Φ1200熟料圓錐式破碎機(論文+DWG圖紙)
Φ1200熟料圓錐式破碎機(論文+DWG圖紙),熟料,圓錐,破碎,論文,dwg,圖紙
摘 要
本文介紹了熟料圓錐式破碎機,該破碎機采用超慢速剪切細碎原理。具有細碎效率高、功耗極低、無揚塵、幾乎無振動。使用壽命延長5～7倍，易損配件費用底，結構簡單，操作容易，維修極為方便。它主要由電動機、機架、外筒體、分級罩、回轉筒、空心軸、大齒輪、小齒輪 、動顎板和靜顎板組成。工作時,起動減速電機,減速電機軸端的小齒輪帶動大齒輪轉動,從而使回轉筒下端的定動顎板之間形成一個動態(tài)的 V形圓環(huán)破碎腔,物料有進料筒落下,細粉及細顆粒通過篩板分離落入回轉筒下部至漏斗排除,粗顆粒由錐形篩板均勻地撒入V形破碎腔內受定動顎板剪磨,由大顆粒變成小顆?；蚍勰┒渲谅┒啡肟?從漏斗出口排出.該破碎機廣泛應用于金屬、非金屬礦、冶金、材料、化工、磨料和建材等行業(yè)的物料破碎領域.
關鍵詞：圓錐式破碎機 超慢速剪切 熟料細碎
Abstract
This text has introduced the taper type breaker of grog , this breaker is adopted and shears the principle in small, broken bits ultra and slowly rapidly. Have in small, broken bits efficiency high, consumption extremely low, have and raise dust, for vibration. Service life lengthens 5-7 times, apt to decrease the expenses bottom of the fittings, the structure is simple, It is easy to operate, it is extremely convenient to maintain. Mainly by motor, framework, other tube body, put on, turn tube, empty mandrel, big gear wheel, pinion, move it jaw board and quiet jaw board make up round in grades. While working, start and moderate the electrical machinery, the pinion which moderates the axle end of the electrical machinery drives the big gear wheel to rotate, Make and turn to move jaw board form first dynamic V round ring broken definitely tubes of underpart round, Supplies have charge-in tube drop, detailed powder and through sift detailed particle board separate and fall into and turn, Thick particle sift by toper board spread and enter V broken move jaw board cut and rubed definitely even, Turns from big particle into a tiny particle or the powder and falls, discharge from the funnel export . This breaker is applied to the supplies broken field in metal, nonmetal ore, metallurgy, material, chemical industry, abrasive and building materials, etc. extensively.
Keywords: cone crusher Shear ultra and slowly rapidly The grog is in small, broken bits
收藏