714 軸承蓋落料、拉深、沖孔復合模設計（有cad圖）,714,軸承蓋落料、拉深、沖孔復合模設計（有cad圖）,軸承,蓋落料,沖孔,復合,設計,cad 湖南工學院畢業設計（論文） 摘 要 介紹了軸承蓋冷沖壓成形過程，經過對軸承蓋的批量生產、零件質量、零件結構以及使用要求的分析、研究，按照不降低使用性能為前提，將其確定為沖壓件，用沖壓方法完成零件的加工，沖壓基本工序為：落料、拉深、沖孔，然后根據對工序的初步計算，確定工序數目，如沖壓次數，拉深次數，對工序順序的安排，一般根據各工序的變形特點，質量要求來確定，由于本工件為帶孔的落料、拉深件，因此先落料，再拉深，最后沖孔，根據生產批量和條件（沖壓加工條件和模具制造條件）確定工序組合，因為生產批量大，所以將各個工序組合在一起，并用復合模沖壓，這樣就提高了產品的生產率。通過充分利用現代模具制造技術對傳統機械零件進行結構改進、優化設計、優化工藝方法能大幅度提高生產效率，這種方法對類似產品具有一定的借鑒作用。 關鍵字：軸承蓋；沖壓；工序；生產批量；生產效率 ABSTRACT Introduced to carry the bearing cover cold hurtle to press to take shape the process, pass by to the batch quantity production, spare parts quantity, the spare parts structure and usage request of carry the bearing cover of analysis, study, according to not lower to use the function as premise, is certain in order to hurtle to press the piece, it uses to hurtle to press the method to complete the spare parts to process, hurtling to press basic work preface is: Fall to anticipate, pull deep, hurtle the bore, then according to the initial calculation of the work preface, make sure the work ordinal number eyes, if hurtle to press the number of times, pulling the deep number of times, to the in proper order arrangement of the work preface, general transform the characteristics according to each work preface, the quantity request to certain, because of in order to take the bore to fall to anticipate, pull the deep piece, this work piece so fall to anticipate first, then pull deeply, blunt bore of end, according to produce the batch quantity and condition( hurtle to press to process the condition and molding tools to make the condition)s to make sure the work that the preface combine, because of produce the batch quantity big, so combine each work preface together, counteract compound the mold hurtles to press, raising the rate of production of the product thus. Pass to make use of the modern molding tool manufacturing technique to carry on the structure improvement to the traditional machine spare parts well, excellent turn the design, the excellent chemical engineering skill method ability the significant exaltation produces the efficiency, this kind of method to similar the product has to certainly draw lessons from the function. Key words: bearing cover; stamping; process; Production batch; Production efficiency