購買設計請充值后下載，，資源目錄下的文件所見即所得，都可以點開預覽，，資料完整，充值下載可得到資源目錄里的所有文件。。?！咀ⅰ浚篸wg后綴為CAD圖紙，doc,docx為WORD文檔，原稿無水印，可編輯。。。具體請見文件預覽，有不明白之處，可咨詢QQ:12401814
銅片沖壓成形工藝及模具設計
摘 要
本設計題目為銅片沖壓成形工藝及模具設計。通過對該零件模具的設計，進一步加強了設計者沖壓模設計的基礎知識，為設計更復雜的沖壓模具做好了鋪墊和吸取了更深刻的經驗。
本設計運用沖壓成形工藝及模具設計的基礎知識，介紹了模具設計時要注意的要點，并較多的考慮了模具結構的調整性、易更換性及模具成本。從控制制件尺寸精度出發，對銅片沖壓成型工藝及模具的各主要尺寸進行了理論計算，以確定各工作零件的尺寸，從模具設計到零部件的加工工藝以及裝配工藝等進行詳細的闡述，并應用CAD進行各重要零件的設計。
關鍵詞：沖壓模 工藝分析 模具結構
Copper stamping forming process and die design
? Abstract
The design forming the subject for the copper stamping process and die design. Parts of the mold is through the design, designers have further strengthened the basis for stamping die design knowledge, for the design of more complex stamping die to do a good job of paving the way and draw a more profound experience.
The design is use of punch forming process and is die design of the basic knowledge on the mold design to the main points of attention and more consideration of the mold structure, and easy to replace and the cost of mold. Size precision parts from the control, the shape of the copper stamping process and die size of all the major theoretical calculations carried out to determine the size of the working parts, the parts from the mold design process and the assembly are process in detail, etc. and the application of CAD for the design of the important parts.
Keywords: stamping die， mold structure， Process Analysis