【溫馨提示】壓縮包內含CAD圖有預覽點開可看。打包內容里dwg后綴的文件為CAD圖，可編輯，無水印，高清圖，壓縮包內文檔可直接點開預覽，需要原稿請自助充值下載，所見才能所得，請細心查看有疑問可以咨詢QQ：11970985或197216396
南京理工大學泰州科技學院
畢業設計(論文)外文資料翻譯
系 部： 機械工程系
專 業： 機械工程及自動化
姓 名： 黃凱
學 號： 0501510122
(用外文寫)
外文出處： CNC Machine Tool Geometric Error and its Compensation Method
附 件： 1.外文資料翻譯譯文；2.外文原文。
指導教師評語：此翻譯文章詳細描述了數控技術的發展，翻譯用詞基本準確，文筆也較為通順，具備一定的英語基礎，為在以后工作中接觸英文資料打下了基礎。
簽名：
年 月 日
注：請將該封面與附件裝訂成冊。
附件1：外文資料翻譯譯文
數控技術的發展
1、數控系統發展簡史及趨勢
1946年誕生了世界上第一臺電子計算機，這表明人類創造了可增強和部分代替腦力勞動的工具。它與人類在農業、工業社會中創造的那些只是增強體力勞動的工具相比，起了質的飛躍，為人類進入信息社會奠定了基礎。
1.1、數控（NC）階段 早期計算機的運算速度低，對當時的科學計算和數據處理影響還不大，但不能適應機床實時控制的要求。人們不得不采用數字邏輯電路“搭”成一臺機床專用計算機作一、數控系統發展簡史及趨勢
1946年誕生了世界上第一臺電子計算機，這表明人類創造了可增強和部分代替腦力勞動的工具。它與人類在農業、工業社會中創造的那些只是增強體力勞動的工具相比，起了質的飛躍，為人類進入信息社會奠定了基礎1.1、數控（NC）階段（1952～1970年）早期計算機的運算速度低，對當時的科學計算和數據處理影響還不大，但不能適應機床實時控制的要求。人們不得不采為數控系統，被稱為硬件連接數控（HARD-WIRED NC），簡稱為數控（NC）。隨著元器件的發展，這個階段歷經1952年的第一代－－電子管；1959年的第二代－－晶體管；1965年的第三代－－小規模集成電路。
1.2、計算機數控（CNC）階段（1970年～現在）
到1970年，通用小型計算機業已出現并成批生產。于是將它移植過來作為數控系統的核心部件，從此進入了計算機數控（CNC）階段（把計算機前面應有的“通用”兩個字省略了）。到1971年，美國INTEL公司在世界上第一次將計算機的兩個最核心的部件－－運算器和控制器，采用大規模集成電路技術集成在一塊芯片上，稱之為微處理器（MICROPROCESSOR），又可稱為中央處理單元（簡稱CPU）。
到1974年微處理器被應用于數控系統。這是因為小型計算機功能太強，控制一臺機床能力有富裕（故當時曾用于控制多臺機床，稱之為群控），不如采用微處理器經濟合理。而且當時的小型機可靠性也不理想。早期的微處理器速度和功能雖還不夠高，但可以通過多處理器結構來解決。由于微處理器是通用計算機的核心部件，故仍稱為計算機數控。
到了1990年，PC機（個人計算機，國內習慣稱微機）的性能已發展到很高的階段，可以滿足作為數控系統核心部件的要求。數控系統從此進入了基于PC的階段。
總之，計算機數控階段也經歷了三代。即1970年的第四代－－小型計算機；1974年的第五代－－微處理器和1990年的第六代－－基于PC（國外稱為PC-BASED）。
還要指出的是，雖然國外早已改稱為計算機數控（即CNC）了，而我國仍習慣稱數控（NC）。所以我們?nèi)粘Ｖv的“數控”，實質上已是指“計算機數控”了。
1.3、數控未來發展的趨勢
1.3.1 繼續向開放式、基于PC的第六代方向發展
基于PC所具有的開放性、低成本、高可靠性、軟硬件資源豐富等特點，更多的數控系統生產廠家會走上這條道路。至少采用PC機作為它的前端機，來處理人機界面、編程、聯網通信等問題，由原有的系統承擔數控的任務。PC機所具有的友好的人機界面，將普及到所有的數控系統。遠程通訊，遠程診斷和維修將更加普遍。
1.3.2 向高速化和高精度化發展
這是適應機床向高速和高精度方向發展的需要。
1.3.3 向智能化方向發展
隨著人工智能在計算機領域的不斷滲透和發展，數控系統的智能化程度將不斷提高。
（1）應用自適應控制技術
數控系統能檢測過程中一些重要信息，并自動調整系統的有關參數，達到改進系統運行狀態的目的。
（2）引入專家系統指導加工
將熟練工人和專家的經驗，加工的一般規律和特殊規律存入系統中，以工藝參數數據庫為支撐，建立具有人工智能的專家系統。
（3）引入故障診斷專家系統
（4）智能化數字伺服驅動裝置
可以通過自動識別負載，而自動調整參數，使驅動系統獲得最佳的運行。
2、機床數控化改造的必要性
2.1、微觀看改造的必要性
從微觀上看，數控機床比傳統機床有以下突出的優越性，而且這些優越性均來自數控系統所包含的計算機的威力。
2.1.1 可以加工出傳統機床加工不出來的曲線、曲面等復雜的零件。
由于計算機有高超的運算能力，可以瞬時準確地計算出每個坐標軸瞬時應該運動的運動量，因此可以復合成復雜的曲線或曲面。
2.1.2 可以實現加工的自動化，而且是柔性自動化，從而效率可比傳統機床提高3～7倍。
由于計算機有記憶和存儲能力，可以將輸入的程序記住和存儲下來，然后按程序規定的順序自動去執行，從而實現自動化。數控機床只要更換一個程序，就可實現另一工件加工的自動化，從而使單件和小批生產得以自動化，故被稱為實現了“柔性自動化”。
2.1.3 加工零件的精度高，尺寸分散度小，使裝配容易，不再需要“修配”。
2.1.4 可實現多工序的集中，減少零件 在機床間的頻繁搬運。
2.1.5 擁有自動報警、自動監控、自動補償?shù)榷喾N自律功能，因而可實現長時間無人看管加工。
2.1.6 由以上五條派生的好處。
如：降低了工人的勞動強度，節省了勞動力（一個人可以看管多臺機床），減少了工裝，縮短了新產品試制周期和生產周期，可對市場需求作出快速反應等等。
以上這些優越性是前人想象不到的，是一個極為重大的突破。此外，機床數控化還是推行FMC（柔性制造單元）、FMS（柔性制造系統）以及CIMS（計算機集成制造系統）等企業信息化改造的基礎。數控技術已經成為制造業自動化的核心技術和基礎技術。
2.2、宏觀看改造的必要性
從宏觀上看，工業發達國家的軍、民機械工業，在70年代末、80年代初已開始大規模應用數控機床。其本質是，采用信息技術對傳統產業（包括軍、民機械工業）進行技術改造。除在制造過程中采用數控機床、FMC、FMS外，還包括在產品開發中推行CAD、CAE、CAM、虛擬制造以及在生產管理中推行MIS（管理信息系統）、CIMS等等。以及在其生產的產品中增加信息技術，包括人工智能等的含量。由于采用信息技術對國外軍、民機械工業進行深入改造（稱之為信息化），最終使得他們的產品在國際軍品和民品的市場上競爭力大為增強。而我們在信息技術改造傳統產業方面比發達國家約落后20年。如我國機床擁有量中，數控機床的比重（數控化率）到1995年只有1.9%，而日本在1994年已達20.8%，因此每年都有大量機電產品進口。這也就從宏觀上說明了機床數控化改造的必要性。
3、機床與生產線數控化改造的市場
3.1、機床數控化改造的市場
我國目前機床總量380余萬臺，而其中數控機床總數只有11.34萬臺，即我國機床數控化率不到3%。近10年來，我國數控機床年產量約為0.6～0.8萬臺，年產值約為18億元。機床的年產量數控化率為6%。我國機床役齡10年以上的占60%以上；10年以下的機床中，自動/半自動機床不到20%，F(xiàn)MC/FMS等自動化生產線更屈指可數（美國和日本自動和半自動機床占60%以上）。可見我們的大多數制造行業和企業的生產、加工裝備絕大數是傳統的機床，而且半數以上是役齡在10年以上的舊機床。用這種裝備加工出來的產品普遍存在質量差、品種少、檔次低、成本高、供貨期長，從而在國際、國內市場上缺乏競爭力，直接影響一個企業的產品、市場、效益，影響企業的生存和發展。所以必須大力提高機床的數控化率。
3.2、進口設備和生產線的數控化改造市場
我國自改革開放以來，很多企業從國外引進技術、設備和生產線進行技術改造。據不完全統計，從1979～1988年10年間，全國引進技術改造項目就有18446項，大約165.8億美元。
這些項目中，大部分項目為我國的經濟建設發揮了應有的作用。但是有的引進項目由于種種原因，設備或生產線不能正常運轉，甚至癱瘓，使企業的效益受到影響，嚴重的使企業陷入困境。一些設備、生產線從國外引進以后，有的消化吸收不好，備件不全，維護不當，結果運轉不良；有的引進時只注意引進設備、儀器、生產線，忽視軟件、工藝、管理等，造成項目不完整，設備潛力不能發揮；有的甚至不能啟動運行，沒有發揮應有的作用；有的生產線的產品銷路很好，但是因為設備故障不能達產達標；有的因為能耗高、產品合格率低而造成虧損；有的已引進較長時間，需要進行技術更新。種種原因使有的設備不僅沒有創造財富，反而消耗著財富。
這些不能使用的設備、生產線是個包袱，也是一批很大的存量資產，修好了就是財富。只要找出主要的技術難點，解決關鍵技術問題，就可以最小的投資盤活最大的存量資產，爭取到最大的經濟效益和社會效益。這也是一個極大的改造市場。
4、數控化改造的內容及優缺
4.1、國外改造業的興起
在美國、日本和德國等發達國家，它們的機床改造作為新的經濟增長行業，生意盎然，正處在黃金時代。由于機床以及技術的不斷進步，機床改造是個"永恒"的課題。我國的機床改造業，也從老的行業進入到以數控技術為主的新的行業。在美國、日本、德國，用數控技術改造機床和生產線具有廣闊的市場，已形成了機床和生產線數控改造的新的行業。在美國，機床改造業稱為機床再生（Remanufacturing）業。從事再生業的著名公司有：Bertsche工程。美國得寶公司已在中國開辦公司。在日本，機床改造業稱為機床改裝（Retrofitting）業。從事改裝業的著名公司有：大隈工程集團、崗三機械公司、千代田工機公司、野崎工程公司、濱田工程公司、山本工程公司等。
4.2、數控化改造的內容
機床與生產線的數控化改造主要內容有以下幾點：
其一是恢復原功能，對機床、生產線存在的故障部分進行診斷并恢復；
其二是NC化，在普通機床上加數顯裝置，或加數控系統，改造成NC機床、CNC機床；
其三是翻新，為提高精度、效率和自動化程度，對機械、電氣部分進行翻新，對機械部分重新裝配加工，恢復原精度；對其不滿足生產要求的CNC系統以最新CNC進行更新；
其四是技術更新或技術創新，為提高性能或檔次，或為了使用新工藝、新技術，在原有基礎上進行較大規模的技術更新或技術創新，較大幅度地提高水平和檔次的更新改造。
4.3.1 減少投資額、交貨期短
同購置新機床相比，一般可以節省60%～80%的費用，改造費用低。特別是大型、特殊機床尤其明顯。一般大型機床改造，只花新機床購置費用的1/3，交貨期短。但有些特殊情況，如高速主軸、托盤自動交換裝置的制作與安裝過于費工、費錢，往往改造成本提高2～3倍，與購置新機床相比，只能節省投資50%左右。
4.3.2 機械性能穩定可靠，結構受限
所利用的床身、立柱等基礎件都是重而堅固的鑄造構件，而不是那種焊接構件，改造后的機床性能高、質量好，可以作為新設備繼續使用多年。但是受到原來機械結構的限制，不宜做突破性的改造。
4.3.3 熟悉了解設備、便于操作維修
購買新設備時，不了解新設備是否能滿足其加工要求。改造則不然，可以精確地計算出機床的加工能力；另外，由于多年使用，操作者對機床的特性早已了解，在操作使用和維修方面培訓時間短，見效快。改造的機床一安裝好，就可以實現全負荷運轉。
4.3.4 可充分利用現有的條件
可以充分利用現有地基，不必像購入新設備時那樣需重新構筑地基。
4.3.5 可以采用最新的控制技術
可根據技術革新的發展速度，及時地提高生產設備的自動化水平和效率，提高設備質量和檔次，將舊機床改成當今水平的機床。
5、數控系統的選擇
數控系統主要有三種類型，改造時，應根據具體情況進行選擇。
5.1 步進電機拖動的開環系統
該系統的伺服驅動裝置主要是步進電機、功率步進電機、電液脈沖馬達等。由數控系統送出的進給指令脈沖，經驅動電路控制和功率放大后，使步進電機轉動，通過齒輪副與滾珠絲杠副驅動執行部件。只要控制指令脈沖的數量、頻率以及通電順序，便可控制執行部件運動的位移量、速度和運動方向。這種系統不需要將所測得的實際位置和速度反饋到輸入端，故稱之為開環系統，該系統的位移精度主要決定于步進電機的角位移精度，齒輪絲杠等傳動元件的節距精度，所以系統的位移精度較低。
該系統結構簡單，調試維修方便，工作可靠，成本低，易改裝成功。
5.2、異步電動機或直流電機拖動，光柵測量反饋的閉環數控系統
該系統與開環系統的區別是：由光柵、感應同步器等位置檢測裝置測得的實際位置反饋信號，隨時與給定值進行比較，將兩者的差值放大和變換，驅動執行機構，以給定的速度向著消除偏差的方向運動，直到給定位置與反饋的實際位置的差值等于零為止。閉環進給系統在結構上比開環進給系統復雜，成本也高，對環境室溫要求嚴。設計和調試都比開環系統難。但是可以獲得比開環進給系統更高的精度，更快的速度，驅動功率更大的特性指標?？筛鶕?jù)產品技術要求，決定是否采用這種系統。
5.3、交/直流伺服電機拖動，編碼器反饋的半閉環數控系統
半閉環系統檢測元件安裝在中間傳動件上，間接測量執行部件的位置。它只能補償系統環路內部部分元件的誤差，因此，它的精度比閉環系統的精度低，但是它的結構與調試都較閉環系統簡單。在將角位移檢測元件與速度檢測元件和伺服電機作成一個整體時則無需考慮位置檢測裝置的安裝問題。
當前生產數控系統的公司廠家比較多，國外著名公司的如德國SIEMENS公司、日本FANUC公司；國內公司如中國珠峰公司、北京航天機床數控系統集團公司、華中數控公司和沈陽高檔數控國家工程研究中心。
選擇數控系統時主要是根據數控改造后機床要達到的各種精度、驅動電機的功率和用戶的要求。
6、數控改造中主要機械部件改裝探討
一臺新的數控機床，在設計上要達到：有高的靜動態剛度；運動副之間的摩擦系數小，傳動無間隙；功率大；便于操作和維修。機床數控改造時應盡量達到上述要求。不能認為將數控裝置與普通機床連接在一起就達到了數控機床的要求，還應對主要部件進行相應的改造使其達到一定的設計要求，才能獲得預期的改造目的。
6.1、滑動導軌副
對數控車床來說，導軌除應具有普通車床導向精度和工藝性外，還要有良好的耐摩擦、磨損特性，并減少因摩擦阻力而致死區。同時要有足夠的剛度，以減少導軌變形對加工精度的影響，要有合理的導軌防護和潤滑。
6.2、齒輪副
一般機床的齒輪主要集中在主軸箱和變速箱中。為了保證傳動精度，數控機床上使用的齒輪精度等級都比普通機床高。在結構上要能達到無間隙傳動，因而改造時，機床主要齒輪必須滿足數控機床的要求，以保證機床加工精度。
6.3、滑動絲杠與滾珠絲杠
絲杠傳動直接關系到傳動鏈精度。絲杠的選用主要取決于加工件的精度要求和拖動扭矩要求。被加工件精度要求不高時可采用滑動絲杠，但應檢查原絲杠磨損情況，如螺距誤差及螺距累計誤差以及相配螺母間隙。一般情況滑動絲杠應不低于6級，螺母間隙過大則更換螺母。采用滑動絲杠相對滾珠絲杠價格較低，但難以滿足精度較高的零件加工。
滾珠絲杠摩擦損失小，效率高，其傳動效率可在90%以上；精度高，壽命長；啟動力矩和運動時力矩相接近，可以降低電機啟動力矩。因此可滿足較高精度零件加工要求。
6.4、安全防護
必須以安全為前提。在機床改造中要根據實際情況采取相應的措施，切不可忽視。滾珠絲杠副是精密元件，工作時要嚴防灰塵特別是切屑及硬砂粒進入滾道。在縱向絲杠上也可加整體鐵板防護罩。大拖板與滑動導軌接觸的兩端面要密封好，絕對防止硬質顆粒狀的異物進入滑動面損傷導軌。
制定符合中國國情的總體發展戰略，確立與國際接軌的發展道路，對21世紀我國數控技術與產業的發展至關重要。本文在對數控技術和產業發展趨勢的分析，對我國數控領域存在的問題進行研究的基礎上，對21世紀我國數控技術和產業的發展途徑進行了探討，提出了以科技創新為先導，以商品化為主干，以管理和營銷為重點，以技術支持和服務為后盾，堅持可持續發展道路的總體發展戰略。在此基礎上，研究了發展新型數控系統、數控功能部件、數控機床整機等的具體技術途徑。
我們衷心希望，我國科技界、產業界和教育界通力合作，把握好知識經濟給我們帶來的難得機遇，迎接競爭全球化帶來的嚴峻挑戰。
附件2：外文原文（復印件）
Numerical control technology development
Numerical control system develop biref history and trend the first electronic computer in the world borned in 1946, this indicates the mankind has created the tool that can strengthen and replace the mental labour partly . It, and mankind those that create to strengthen tool of manual labor compare among agriculture, industrial society, the qualitative leap has arisen , has established the foundation that the mankind enters the information-intensive society .
6 years later, namely in 1952, the technology of the computer was applied to the lathe , the first numerical control lathe has emerged in U.S.A.. From then on, the traditional lathe had produced the change of the quality. In nearly half a century, numerical control system go through two stage and six development of generation.
The stage of numerical control (NC ) (1952-1970 years) The operation of the early computer is low in speed, influence not also big scientific caculation and data processing at that time, but can't meet the needs of real-time control of the lathe . People have to adopt the digital logical circuit to " put up " and become the special-purpose computer of a lathe as the numerical control system, known as the hardware and connect numerical control (HARD-WIRED NC ) , abbreviate as the numerical control (NC ). With the development of components and parts, does this stage go through you of the sixth of the twelve Earthly Branches? First generation in 952 --Electron tube ; Second generation in 1959 --Transistor; The third generation in 1965 --Small-scale integrated circuit. The stage of numerical control of the computer (CNC ) (1970 - now) By 1970, the small-scale computer industry in common use has already appeared and produced by batch. Then transplant it over as the key part of system of numerical control, enter computer numerical control stage from now on (whether due " in common use two words " omit computer). By 1971, in the world for the first time two central part most of computer Company , INTEL of U.S.A. , --arithmetic unit and controller , adopt the technology intergration of the large scale integrated circuit on a chip, call it microprocessor (MICROPROCESSOR ) , can call central authorities punish Entrance (abbreviate as CPU).
The microprocessor is applied the numerical control system by 1974. This because being function too strong, minicom control one lathe ability have rich (use for controlling many lathes at that time, call it team control ), have more rational economy than the adoption microprocessor. And the minicomputer dependability at that time was unsatisfactory. Early microprocessor speed and function although enough high, can solve through many processor structure. Because the microprocessor is a key part of the all-purpose computer , so still called the numerical control of the computer.
By 1990, the performance of the PC (personal computer , is used to calling the computer at home ) has already developed into very high stage, can meet the demand which is regarded as the key part of the numerical control system . The numerical control system entered the stage based on PC from then on. In a word, the computer went through three generations too at numerical control stage. Namely the fourth generation in 1970 --Minicom ; The fifth generation in 1974 --The microprocessor and the sixth generation of 1990 --Because of PC (call PC-BASED abroad).
The ones that were also wanted and is pointed out are, though has already renamed as the numerical control of the computer (namely CNC ) abroad, and our country is still used to being called the numerical control (NC ). So our daily " numerical control " that speak, has already referred to " the numerical control of the computer " in fact.
Future development trend of numerical control 1. 3. 1 continue to open , based on PC six generation cubic meter to develop Characteristic of enriching on the basis of opening , low cost , high dependability , software and hardware resource that PC has etc., more systematic manufacturers of numerical control will go on this road . Adopt PC as front machine of it , is it deal with man-machine interface , programming , network communication ,etc. problem to come at least, undertaken the task of numerical control by the already existing system. The friendly man-machine interface that the PC has, will run through all numerical control systems. Telecommunication , will diagnose long-rangly and maintain more general.
Develop to high speed and high accuracy This is meeting the need that the lathe is developed in the high-speed and high-accuracy direction.
Develop toward intellectuality With the constant infiltration and development in the field of computer of artificial intelligence, the intelligent degree of the numerical control system will be improved constantly.
1)Use the adaptive control technology Numerical control system can of the detection procedure some important information, and adjust the relevant parameters of the system automatically, achieve the goal of improving systematic operation state.
2)Introduced to the expert system and guided and processedExperienced operator and experience of expert, universal law and special law of processing deposit system, regard parameter database of the craft as support, set up the expert system with artificial intelligence.
3)Introduce the trouble and diagnose the expert system (4)Intelligent digital servo drive Can through discern load automatically , adjust parameter automatically, is it urge system win the best operation to make. Second, necessity 2 of lathe numerical control transformation. 1, Watch the necessity transformed a little Looking from microcosmic, the numerical control lathe has the following and outstanding superiority more than the traditional lathe , and superiority the come from numerical control might of computer system include.
2. 1. 1 can process such complicated parts as the curve coming out in traditional machine tooling , curved surface ,etc. Because computer have superb operation ability, can instantaneous to calculate out each coordinate axis instantaneous amount of exercise that should move accurate, so can compound into the complicated curve or curved surface .
2. 1. 2 can realize automation that process, and flexible automation, thus efficiency raise than the traditional lathe by 3-7 times. Because the computer has memory and stores ability, can remember and store the procedure input , then carry out automatically according to the order that the procedure stipulates , thus realize automation. So long as numerical control lathe changes a procedure , can realize the automation that another work piece is processed , thus make single piece and produce automation of must using in small batches, so known as realizing " flexible automation ".
2. 1. 3 The precision of 3 processing parts is high, the size is dispersed degree small, it is easy to enable assembling, no longer need to " repair the damaged parts of a machine and supply replacements ".
2. 1. 4 concentration that can realize many processes , reduce the frequently carrying among the lathes of part.
2. 1. 5 has such many kinds of self-containment functions as autoalarm , controlling , automatic compensation automatically ,etc., therefore can realize nobody guards and processes for a long time
2. 1. 6 is by the above five spin-off advantages. For instance: Have reduce workers' labour intensity, has saved the workforce (a person can guard many lathes ), reduce frocks, shorten trial production of new products cycle and production cycle , can make fast reaction ,etc. to market demand . The above superiority could not be imagined by forefathers , was an extremely great break-through. In addition, the numerical control of the lathe pursues FMC Foundation in such enterprise's information-based transformations as (flexible manufacturing unit ) , FMS (flexible manufacturing system ) and CIMS (CIMS ) ,etc.. Numerical control technology has already become key technology of automation of manufacturing industry and basic technology.
2. 2, See the necessity transformed in macroscopic Look from macroscopic, the army of the industrially developed country, the people's mechanical industry, by the end of the 70 s, already begin to use the numerical control lathe on a large scale at the beginning of the eighties. Its essence is, adopt the information technology to carry on technological transformation to the traditional industry (including the army , the people's mechanical industry ). Except that adopt the numerical control lathe in the course of making, FMC, outside the FMS , pursue CAD , CAE , CAM , fictitious to make and pursue MIS (the management information system ) , CIMS ,etc. in production management in product development also. And increase the information technology , including the content in artificial intelligence ,etc. in the products that its produce. Adopt information technology carry on the deep transformation to foreign countries army , the people mechanical industry (call it the informationization), make products of them competitiveness strengthen very at international military products and market of civilian goods finally. And we are 20 years for about backwardness than developed country in traditional industry of technological transformation of information. In the owning amount of lathe of our country, there is only 1 by 1995 in the proportion (numerical control rate ) of the numerical control lathe . 9%, and Japan had already been up to 20 in 1994. 8%, so a large number of electronic products are imported every year. This states the necessity of numerical control transformation of the lathe from macroscopic too. Third, the markets of the lathe and production line numerical control transformation 3. 1, Market of numerical control transformation of the lathe The total amount of the lathe at present of our country is more than 3,800,000, and the total amount of numerical control lathes is 11 among them. 340,000, namely the numerical control rate of lathe of our country is less than 3%. In the past 10 years, the annual production of numerical control lathe of our country is about 0. 6-0. 80,000, annual output is about 1,800 million yuan. The annual production numerical control of the lathe turns rate into 6%. To account for more than 60% of our country more than 10 years such as enlistment age such as lathe; In the lathe under 10 years, automatic / semi-automatic lathe is less than 20%, there are very fewer such automatic production lines as FMC/FMS ,etc. (the automatic and semi-automatic lathe of U.S.A. and Japan accounts for more than 60%). It is obvious most manufacturing and production of enterprise of us , is it equip hopeless great number traditional lathe to process, and more than half is the old lathe in above 10 years of enlistment age. Have quality to be poor with the equipment products come out to process variety little of low grade with high costs, thus uncompetitive on world, domestic market, influence products , market , benefit of an enterprise directly, influence the existence and development of enterprises. So must improve the numerical control rate of the lathe in a more cost-effective manner .
3. 2, The numerical control of import equipment and production line transforms the market Our country has introduced the technology , equipment and production line to carry on technological transformation from foreign countries in a lot of enterprises since reform and opening-up. According to incomplete statistics, from 10 year past 1979-1988, the whole country introduce technological transformation project have 18446 items, about 165. 800 million dollars.
In these projects, most projects have played a due role for the economic construction of our country. But some introduce projects for various reasons, equipment or the production line can't run well , even paralysed, make the benefits of enterprises influenced , the serious one makes enterprises get into a difficult position . After some equipment , production line introduce from foreign countries, it is kind for some to digest and assimilate, the spare part is not complete, it is improper to safeguard, the result operates badly ; Some only pay attention to introducing the equipment , instrument , production line while introducing , ignoring software , craft , management ,etc., causing the project to be incomplete, the potentiality of the equipment can't be given play to;
Some can't even start and run , have not given play to the role of should have ing ; Some products of production line sell quickl