【溫馨提示】壓縮包內含CAD圖有下方大圖片預覽，下拉即可直觀呈現眼前查看、盡收眼底縱觀。打包內容里dwg后綴的文件為CAD圖，可編輯，無水印，高清圖，壓縮包內文檔可直接點開預覽，需要原稿請自助充值下載，所見才能所得，請見壓縮包內的文件及下方預覽，請細心查看有疑問可以咨詢QQ：11970985或197216396
本科畢業論文（設計）
翻譯資料
論文題目
某乘用車齒條助力式轉向系統設計
班 級
姓 名
院（系）
導 師
- 12 -
電動助力轉向系統
電動助力轉向系統是什么
電動助力轉向系統是通過一個電動機來驅動動力方向盤液壓泵或直接驅動轉向聯動裝置。電子動力轉向的功能由于不依賴于發動機轉速，所以能節省能源
電動助力轉向系統是怎樣運行的
傳統的動力方向盤系統使用一條引擎輔助傳送帶駕駛泵浦，提供操作在動力方向盤齒輪或作動器的一個活塞協助司機的被加壓的流體。在電動液壓的指點，一個電子動力方向盤概念使用一臺電動機駕駛的一個高效率泵浦。 泵浦速度是由一個電控制器調控的變化泵浦壓力和流程，提供被剪裁的指點努力為不同的駕駛的情況。 泵浦可以跑在低速或關閉提供節能在大多時間在多數世界市場上)直向前的駕駛期間(直接電指點使用一臺電動機附加指點機架通過齒輪機構(沒有泵浦或流體)。 各種各樣的馬達類型和齒輪驅動是可能的。 微處理器控制指點動力學和司機努力。 輸入包括車速和指點、輪子扭矩，角位和轉動率。
工作運行時的具體細節
A “指點傳感器”位于它進入傳動箱住房的輸入軸。 指點傳感器實際上是在一個的二個傳感器： 那“扭矩的傳感器”轉換指點扭矩輸入和它的方向成電壓信號，并且那“自轉的傳感器”轉換轉動速度和方向成電壓信號。
分享同一套住房的“接口”電路轉換從扭矩傳感器和自轉傳感器的信號成控制電子學可能處理的信號。從指點傳感器的輸入由那微處理器的控制單元消化也監測從車速傳感器的輸入。 傳感器輸入然后被比較確定多少機械化根據一張被預編程序的“力量地圖”需要在控制單元的記憶。 控制單元然后派出適當?shù)拿顚θ缓蠊┙o電動機以潮流的“電源裝置”。
馬達推擠機架在右邊或左根據哪個方式電壓流動(扭轉潮流扭轉方向馬達旋轉)。 增加潮流對馬達增加功率協助。系統有三種操作方式： 左邊或右邊機械化提供以回應從指點扭矩和自轉傳感器的輸入的輸入的“正?！笨刂品绞? 被用于在完成輪以后協助指點回歸的“回歸”控制方式; 并且改變與車速改進路感受和挫傷傭金的“更加潮濕的”控制方式。如果方向盤被轉動，并且舉行在充分鎖位置和指點協助到達最大值，控制單元使潮流降低到電動機防止也許損壞馬達的超載情況。 控制單元也被設計保護馬達以防止電壓浪涌免受一個有毛病的交流發電機或充電的問題。
電子轉向控制單位有能力在自我診斷的缺點通過監測系統輸入和產品和電動機的激勵電流上。 如果問題發生，控制單元通過開動在電源裝置的一個故障自動保險的中轉關閉系統。 這消滅所有機械化，造成系統恢復回到手工指點。 破折號EPS警告燈也被闡明警告司機。 要診斷問題，技術員跳服務檢查連接器的終端并且讀出問題代碼。
當前發明與提供的供給動力的援助一電子功率驅動器馬達關連給車操縱機構。根據當前發明的一個方面，那里為提供供給動力的援助提供一個電子功率驅動器機制給有車的操縱機構一名手動地可旋轉的成員為操作操縱機構、傳動機構包括可行扭矩的傳感器感覺手動地被申請于可旋轉的成員的扭矩，一個電子功率驅動器馬達操縱著被連接到可旋轉的成員和安排控制主驅動電動機自轉速度和方向以回應從扭矩傳感器收到的信號的控制器，扭矩傳感器包括為與可旋轉的成員的連接適應的傳感器軸形成引伸因此，以便扭矩通過前述傳感器軸被傳送，當時 可旋轉的成員被轉動，并且應變儀在導致的信號傳感器軸手動地登上表示通過前述軸被傳送的相當數量扭矩。
傳感器軸不旋轉更好地登上在一個軸向末端在第一名聯結成員和不旋轉地登上在它的相反軸向末端在第二名聯結成員，第一和第二名聯結成員相互允諾允許有限的自轉之間連接，以便在一個被預先決定的極限之下的扭矩由僅傳感器軸傳送，并且，以便在前述被預先決定的極限之上的扭矩通過第一和第二名聯結成員被傳送。
更適宜地安排第一和第二名聯結成員作為操縱的連接的第一和第二個部分的一座橋梁互相的旋轉式成員。合適的傳感器軸是通常在多數的長方形橫斷面它的長度中。應變儀包括一個或更多的適應地看見了諧振器綁到傳感器軸上。好的馬達操縱的被連接到可旋轉的成員通過傳動器。馬達更好地包括一個工具箱和同心地被安排相對可旋轉的成員。當前發明的許多方面此后將描述，關于伴隨的圖畫 ：圖1是一個車操縱機構的一個圖表看法包括一個電子功率驅動器機制根據當前發明，圖 2是說明在圖顯示的傳動機構的各種各樣的組分的之間流程圖互作用1上，圖 3是一個軸截面通過在圖顯示的傳動機構1，圖4上是一張截面圖被采取沿著線IV-IV在表3，圖5是在圖顯示的輸入推進聯結的一張更加詳細的分解圖3上，和圖 6是顯示在表3.的傳動器的一張更加詳細的分解圖。 圖1的最初Referring，那里顯示一個車操縱機構10操縱的被連接到一個對易操縱的路輪子12。這個顯示的操縱機構包括一個齒條和齒輪匯編14被連接到路輪子12通過聯接15。 鳥翼末端(沒顯示)匯編14可旋轉地駕駛一名手動地可旋轉的成員以駕駛桿18的形式哪些由方向盤19手動地轉動。這個駕駛桿18包括包括一臺電主驅動電動機的一個電力的傳動機構30 (沒顯示在駕駛的鳥翼末端圖1)上以回應在駕駛桿18的扭矩裝貨為了為機械人員提供力量援助，當轉動方向盤19時。如概要地被說明在表2，電力的傳動機構包括測量駕駛桿申請的扭矩18，當駕駛鳥翼末端時并且提供信號給控制器40的扭矩傳感器20。控制器40被連接到主驅動電動機50并且控制電流被提供給馬達50控制馬達50和它的自轉的方向扭矩引起的相當數量。馬達50 操縱的更適宜地被連接到駕駛桿18通過工具箱60，更適宜地一個周轉齒輪箱子和傳動器70。 在一定條件下傳動器70在正常運行時更適宜地永久地接合并且是有效的隔絕從馬達50的驅動使鳥翼末端通過傳動機構30手動地被駕駛。 這是使機制的安全特點起作用在試圖的馬達50情形下駕駛太快速的駕駛桿并且/或者在錯誤的方向或在案件 電動機和工具箱占領了。
扭矩傳感器20更適宜地是一個匯編包括在扭矩應用達到的傳感器軸登上應變儀能夠準確測量張力在一個被預先決定的范圍之內的一個短的傳感器軸。被測量扭矩的被預先決定的范圍是0-lONm; 更好是關于l-5Nm。被測量的扭矩的范圍更好地對應于大約0-1000微指令，并且傳感器軸的建筑更好被選擇這樣5Nm扭矩比在軸的2°導致較少的轉彎，少于1 °。好的應變儀是鋸諧振器，在WO91/13832被描述的一臺適當?shù)匿徶C振器。 類似在圖顯示的那WO91/13832 3上更好地運用配置，二看見諧振器被安排在對軸軸的45°和在90°對互相。諧振器經營與在200-400 MHz之間共鳴頻率和被安排導致信號到控制器1 MHz 40 ± 500 KHz根據傳感器軸的自轉方向的自我調節。 因此，當傳感器軸不被扭轉的歸結于缺乏扭矩時，它導致一個1 MHz信號。當它導致在1.0到1.5 MHz之間的一個信號的傳感器軸在一個方向被扭轉。 當傳感器軸在相反方向時被扭轉它導致在1.0到0.5 MHz之間的一個信號。 因而同樣傳感器能導致信號表示程度扭矩并且傳感器軸的自轉的方向。好的馬達扭矩引起的相當數量以回應在0-10Nm之間被測量的扭矩是0-40Nm，并且為在l-5Nm之間被測量的扭矩是0-25Nm。反饋電路提供自我調節，借以馬達使用的電流由控制器40測量并且比較保證馬達在正確方向運行并且提供期望功率協助。 控制器更好地行動使被測量的扭矩降低到零和如此控制馬達增加它的扭矩產品減少被測量的扭矩。 (沒顯示)更適宜地提供車速傳感器哪些寄發一個信號表示車速到控制器。 控制器使用這個信號修改程度力量協助提供以回應被測量的扭矩。將提供在低車速最大力量協助的，因而，并且將提供高車速極小的力量協助。更適宜地是邏輯順序器有一個現場可編程序的門數組例如XC 4005如Xilinx供應這個控制器。 這樣控制器不依靠軟件和，因此能更起作用可靠地在汽車車環境里。 被想象也許使用有邏輯的序列一個現場可編程序的列陣。 一個電力傳動機構10的A具體建筑在表3.被說明。
電子動力轉向系統（英文簡稱EPS）， 與液壓動力轉向系統（HPS）相比，EPS具有很多優點。即EPS的優勢在于：
1）效率高。HPS效率很低，一般為60%~70%；而EPS與電機連接，效率高，有的可高達90%以上。
2）耗能少。汽車在實際行駛過程中，處于轉向的時間約占行駛時間的5%，對于HPS系統，發動機運轉時，油泵始終處于工作狀態，油液一直在管路中循環，從而使汽車燃油消耗率增加4%~6%；而EPS僅在需要時供能，使汽車的燃油消耗率僅增加0.5%左右。
3）“路感“好。由于EPS內部采用剛性連接，系統的滯后特性可以通過軟件加以控制，且可以根據駕駛員的操作習慣進行調整。
4）回正性好。EPS結構簡單內部阻力小，回正性好，從而可得到最佳的轉向回正特性，改善汽車操縱穩定性。
5）對環境污染少。HPS液壓回路中有液壓軟管和接頭，存在油液泄露問題，而且液壓軟管不可回收，對環境有有一定污染；而EPS對環境幾乎沒有污染。
6）可以獨立于發動機工作。EPS以電池為動力元件，只要電池電量充足，不論發動機出于何種狀態，都可以產生助力作用。
7）應有范圍廣。
8）裝配性好易于布置。
現在，動力轉向系統已成為一些轎車的標準設置，全世界約有一半的轎車采用動力轉向。隨著汽車電子技術的發展，目前一些轎車已經使用電動助力轉向器，使汽車的經濟性、動力性和機動性都有所提高。電動助力轉向裝置是汽車上一種新的助力轉向系統裝置,近年來在國內外發展迅速,由于它采用了可編程電子控制裝置,在帶來靈活性的同時也存在著安全隱患.在分析這種產品特殊性的基礎上,筆者結合電子控制裝置的特點,指出了事關安全性的因素,提出了處理安全性的措施,并討論了幾個事關安全性的具體問題.研究結果表明:現有標準不能夠滿足電動助力轉向裝置安全性的需要;并提出了對電動助力轉向裝置進行安全性測評的思想.研究工作對電動助力轉向裝置的開發以及評價具有參考意義。
Electronic power steering system
What it is
Electrically powered steering uses an electric motor to drive either the power steering hydraulic pump or the steering linkage directly. The power steering function is therefore independent of engine speed, resulting in significant energy savings.
How it works :
Conventional power steering systems use an engine accessory belt to drive the pump, providing pressurized fluid that operates a piston in the power steering gear or actuator to assist the driver.
In electro-hydraulic steering, one electrically powered steering concept uses a high efficiency pump driven by an electric motor. Pump speed is regulated by an electric controller to vary pump pressure and flow, providing steering efforts tailored for different driving situations. The pump can be run at low speed or shut off to provide energy savings during straight ahead driving (which is most of the time in most world markets).
Direct electric steering uses an electric motor attached to the steering rack via a gear mechanism (no pump or fluid). A variety of motor types and gear drives is possible. A microprocessor controls steering dynamics and driver effort. Inputs include vehicle speed and steering, wheel torque, angular position and turning rate.
Working In Detail:
A "steering sensor" is located on the input shaft where it enters the gearbox housing. The steering sensor is actually two sensors in one: a "torque sensor" that converts steering torque input and its direction into voltage signals, and a "rotation sensor" that converts the rotation speed and direction into voltage signals. An "interface" circuit that shares the same housing converts the signals from the torque sensor and rotation sensor into signals the control electronics can process.
Inputs from the steering sensor are digested by a microprocessor control unit that also monitors input from the vehicle's speed sensor. The sensor inputs are then compared to determine how much power assist is required according to a preprogrammed "force map" in the control unit's memory. The control unit then sends out the appropriate command to the "power unit" which then supplies the electric motor with current. The motor pushes the rack to the right or left depending on which way the voltage flows (reversing the current reverses the direction the motor spins). Increasing the current to the motor increases the amount of power assist.
The system has three operating modes: a "normal" control mode in which left or right power assist is provided in response to input from the steering torque and rotation sensor's inputs; a "return" control mode which is used to assist steering return after completing a turn; and a "damper" control mode that changes with vehicle speed to improve road feel and dampen kickback.
If the steering wheel is turned and held in the full-lock position and steering assist reaches a maximum, the control unit reduces current to the electric motor to prevent an overload situation that might damage the motor. The control unit is also designed to protect the motor against voltage surges from a faulty alternator or charging problem.
The electronic steering control unit is capable of self-diagnosing faults by monitoring the system's inputs and outputs, and the driving current of the electric motor. If a problem occurs, the control unit turns the system off by actuating a fail-safe relay in the power unit. This eliminates all power assist, causing the system to revert back to manual steering. A dash EPS warning light is also illuminated to alert the driver. To diagnose the problem, a technician jumps the terminals on the service check connector and reads out the trouble codes.
Electric power steering systems promise weight reduction, fuel savings and package flexibility, at no cost penalty.
Europe's high fuel prices and smaller vehicles make a fertile testbed for electric steering, a technology that promises automakers weight savings and fuel economy gains. And in a short time, electric steering will make it to the U.S., too. "It's just just a matter of time," says Aly Badawy, director of research and development for Delphi Saginaw Steering Systems in Saginaw, Mich. "The issue was cost and that's behind us now. By 2002 here in the U.S. the cost of electric power steering will absolutely be a wash over hydraulic."
Today, electric and hybrid-powered vehicles (EV), including Toyota's Prius and GM's EV-1, are the perfect domain for electric steering. But by 2010, a TRW Inc. internal study estimates that one out of every three cars produced in the world will be equipped with some form of electrically-assisted steering. The Cleveland-based supplier claims its new steering systems could improve fuel economy by up to 2 mpg, while enhancing handling. There are true bottom-line benefits as well for automakers by reducing overall costs and decreasing assembly time, since there's no need for pumps, hoses and fluids.
Another claimed advantage is shortened development time. For instance, a Delphi group developed E-TUNE, a ride-and-handling software package that can be run off a laptop computer. "They can take that computer and plug it in, attach it to the controller and change all the handling parameters -- effort level, return ability, damping -- on the fly," Badawy says. "It used to take months." Delphi has one OEM customer that should start low-volume production in '99.Electric steering units are normally placed in one of three positions: column-drive, pinion-drive and rack-drive. Which system will become the norm is still unclear. Short term, OEMs will choose the steering system that is easiest to integrate into an existing platform. Obviously, greater potential comes from designing the system into an all-new platform."We have all three designs under consideration," says Dr. Herman Strecker, group vice president of steering systems division at ZF in Schwaebisch Gmuend, Germany. "It's up to the market and OEMs which version finally will be used and manufactured.""The large manufacturers have all grabbed hold of what they consider a core technology," explains James Handysides, TRW vice president, electrically assisted steering in Sterling Heights, Mich. His company offers a portfolio of electric steering systems (hybrid electric, rack-, pinion-, and column-drive). TRW originally concentrated on what it still believes is the purest engineering solution for electric steering--the rack-drive system. The system is sometimes refered to as direct drive or ball/nut drive.Still, this winter TRW hedged its bet, forming a joint venture with LucasVarity. The British supplier received $50 million in exchange for its electric column-drive steering technology and as sets. Initial production of the column and pinion drive electric steering systems is expected to begin in Birmingham, England, in 2000.
"What we lack is the credibility in the steering market," says Brendan Conner, managing director, TRW/LucasVarity Electric Steering Ltd. "The combination with TRW provides us with a good opportunity for us to bridge that gap." LucasVarity currently has experimental systems on 11 different vehicle types, mostly European. TRW is currently supplying its EAS systems for Ford and Chrysler EVs in North America and for GM's new Opel Astra.
In 1995, according to Delphi, traditional hydraulic power steering systems were on 7596 of all vehicles sold globally. That 37-million vehicle pool consumes about 10 million gallons in hydraulic fluid that could be superfluous, if electric steering really takes off.
The present invention relates to an electrically powered drive mechamsm for providing powered assistance to a vehicle steering mechanism. According to one aspect of the present invention, there is provided an electrically powered driven mechanism for providing powered assistance to a vehicle steering mechanism having a manually rotatable member for operating the steering mechanism, the drive mechanism including a torque sensor operable to sense torque being manually applied to the rotatable member, an electrically powered drive motor drivingly connected to the rotatable member and a controller which is arranged to control the speed and direction of rotation of the drive motor in response to signals received from the torque sensor, the torque sensor including a sensor shaft adapted for connection to the rotatable member to form an extension thereof so that torque is transmitted through said sensor shaft when the rotatable member is manually rotated and a strain gauge mounted on the sensor shaft for producing a signal indicative of the amount of torque being transmitted through said shaft.Preferably the sensor shaft is non-rotatably mounted at one axial end in a first coupling member and is non-rotatably mounted at its opposite axial end in a second coupling member, the first and second coupling members being inter-engaged to permit limited rotation there between so that torque under a predetermined limit is transmitted by the sensor shaft only and so that torque above said predetermined limit is transmitted through the first and second coupling members.The first and second coupling members are preferably arranged to act as a bridge for drivingly connecting first and second portions of the rotating member to one another.Preferably the sensor shaft is of generally rectangular cross-section throughout the majority of its length.Preferably the strain gauge includes one or more SAW resonators secured to the sensor shaft.Preferably the motor is drivingly connected to the rotatable member via a clutch.Preferably the motor includes a gear box and is concentrically arranged relative to the rotatable member.Various aspects of the present invention will hereafter be described, with reference to the accompanying drawings, in which :Figure 1 is a diagrammatic view of a vehicle steering mechanism including an electrically powered drive mechanism according to the present invention,Figure 2 is a flow diagram illustrating interaction between various components of the drive mechanism shown in Figure 1 ,Figure 3 is an axial section through the drive mechanism shown in Figure 1, Figure 4 is a sectional view taken along lines IV-IV in Figure 3,Figure 5 is a more detailed exploded view of the input drives coupling shown in Figure 3, and Figure 6 is a more detailed exploded view of the clutch showing in Figure 3. Referring initially to Figure 1 , there is shown a vehicle steering mechanism 10 drivingly connected to a pair of steerable road wheels The steering mechanism 10 shown includes a rack and pinion assembly 14 connected to the road wheels 12 via joints 15. The pinion(not shown) of assembly 14 is rotatably driven by a manually rotatable member in the form of a steering column 18 which is manually rotated by a steering wheel 19.The steering column 18 includes an electric powered drive mechanism 30 which includes an electric drive motor (not shown in Figure 1) for driving the pinion in response to torque loadings in the steering column 18 in order to provide power assistance for the operative when rotating the steering wheel 19.As schematically illustrated in Figure 2, the electric powered drive mechanism includes a torque sensor20 which measures the torque applied by the steering column 18 when driving the pinion and supplies a signal to a controller 40. The controller 40 is connected to a drive motor 50 and controls the electric current supplied to the motor 50 to control the amount of torque generated by the motor 50 and the direction of its rotation.The motor 50 is drivingly connected to the steering column 18 preferably via a gear box 60, preferably an epicyclic gear box, and a clutch 70. The clutch 70 is preferably permanently engaged during normal operation and is operative under certain conditions to isolate drive from the motor 50 to enable the pinion to be driven manually through the drive mechanism 30. This is a safety feature to enable the mechanism to function in the event of the motor 50 attempting to drive the steering column too fast and/or in the wrong direction or in the case where the motor and/or gear box have seized.
The torque sensor 20 is preferably an assembly including a short sensor shaft on which is mounted a strain gauge capable of accurately measuring strain in the sensor shaft brought about by the application of torque within a predetermined range.Preferably the predetermined range of torque which is measured is 0-lONm; more preferably is about l-5Nm.Preferably the range of measured torque corresponds to about 0-1000 microstrain and the construction of the sensor shaft is chosen such that a torque of 5Nm will result in a twist of less than 2° in the shaft, more preferably less than 1 ° .Preferably the strain gauge is a SAW resonator, a suitable SAW resonator being described in WO91/13832. Preferably a configuration similar to that shown in Figure 3 of WO91/13832 is utilised wherein two SAW resonators are arranged at 45° to the shaft axis and at 90° to one another.Preferably the resonators operate with a resonance frequency of between 200-400 MHz and are arranged to produce a signal to the controller 40 of 1 MHz ± 500 KHz depending upon the direction of rotation of the sensor shaft. Thus, when the sensor shaft is not being twisted due to the absence of torque, it produces a 1 MHz signal.When the sensor shaft is twisted in one direction it produces a signal between 1.0 to 1.5 MHz. When the sensor shaft is twisted in the opposite direction it produces a signal between 1.0 to 0.5 MHz. Thus the same sensor is able to produce a signal indicative of the degree of torque and also the direction of rotation of the sensor shaft.Preferably the amount of torque generated by the motor in response to a measured torque of between 0-10Nm is 0-40Nm and for a measured torque of between l-5Nm is 0-25Nm.Preferably a feed back circuit is provided whereby the electric current being used by the motor is measured and compared by the controller 40 to ensure that the motor is running in the correct direction and providing the desired amount of power assistance. Preferably the controller acts to reduce the measured torque to zero and so controls the motor to increase its torque output to reduce the measured torque.A vehicle speed sensor (not shown) is preferably provided which sends a signal indicative of vehicle speed to the controller. The controller uses this signal to modify the degree of power assistance provided in response to the measured torque.Thus at low vehicle speeds maximum power assistance will be provided and a high vehicle speeds minimum power assistance will be provided.The controller is preferably a logic sequencer having a field programmable gate array for example a XC 4005 as supplied by Xilinx. Such a controller does not rely upon software and so is able to function more reliably in a car vehicle environment. It is envisaged that a logic sequence not having a field programmable array may be used.
Electronic power steering system (English as EPS), and hydraulic power steering system (HPS) compared to, EPS has many advantages.
The advantage is that the EPS:
1) high efficiency. HPS efficiency is very low, generally 60% to 70%, while EPS and electrical connections, high efficiency, and some can be as high as 90 percent.
2) less energy consumption. Automobile traffic in the actual process, at the time to about 5 percent of the time travelling, the HPS system, engine running, the pumps will always be in working condition, the oil pipeline has been in circulation, so that vehicle fuel consumption rate by 4 % To 6%, while EPS only when needed for energy, vehicle fuel consumption rates only increased by 0.5 percent.
3) "Road sense of" good. Because EPS internal use of rigid, system of the lag c