【溫馨提示】壓縮包內含CAD圖有下方大圖片預覽，下拉即可直觀呈現眼前查看、盡收眼底縱觀。打包內容里dwg后綴的文件為CAD圖，可編輯，無水印，高清圖，壓縮包內文檔可直接點開預覽，需要原稿請自助充值下載，所見才能所得，請見壓縮包內的文件及下方預覽，請細心查看有疑問可以咨詢QQ：11970985或197216396
摘 要
苗木在我們的日常生活中隨處可見，但是用于修剪苗木的機械往往十分笨重，工人的勞動量很大。因此我們迫切需要一種可以修剪多種造型苗木的手推式苗木修剪機。
為了完成本次設計工作，首先確定手推式苗木修剪機的重要結構，然后分別設計和計算包括液壓系統在內的重要零部件。
本文的創新點主要有：⒈運用creo軟件對修剪車進行三維建模，并機械有限源分析，對結構進行優化2.運用液壓升降機構，使修剪的高度可以自動調節；3.為了使修剪機的修剪高度可以得到調節，在機體的支撐架用到了齒輪齒條傳動；4.為了使修剪的寬度范圍得到調節，修剪的籬刀可以左右移動； 5.籬刀的可以調整三個角度，能夠修剪更多造型的苗木；
關鍵詞：苗木修剪機；結構設計；有限元分析；creo；液壓系統
Abstract
Nursery stock can be seen everywhere in our daily life, but the machinery used to prune seedlings is often very cumbersome and the workers are very productive. Therefore, we urgently need a kind of hand - pushing pruning machine for pruning seedlings.
In order to complete the design work, the important structure of hand type seedling pruning machine is firstly determined, then the important parts, including hydraulic system, are designed and calculated respectively.
The main innovations of this paper are: 1. Using 3D modeling creo software of trim car, and machinery Limited source analysis, optimize the use of the 2 hydraulic lifting mechanism on the structure, which can automatically adjust the height of pruning; 3 in order to make the mower mowing height can be adjusted, in the body of the support frame used in gear rack transmission in order to make the adjustment; 4 trim width, Hedgerow pruning knife can move around; 5 hedge knife can be adjusted from three angles, can trim more seedlings;
Key words: Seedling pruning machine; structure design; finite element analysis; creo; hydraulic system
2