中型載貨汽車(5+1)變速器三維設計（直接操縱 鎖環式同步器 全同步器換擋）【含UG三維圖紙模型、說明書文檔】,含UG三維圖紙模型、說明書文檔,中型載貨汽車(5+1)變速器三維設計（直接操縱,,鎖環式同步器,,全同步器換擋）【含UG三維圖紙模型、說明書文檔】,中型,載貨,汽車,變速器,三維設計,直接,操縱,鎖環式 摘要 本次中型貨車變速器的設計，主要目的是檢驗大學四年的學習成果以及為將來的工作打下堅實的基礎。文中闡述了變速器的功用與設計要求，對該變速器進行了了大量的調查研究，并進行了初步的方案論證，根據設計要求決定選用了三軸式五檔變速器，中間軸采用旋轉式，倒檔的換檔方式采用二軸上滑動齒輪換檔，其他檔位采用同步器換檔，根據輕型貨車的要求，操縱機構選用遠距離操縱。說明并論證了變速器主要參數的確定，齒輪幾何參數的計算、列表、齒輪材料的選擇、齒輪的強度計算、強度校核，軸的設計及強度剛度校核，軸的材料選擇，軸承的選擇，花鍵的選擇和校核。并簡單介紹了變速器的拆裝順序，以及對本次設計做出總結。整個畢業設計歷時兩個多月，在老師的悉心指導和同學的熱心幫助下得以順利完成。最后感謝在畢業設計期間給予我?guī)椭睦蠋熀屯瑢W(xué)。 本次設計，計算機繪制1張A0號圖紙，翻譯外文資料一份，編寫MATLAB語言程序1份，以及編輯說明書一份 關鍵詞：變速器，設計，三軸式，倒檔軸 ABSTRACT The design of this light truck transmission, the main purpose is to test the results of four years of study in the university and lay a solid foundation for the future work.This design explained the function of the transmission and design requirements, had the transmission a large number of surveys and studies, and conducted a preliminary studies program. According to the design requirement to choose a three-axis 4th speed transmission and the fixed middle shaft, the reverse stall used to shift the gear on the reverse gear shaft, the other stalls used Synchronizer shift, according to the design requirements of the light truck,the manipulation agencies use remote control. Noted and demonstrated that the transmission parameters, the calculations and the list of gear geometry parameters,the gear material selection,gear strength and strength check, the design of the shaft and stiffness and strength check,shaft material selection, bearing selection,spline options and check.And briefly introduce the transmission disassembly sequence, as well as a summary of this design.The whole graduation design lasts three months, and it is completed under the teacher's leading and the help of the classmate smoothly. Finally thanks to the teachers and classmates who give me much help during the graduation design. This design, includes 1 No.0 diagram papers and 2 copies of three-dimensional graph by computer and manual drawing, translating a foreign information, preparing four MATLAB Programming Language, and edit a manual. Keyword: transmission, design, three-axis, the reverse gear shaft 2012年5月18日