【溫馨提示】 dwg后綴的文件為CAD圖，可編輯，無水印，高清圖，，壓縮包內文檔可直接點開預覽，需要原稿請自助充值下載，請見壓縮包內的文件及預覽，所見才能所得，請細心查看有疑問可以咨詢QQ：414951605或1304139763
工業型煤成型機的設計
摘要
本論文描述了GDC955/45對輥成型機的設計和計算過程，并對關鍵部位進行了分析和研究。
工業對輥成型機是一種應用到型煤生產中的關鍵設備，屬于工程機械。對輥成型機是由壓輥、軸承、給料系統、承壓支架、減速器（傳動裝置）、潤滑系統、等機構組成。與傳統低速重載、剛性不足的老式減速器相比，它具有體積小、重量輕、成本低廉等優點。
對輥組件直接關系到型煤煤球的成球質量，工業型煤是一種廣泛應用到冶金、制造化肥、電廠等工業領域、對節能、環保都具有重要意義的清潔、高效的新型燃料。本設計在對輥輥輪與對輥軸之間采用脹套無鍵連接技術，兩對對輥輥輪之間必須具有良好的對中性，否則會影響成型質量。采用脹套無鍵連接的優點是可以方便的松開脹套對輥輪進行調整，保證型煤的成球率。
在給料系統中，本裝置采用了螺旋強迫加料裝置，采用此裝置可滿足對輥成型機對加料速度，加料壓力及物料密度的匹配要求大大提高了型煤的成球強度。
本設計機架采用螺桿連接結構，此種機架制作簡便，而且承載能力強，拆裝方便，基本滿足大型對輥成型機的工作要求。
關鍵詞：對輥成型機；工業型煤；螺旋加料；液壓加載
ABSTRACT
The process of the design and calculations GDC955/45 roll-type forming machine is described, and the crucial units are analyzed and investigated.
Industry roll-type forming machine is a crucial device applied to the manufacturing of shape-coal. It’s a kind of engineering machine. Roll-type machine consists of units such as pressing rolls, bearing, feeding system, bearing beam ,three-staged velocity-reduction gearbox (transmission system), lubricating system, and hydraulic pressing system, etc .compared conventional forming machine ,with heavy-burden and inadequate rigidity, it is of small-volume,;low-weight and low-cost.
Double rolls have a direct relation to the forming-quality of shape-coal. Industry shape-coal is a new-type of clean ,effective fuel which is widely applied to various industry field such as metallurgical industry ,manufacturing industry chemical fertilizer, calcium carbide and has a vital significance to energys-aving and environment-protection business.
Design in the paper uses expanded–casing and no-key connecting technology and it must be guaranteed that it must be of good centering character-
istic betwween ball groves of the two rolls. Otherwise the forming quality will be
seriously affected. Use expanded-casing and no-key connecting technology, rolls can can be conveniently adjusted by loosning expanded-casing to ensure the forming rate of shape coal.
In the feeding system, the frequency conversion-timinghelix feeding equipment is adopted in the system which can satisfy the requriements of speed of filing the press of the feeding and the match of the material. So ,it can also improve the intensity of the figuration of the briquette.
Design of structure uses construction of pressing rolls which can be easily removed or easily altered. This kind of structure is of simple-make and bear heavy loads. Hence,the working requirements os large scale roll-type forming maching are satisfied.
Keywords: roll-rype forming machine; industry shape-coal; thefrequency conversion-timing helix feeding system; hydraulic loading .
目 錄
第１章 總述…………………………………………………...1
1.1 對輥成型機的工作原理 1
1.2 影響型煤成型的因素 3
1.2.1 粉煤粒度、給配對粉煤成型的影響 3
1.2.2 原料混合后的均勻性與攪拌時間的影響 4
1.2.3 成型的壓力 4
1.2.4 成型過程中水分含量的影響 5
1.2.5 壓輥的直徑和寬度 6
1.2.6 兩個壓輥的間距 6
1.2.7 壓輥的轉速 6
1.3型輪主要參數設計理論 6
1.3.1 最大壓強 7
1.3.2 兩棍輪的間隙 7
1.3.3 棍輪直徑 8
1.3.4 生產能力計算 8
1.3.5 功率的計算 8
1.4高壓對輥成型機的設計及其新進展 9
1.4.1 壓輥 9
1.4.2 壓輥的支撐裝置 10
1.4.3 給料系統 11
1.4.4 承壓支架 13
1.4.5 驅動齒輪系 14
1.4.6 潤滑 14
1.4.7 液壓施壓系統 14
第２章對輥成型機的設計過程...........................................................................15
2.1 確定傳動方案 15
2.2 總體設計 16
2.2.1 已知主要參數 16
2.2.2 確定輥?zhàn)拥某叽鐓?shù) 17
2.2.3 總壓力計算 18
2.2.4 輥?zhàn)拥尿?qū)動力矩計算 19
2.2.5 主電機功率計算 19
2.3 非標準同步減速器的設計 20
2.3.1 傳動比的分配 20
2.3.2 帶傳動設計 21
2.4 同步減速器設計 24
2.4.1 減速器的設計要求 24
2.4.2 各級傳動參數計算 25
2.4.3 I級傳動輪齒副設計計算 26
2.4.4 Ⅱ級傳動輪齒副設計計算 31
2.4.5 Ⅲ級傳動輪齒副設計計算 37
2.4.6 減速器輸入軸的設計和校核 41
2.4.7 減速器輸出軸的設計和校核 50
2.4.8 型輥軸的結構設計 60
2.4.9 軸的強度校核 61
第３章成型機其他部分的設計………………………………………………...66
3.1型板材料的選擇 66
3.2液力加載系統分析 67
3.2.1 液力加載系統的特征 67
3.2.2 液力加載系統原理 67
3.2.3 液力支撐油缸 68
3.2.4 力加載系統受力動態分析 69
3.3關鍵部位設計 71
參考文獻…………………………………………………………………………………...72
翻譯部分………………………………………………………………………...74
致謝……………………………………………………………………………...85