校直機設計,校直機,設計 摘 要 機械、汽車、電機等行業大量使用軸類、桿類零件，這些零件的原材料在粗加工或熱處理等過程中不可避免的會出現彎曲變形，如果不進行校直處理會直接影響工件的后序加工和使用，甚至可能出現相當數量的廢品。所以為了能獲得下道工序所允許的最小切削量或通過精密校直保證工件達到嚴格的最終設計公差要求，校直機成了工件熱處理后不可缺少的關鍵設備。本人設計的是JZ-I型校直機，該校直機可用于校直單體支柱的油缸與活柱坯料熱處理造成的變形，亦可用來校直類似的桿類管類零件。另備胎具也可用于鋼板調平、壓彎、壓裝等工作。并且本機可專用于單體液壓支柱活柱和油缸的一般變形校直。該機具有拆裝使用方便，靈活。 關鍵詞：校直機 液壓控制 加載油缸 Abstract Profession massive use axes class and so on machinery, automobile, electrical machinery, the pole class components, these components raw material in processes and so on rough machining or heat treatment inevitable can appear the bending strain, if does not carry on alignment processing to be able to affect the work piece directly after foreword processing and the use, even possibly appears the considerable amount the waste product. In order to therefore can obtain the smallest cutting quantity which the evil ways working procedure permits or through the precise alignment guarantee work piece achieve the strict finally design common difference request, after alignment machine has become the work piece heat treatment the essential essential equipment. Myself design am JZ-I alignment machine, this alignment machine available the distortion which creates in the alignment monomer prop cylinder and the plunger semifinished materials heat treatment, also available comes the alignment similar pole class tubular goods components. Prepares in addition molds available also in the steel plate leveling, bends, the pressure installs and so on the work. And the this aircraft may use in the monomer hydraulic pressure prop plunger and the cylinder general distortion specially alignment. This machines and tools have the disassembling easy to operate, nimble. Key word:Alignment machine Hydraulic control Loads the cylinder II