢業論文中英文對照文獻翻譯】CO2激光熔透焊接時工件上及焊縫內光致等離子體體的特性【PDF英文5頁word中文翻譯1149字3頁】【有出處】,機械類畢業論文中英文對照文獻翻譯,PDF英文5頁,word中文翻譯1149字3頁,有出處,機械類,畢業論文,中英文,對照,對比,比照,文獻,翻譯,co2,激光,焊接,工件,焊縫,內光致,等離子體,特性 外文資料翻譯2 激光熔透焊接時工件上及焊縫內光致等離子體體的特性 段愛琴，陳俐，鞏水利 摘要：在此論文中，用一個高速攝像機和一個光學放射監視器來探究激光熔透焊接不銹鋼時光致等離子體的特性。透過光致等離子體光學發散的結果顯示其存在兩個特有頻段，它們分別是100-500HZ和1500-3500HZ。與此同時，光致等離子體和熔池的不斷變化的圖像也顯示了其存在兩個不穩定的頻率段。其中一個不穩定的頻段顯示出焊縫內光致等離子體的特性，它處于167-500HZ之間，另一個不穩定的頻段則位于1500-3500HZ之間，這顯然是由保護氣體引起的。某些因素可能會導致焊縫等離子和保護氣體等離子之間頻率的差異，其中的一個原因就是焊縫內光致等離子體的壓力會慢慢地增長。 關鍵詞：激光焊接，光致等離子體，焊縫，頻段 0 序言 如今，激光焊接 已經廣泛應用于許多領域，例如航空航天零部件的激光焊接 。然而，由于特殊的應用環境它需要更高的焊接質量。尤其是，保證長焊縫或復雜的部件的焊接質量被證明是很難的，因為金屬的激光焊接本身就是一個不穩定的過程。全世界已經有許多關于焊接穩定性的研究。．回顧前面的研究成果，就能看出大部分焊接質量的不穩定是由于不穩定的焊接過程引起的，尤其在激光焊接中，主要的原因就是光致等離子導致焊接穩定性很難控制。 在激光深熔焊接中，光致等離子是一種重要的物理現象。因為焊縫和熔池難以直接觀察，所以大部分關于激光焊接過程的研究都集中于能夠間接地顯示焊縫和熔池運動的光致等離子身上。例如，許多關于光致等離子的研究都通過它的光傳播和聲音傳播來監測焊縫的缺陷。然而，光致等離子的物理性能還沒有引起足夠的重視。例如，焊縫中光致等離子的不穩定頻段是否和被加工工件的相同，焊縫中的光致等離子有怎樣的組成和運動等等。實際上，所有這些基本問題不是很清楚。本文介紹了用高速攝像機和光學放射監視器對激光焊接中光致等離子的研究。 1材料及焊接工藝 在這個研究中，實驗材料是304不銹鋼，厚度為2毫米。激光焊接是利用4kW快速軸流Q型激光實現的．光致等離子體和熔池的圖像是通過帶有精密光學濾波器的幻影V4.1高速相機拍攝到的。激光是通過一個特別的激光監控系統計算獲得的。在整個激光焊接加工過程中氬被用來作為同軸保護氣體。 2結果和討論 在304不銹鋼激光焊接過程中，典型的頻譜由光致等離子體顯示在圖1中。 圖1波長/nm 這表明，光譜成分的范圍大多是400-700納米氬。而較高強度的譜線波長都在400-600納米范圍內。這些結果顯示波動范圍從400納米到600納米的光學發射信號的波動特性可用來描述波動光致等離子體。實驗數據顯示在這個變動范圍的波長的相對強度的發射光的波動具有周期性，并且，已有的研究結果也表明他在一個不穩定的周期中波動?？焖俑道锶~變換 (FFr)技術是一種有用的分析信號頻率的方法，因此在本文中被用來識別焊接工藝的特征頻率。 FFTCO2激光焊接304不銹鋼的光學發射頻譜是圖2。 圖2頻率/HZ Behavior of vapor／plasma within the keyhole and above the workpiece during CO2 laser penetration welding 7 Behavior of vapor／plasma within the keyhole and above the workpiece during CO2 laser penetration welding Duan Aiqin，Chen Li and Gong Shuili 段愛琴，陳俐，鞏水利 Abstract In this paper，a high—speed camera and an optical emission monitor were used to study the behavior of vapor／ plasma during CO2 laser welding of SUS304 stainless stee1．Results of optical emission from vapor~plasma show that two characteristicfrequency bands exist，100—500 Hz and 1 500—3 500 Hz．At the same time，the changing images ofvapor／ plasma and bottom pool also confirm that there are two different fluctuation frequency bands．One of the frequency bands represents the characteristic of vapor~plasma within the keyhole，and it is within 167—500 Hz．Another frequency band is within 1 500—3 500 Hz，and it obviously derives from the shielding gas．Some factors may cause these frequency differences between the keyhole plasma and the shielding gas plasma．One of them is that the vapor~plasma pressure within the keyhole will ncrease slowly． Key words CO2 laser welding，vapor／plasma，keyhole，frequency 0 Intr0ductiOn Nowadays，laser welding has been widely used in many fields，such as laser welding of aerospace compo— nents．However，it needs much higher weld quality be— cause of their applied conditions．Especially，maintaining stability of weld quality for long welds or complex compo— nents proves to be difficult，for laser welding of metal is an inherent unstable process．There have been many studies about welding process stability all over the world．Revie— wing published study results，it can be found that most of weld quality instabilities can be caused by unstable weld— ing processes，especially in CO2 laser welding．The main reason is that vapor／plasma makes stability control diffi— culty[ 一 ． Vapor／plasma is a sort of important physical phenom— enon during laser penetration welding．Because the key— hole and molten pool are difficult to be directly observed， most of studies about laser welding processes concentrated on vapor／plasma，which can indirectly show the movement of the pool and the keyhole[3-41 ．In addition，many stud— ies about vapor／plasma have been relative to monitoring weld imperfection by optical emission and acoustic emis— sion from vapor／plasma．However，physical features of va— por／plasma have not been paid a sufficient attention．For instance，whether the fluctuation frequency of vapor／plas· ma within the keyhole is as same as that above the work- piece，how vapor／plasma within the keyhole forms and e— jects，and so on．In fact，all these fundamental questions are not quite clear． This paper presents the study of vapor／plasma during CO2 laser welding by high—speed camera and optical emis— sion monitor． 1 Materials and welding procedure In this study，the experimental material was SUS304 stainless steel with thickness of 2 mm．The laser welding performed using a 4 kW fast axial flow Q—mode CO2 laser． The images of vapor／plasma and molten pool were cap— tured by a Phantom V4．1 high-speed camera with narrow optical filters．The optical emission was acquired and cal— culated by a special plasma monitoring system．Ar was used as coaxial gas shielding during laser welding process一 Duan Aiqin，Chen Li and Gong Shuili，National Key Laboratory for High Density Beam Processing Technology，Beijing Aeronautical Manufacturing Research Institute，Beijing，100024． E—mail：duan—aiqin@tom．corn(Duan Aiqin) CHINA WELDING Vo1．17 No．4 December 2008 2 Results and discussion During CO2 laser welding of SUS304 stainless steel， the typical spectrum from vapor／plasma is shown in Fig．1．This shows that the spectral components in the range of 400—700 nm are mostly lines of Ar 11．And spec— tral lines with higher intensity are within wavelength 400—— 600 nm．These resuIts show that the fluctl】atinn haracter． 50 000 40 000 皇 30 000 嘗20 000 10 000 O istic of optical emission signals of range from 400 nm to 600 nm can describe fluctuation of vapor／plasma．Experi— mental data had shown that relative intensities of optical e— mission in such range of wavelength fluctuate periodically， and published study results[ also confirmed that it chan． ges at an unstable periodicity． ／— ArⅡ50 5-204 ArⅡ 501．7164，， Ⅱ509 ．05 } Ar |． Ⅱ514．178 _ ● ．IJ ．1 1．1 I ／1 J}4． 1 l L一一I．一^．．卜I ．．J^^ 400 450 500 550 600 650 700 Wavelength／nm Fig．1 Spectrum of CO2 laser welding of stainless steel(Laser power 1 650 W and welding speed 1 m／min) Fast Fourier transform(FFr)technique is an useful method that analyzes frequencies of signals，so it was used for identifying characteristic frequency of welding proces— ses in this paper．F盯spectrum of optical emission during CO2 laser welding of SUS304 stainless steel is given in Fig．2．It is found that the frequency components of vapor／ plasma are quite complex and have not a dominant fre— quency component．However，two characteristic frequency bands exist，one is 100—500 Hz(range A)and the other is 1 500—3 500 Hz(range B)．Infrared(IR：1564 nm)e— inission from the welding process can indirectly reveal the radiation of heat．This radiation mostly comes from vapor／ plasma and molten poo1．Fig．3 is the raw time—dependent 謄g SE+3 ‘茸+3 3K~3 2K43 111+3 ‘I卜2 curve of IR optical emission measured during the same process as Fig．2．This diagram obviously reflects that the IR emission can be separated into fluctuation component and invariable component．It has been known that the heat radiation from molten pool only changes with the size and temperature of molten poo1．And it also has been well demonstrated that，for a stable process，the size and tern- perature of molten pool are almost constant。。 ．So FFT spectrum of IR emission by a 100——6 000 Hz band—-pass filter is mainly correlated to heat radiation from vapor／ plasma，as shown in Fig．4．Both Fig．2 and Fig．4 have almost the same distributions of frequencies．However， their intensities are quite different．For the IR emission， Frequency／Hz Fig．2 FFT spectrum of 400—600 am optical emission from vapor／plasma(Laser power 1 650 W and welding speed 1 m／min) ∞ 一 一 審_f0 Behavior of vapor／plasma within the keyhole and ab。ve the workpiece during CO 2 laser penetration welding 9 ； { 蚤I { 。 ………… ， | …… ～l ～’ … 一一■…一一… 一…一 } f Sample position Fig·3 Time dependence of IR emission from vapor／plasma(Laser power 1 650 W and welding speed 1 m／min) Frequency／Hz Fig·4 FFT spectrum of IR emission from vapor／plasma(Laser power l 650 W and welding speed 1 m／min1 intensity within the range A(100—500 rlz)is two times as strong as that within the range B(1 500—3 500 Hz)．But for 400—600 nm optical emission ，intensity within the range A is nearly the same as that within the range B．It can be concluded that there are two different processes and their fluctuation frequencies are within the range A and B respectively．The process correlated with the range A has obvious heat effect，but the process correlated with the range B shows obviously irradiance phenomenon． Two kinds of vapor／plasmas were observed above the workpieee through the high—speed camera with a narrow (a)Two kinds of vapor／plasmas filter．Their fluctuation frequencies are obviouslv differ— ent．Fig．5 shows several typical images of two kinds of va． por／plasmas．Fig．5a presents simultaneously two vapor／ plasmas，C area is Ar plasma image and D area is vapor／ plasma image from the keyhole ．But in Fig．5b．there is only the Ar plasma to be discovered ．However．in Fig．5c，the Ar plasma completely disappears and only the vapor／plasma from the keyhole is observed ．Therefore it could be thought that vapor／plasmas consist of two differ— ent parts deriving from the keyhole and shielding gas re— spectively．Compared with the results of optical emission ， (b)Ar plasma (C)Keyhole vapodplasma Fig·5 Different states of the vapor／plasmas(Laser power 1 650 W and welding speed 1 m／min 1 皇 0葛一0 0 占一∞ ∞葛一 A1 一0 CHINA WELDING Vo1．1 7 No．4 December 2008 the two different frequency range A and B are obviously caused by these two different vapor／plasmas．The follow— ing question is which characteristic frequency band repre— sents the vapor／plasma within the keyhole． Changing images of vapor／plasma are shown in Fig．6．One of typical fluctuating period is from 1 Ills to 5 ms，and another process is from 5 IIIS to 8 ms．In each fluctuating period，the vapor／plasma within the keyhole e jects and then disappears gradually．Frequency of the va— D【】r／plasma from the keyhole iS within 1 67—500 Hz．This can also be revealed by images of bottom pool in penetra’ tion welding process．shown in Fig．7．It can be found that the vapor／plasma starts to eject from the bottom pool f t=l ms)，and then gradually decrease until disappearance(t 3 ms)．The next image(t=4 ins)clearly shows that the Vapor／plasma occurs again．And this process repeats again and again during whole welding process．The statistical data show that fluctuation frequency of the vapor／plasma from the keyhole is within 167—500 Hz，just as same as the results of optical emission． =1 ms t=2InS t=3ms t=4ms t=5InS t=6mS t=7ms f=8ms ￡=9IllS 拄10ms Fig．6 Changing images of vapor／plasma above the weld(Laser power 1 650 W and welding speed 1 m／min) 扛l ms t=2IllS f=3 Ills t=4ms ￡=6ms t=7ms t=8ms t=9Ills t=3ms — Fig．7 Changing images of bottom pool(Laser power 1 650 W and welding speed 1 m／rain) l0 HIS Behavior of vapor／plasma within the keyhole and above the workpiece during CO2 laser penetration welding ll The physical process associated with frequency of the range B has been discussed in the other article 。which showed the features of vapor／plasma arising from the shiel— ding gas above the workpiece． The fluctuation frequency of the vapor／plasma within the keyhole is different from the shielding gas plasma a— bove the workpieee．The reason is mainly that formation of these two kinds of vapor／plasmas are quite different．The shielding gas plasma is caused by the process，which gas is heated to high temperature and then ionizes rapidly． When its pressure reaches to a certain value，the plasma will explode and then disappear rapidly．However，the formation of the vapor／plasma within the keyhole is quite different．While laser beam acts on workpiece，vaporiza— tion will generate within the keyhole；then the vapor is heated to temperature higher than the boiling point；finally heated vapor explodes and ejects from both top and bottom 0f the weld under the condition of full—penetration weld— ing．According to forming principle of two kinds of vapor／ plasmas during full—penetration welding，three factors may cause these．Firstly，because of existence of bottom key— hole，the pressure of the vapor／plasma within the keyhole will increase slowly．Most vapor／plasma within the key— hole comes from vaporization of base metal，but most shielding gas plasma derives from shielding gas heated and ionized directly．Finally，higher vaporization pressure can be remained in the keyhole，but shielding gas plasma is in free and explodes at lower pressure． 3 Conclusions For CO，laser welding of SUS304 stainless steel， some conclusions about vapor／plasma are as follows： (1)The spectrum shows that the spectral components in the range of400—700 nm are mostly lines ofArⅡ．a(chǎn)nd most intense spectral lines are within 400—600 nm． (2)The study of optical emission from vapor／plas— ma，both for 400—600 nm and IR emission，shows that the frequency components of the vapor／plasma are quite complex and have not a dominant frequency component． However，two characteristic frequency bands exist，one is 100—500 Hz and the other is 1 500—3 500 Hz．The process correlated with 100——500 Hz frequency component has obvious heat effect． (3)Changing images of vapor／plasma and bottom pool captured by high speed camera confirm that there are two kinds of vapor／plasmas．And their fluctuation frequen- ties are obviously different．These vapor／plasmas derive from the keyhole and shielding gas respectively．The sta— tistical data show that fluctuation frequency of the vapor／ plasma in the keyhole is within 1 67—500 Hz，just as same as the resuhs of optical emission． References [1] Zhang X D．Mechanism and prevention of process instability in CO2 laser welding．Beijing：Tsinghua University，1997．(in Chinese) [2]Duley W W．Laser welding．New York：John Wiley&Sons Inc．，1998． [3]Aalderink B J，Aarts R G K M，Jonker J B，et a1．Study of the optical emission during Nd：YAG laser welding of AA5182．Congress Proceedings ICALEO，San Francisco， California，USA，October 4—7，2004：11—22． [4] Naito Y．Penetration characteristics in YAG laser and TIG arc hybrid welding，and arc and plasma／plume behavior during welding．Proceeding of Welding Association，2006，24(1)： 32—38． [5]Duan A Q，Chen L．Dynamic behavior of plasma in CO2 laser welding of stainless stee1．Transactions of the China Welding Institution，2005，26(11)：17—20．(in Chinese) [6]Duan A Q，Chen L．Molten pool and temperature field in CO2 laser welding．China Welding，2006，15(1)：30—33．