壓縮包內含有CAD圖紙和說明書,均可直接下載獲得文件，所見所得，電腦查看更方便。Q 197216396 或 11970985
Study on the Technology of the Coal Mining Safety Monitoring System
Abstract
New development and application of the wireless radio frequency make the application of the RFID (Radio Frequency Identification) technology become more and more extensively, and combining the characteristics of RFID technology with the mine, we established an underground safety monitoring system with integrality, real-time and flexibility, which could automatically alarm when dangers happen and enhance the search and rescue efficiency. The system could manage the harm-gas concentration, planning arrangement of workers, access control for the works passing in and out laneway, distribution of laneway personnel and workers’ data, realize the informationization and visualization of the underground management, and enhance the mining production management level and the work safety level of the mine.
Keywords: RFID, Safety monitoring system, E-tag, Reader-writer
Mining accidents often happened in China in recent years, and except for mine owners’ weak safety and legal consciousness, the lagged safety establishments and the imperfect managements of the mining personnel and equipments were the important causes. Through analyzing several extra serious accidents in the near period, following common problems generally existed (Qiu, 2007, P.28-29), (1) the information communication between the ground personnel and the underground was not timely, (2) ground personnel could not dynamically grasp the underground personnel’s distribution and operation situation, and could not exactly position underground personnel, (3) once the mine accident happened, the efficiency of rescue was low, and the effect was worse. Therefore, it is very important and urgent to exactly and quickly carry out the coal mining safety monitoring function (Liu, 2004, P.22-25 & Guo, 2005), effectively manage the miners, and ensure the high-efficiency operation of the rescue.
The coal mining personnel and vehicle safety monitoring system proposed in the article can track, monitor and position the harmful gases, personnel and vehicles in the mine real time, and offer dynamic information about the mine laneway network, personal position, vehicle position, dangerous region and corresponding clews for ground personnel. If the accident happens, the system also can inquire about the personnel distribution, the personnel quantity, the personnel withdrawal line to offer scientific references for the accident rescue from the monitoring computer. At the same time, the mangers can utilize the daily attendance function in the system to implement attendance management for miners.
1. Introduction of the RFID technology
RFID (Zhou, 2006 & Nadeem Raza, 1999) is a sort of non-contact automatic identification technology, and it can automatically identify the objective by the radio frequency signals, quickly track the goods and exchange data. The identification work needs not human operation, and can work under various severe environments. RFID technology can identify high-speed objects and identify multiple tags simultaneously, and the operation is quick and simple. RFID technology was generated in the Second World War, and it is the successor of the traditional code technology, and its major core part is the E-tag, and the identification system could read the information stored in the E-tag through the radio waves emitted by the reader-writer from a few centimeters to a few meters, and identify the identity of the goods, people and objects represented by the E-tag.
1.1 Composing of RFID system
RFID systemis generally composed by E-tag, reader-writer and computer communication network(Simson Garfinekel, 2005).
1.1.1 E-tag
E-tag stores correlative information of the identified objects, and it is usually put on the identified objects, and the information stored by it can be read and written by the radio frequency reader-writer through the non-contact mode.
1.1.2 Reader-writer
The reader-writer is the equipment which can be used to read and write the information of the E-tag by the radio frequency technology. The tag information read by the reader-writer can be managed and transmitted by the computer network system.
1.1.3 Computer communication network
In the RFID system, the computer communication network is generally used to manage the data and complete the function of communication transmission. The reader-writer can connect with the computer communication network by the standard interface to realize the communication and data transmission.
1.2 Work principle of RFID system
RFID technology is a sort of non-contact information transfer mode realized by the radio frequency signals through space coupling (alternating magnetic field or electromagnetic field), and it identifies the objective through the transferred information. Its work principle can be described as follows (Klaus Finkenzeller, 2003): reader-writer emits energy in one region, form the electromagnetic field, and the size of the region is decided by the work frequency and antenna size, and when the E-tag passes this region, the system checks the signal of the reader-writer and stores the electromagnetic wave energies emitted by the reader-writer to be the electric energy needed by the tag, and the tag transmits the interior information to the reader-writer by the form of the radio wave, and the reader-writer accepts the data of the E-tag, encodes and implement fault check to judge the validity of the data, and transfers the data to the computer communication network for the data processing.
1.3 Technical characteristics of RFID
1.3.1 Data read and write
RFID reader can read the data to the database without contact, and process multiple tags once, and write the logistic processing state into the tag for the logistic processing in the next stage.
1.3.2 Miniaturized and diverse form
RFID will not be limited by the size or form when it reads data, so it needs not to use the paper with fixed size or print quality to fit for the precision. In addition, E-tag of RFID can be applied in different products by small size, so we can more flexibly control the production of the products, especially the application on the production line.
1.3.3 Anti-pollution
RFID possesses strong anti-pollution nature for water, oil or drugs. And in the dark or polluted environment, RFID also can read data.
1.3.4 Repetitive use
Because RFID is electric data which can be written repetitively, so the tag can be used repetitively.
1.3.5 Penetrability
If RFID is covered by the paper, wood, plastics or non-metal or non-transparent materials, it can communicate through these materials except for the irons or other metals.
1.3.6 Big memory capacity of data
The data capacity will be extended with the development of the memory scale, and the quality of the material carried by the goods is larger, the requirement of the capacity for the volume label also increase, and RDID will not be restrained.
1.3.7 System safety
The system stores the data from the central computer to the work piece which will largely enhance the safety of the system.
1.3.8 Data safety
The checkout method or the cycle redundancy checkout method will be used to ensure the data veracity stored in the radio frequency tag.
2. Total design and work principle of the monitoring system
2.1 System design
Except for fulfilling the function requirements, the design project should fully consider the stability,reliability,anti-jamming ability, fault-tolerance ability and abnormity protection, so the total design of the system should be embodied in following aspects.
(1) The design could effectively identify and monitor underground personnel, and realize the humanization,informationization and automatization.
(2) The design could effectively offer personnel’s passing in and out, attendance and monitoring and relative management information, and once the accident happens, the design could ensure the normal implementation of the rescue.
(3) The design of the system could possess the natures of safety, maintenance and expansion.
(4) The design could effectively test the concentration of harmful gases and quickly react.
2.2 System work principle
The underground station equipment emits the encrypted information to the exterior by the antenna and forms certain signal emission region. The RFID cards carried by the workers will be activated when they enter into the emission region, and the information carried with the encrypted objective identification are emitted by the emission module, and the substation equipment will receive these signals and abstract the objective identification code, and transmit the code to the ground computer system to complete the function of the system. When the concentration of the harmful gases achieves certain value, the gas sensor of the substation equipment transmits the information to the A/D converter, and after the information are converted, they are transmitted to the monitoring network to realize the test and monitoring.
3. Composing and structure of the system
The safety monitoring system includes the ground part and the underground part .The products in the system adopt the sap hanging design (Tan, 2007) to ensure the normally and continually running of the system in the severe environment and offer power supply for 1~3 hours after power-down.
The underground part and the ground part adopt the RS-485 serial interface standard communication and the RS-232 standard serial interaction to connect with the transmission network. The data conversion interface is mainly composed by the power supply board, signal conversion board and safety bolt, and it is placed on the mouth of the mine, and it is mainly used to ensure the information exchange between the underground monitoring points and the ground monitoring center, so the system needs not the RFID and A/D converter. Figure 3 is the exchange of the communication signals between the ground and the underground.
3.1 Underground part
The underground part is the core part of the monitoring system, and it includes the fieldbus and a series of substations which are used to monitor and control the personnel. The fieldbus is the network which connects the substation and transmits information. Some substations are used to position the underground workers and equipments real time. The positioning mode of the personnel and equipments is the signal strength monitoring method, and when the E-tag carried by one worker is near certain positioning station, the signals acquired by the station are strong, so we can judge the position of the tag, and when the E-tag is in the superposition region of two stations, the signal strengths of two station will be different, and we can judge the position of the tag by comparing the strengths of the signals. Other substations are mainly composed by sensor, A/D converter, micro-controller and RFID module, and they can monitor the harmful gases real time and acquire the transmission of the information, and when the concentration of the harmful gases exceeds the safety value, the ground work platform and the underground fixed monitor point emit the alarm simultaneously. The substation in the underground part adopts the wire communication, the serial interface and the RS-232 serial data interface standard, and the bus transmission and the serial interface are used for the future expansion of the system function.
3.2 Ground part
The ground part mainly includes the management operation system, and it is the base of the whole safety monitoring system, and its main functions are to complete the information acquirement, real-time processing and storage of the check point. The information from the underground include not only the concentration of the harmful gases, but the information about the underground personnel and equipment, and these large-size data are all stored in the database through compression as the base of the monitoring and controlling.
4. Conclusions
In this article, we applied the RFID technology in the coal mining management, and established an underground safety monitoring system with integrality, real-time and flexibility, which could automatically alarm when dangers happened and enhanced the search and rescue efficiency. The system could manage the harm-gas concentration, planning arrangement of workers, access control for the works passing in and out laneway, distribution of laneway personnel and workers’ data, realize the informationization and visualization of the underground management, and largely enhance the mining production management level and the work safety level of the mine.
The safety monitoring system is based on the safe production of the mine, and the module of RFID is the major equipment, and the wire communication network is the ligament, and the monitoring central PC computer is the central computer management system. The system could improve the safety mechanism for the miners and reduce the cost of the management, and the technology will be the new trend of the mining safe production monitoring.
中文譯文
關于煤礦安全監控系統技術的研究
前言：無線射頻的新的發展和運用使得RFID（射頻識別）技術的應用越來越廣泛。同時結合礦山與RFID技術的特點，我們建立了一個地下的安全完整的、實時靈活的監測系統。這套系統能在發生危險時自動報警并且提高搜索和救援的效率。該系統可以管理危害氣體的濃度、規劃工人的安排、進出巷道通過工作的訪問控制、巷道人員的分布和工人的資料，實現地下管理的信息化和可視化，提高礦業生產管理水平和礦井安全生產水平。
關鍵詞：射頻識別，安全監控系統，電子標簽，讀寫器
煤礦事故往往發生在中國近幾年，除了礦業主的安全和法律意識薄弱，滯后的安全機構和采礦的人員和設備的不完善管理人員是重要原因。通過分析近期內一些十分嚴重的事故，一般存在以下常見問題：（1）地面人員和地下人員之間的信息溝通不及時；（2）地面人員不能動態地掌握井下人員的分布和操作情況，并且不能掌握地下人員的確切位置；（3）一旦煤礦事故發生，救援效率低，效果較差。因此，準確、迅速實施煤礦安全監控職能非常重要和緊迫，有效管理礦工，并確保救援高效率的運作。
文章中提出的煤炭采礦人員和車輛安全監測系統可以跟蹤、監視和定位在礦井實時的有害氣體，人員和車輛以及提供有關網絡的礦井巷道，個人的定位，車輛的位置，危險區域的動態信息和地面人員相應線索。如果發生意外，該系統還可以查詢有關人員的分配，人員數量，人員撤離路線，以提供從事故救援監視計算機科學依據。同時，管理人員可以利用系統的日?？记诠δ軐嵤┑V工考勤管理。
RFID技術簡介
射頻識別是一種非接觸式自動識別技術進行排序，可以自動識別的無線電頻率信號的目標，迅速跟蹤貨物和交換數據。身份查驗工作無須人工操作，并能在各種嚴峻的環境下工作。RFID技術可識別高速對象和多個標簽同時識別，操作簡單快捷。RFID技術是產生于第二次世界大戰，它是在繼承傳統的編碼技術，其主要的核心部分是電子標簽，識別系統可以讀取電子標簽存儲通過無線電波的資料排放的讀者從幾厘米到數米的作家，并確定貨物的身份，人民和電子標簽代表的對象。
1.1 RFID的系統組成
射頻識別系統通常由電子標簽，讀寫器和計算機通訊網絡組成。
1.1.1電子標簽
電子標簽存儲相關信息確定的對象，它通常是在確定的目標付諸表決，并通過它儲存的信息可以讀取和射頻讀寫器寫入通過非接觸模式。
1.1.2讀寫器
讀寫器是一個可以用來讀取和寫入射頻技術的電子標簽信息的設備。標簽上的信息的讀寫器讀取都可以處理，由計算機網絡系統傳輸。
1.1.3計算機通信網絡
在RFID系統，計算機通信網絡一般是用來管理數據和完整的通信傳輸功能。該讀寫器可以通過連接標準接口的計算機通信網絡，實現通訊和數據傳輸。
1.2 RFID的工作原理系統
RFID技術是一種非接觸式信息傳遞的通過空間耦合交變磁場或電磁場（射頻信號實現方式排序），并通過傳輸?shù)男畔⒋_定的目標。它的工作原理可描述如下：在一個區域讀寫器發出的能量，形成電磁場，以及區域的大小取決于工作頻率和天線尺寸，當電子標簽通過此區域，系統檢查了讀寫器和存儲電磁波由讀寫器發出的信號能量是由標記電能需要，和標記的內部信息傳遞給讀者，作家的對無線電波的形式，讀者，作家接受了電子標簽的數據，編碼并實施故障檢查判斷數據的有效性，并傳送數據，為數據處理計算機通信網絡。標簽進入磁場后，接收解讀器發出的射頻信號，憑借感應電流所獲得的能量發送出存儲在芯片中的產品信息（Passive Tag，無源標簽或被動標簽），或者主動發送某一頻率的信號（Active Tag，有源標簽或主動標簽）；解讀器讀取信息并解碼后，送至中央信息系統進行有關數據處理。
一套完整的RFID系統, 是由閱讀器(Reader)與電子標簽(TAG)也就是所謂的應答器(Transponder)及應用軟件系統三個部份所組成, 其工作原理是Reader發射一特定頻率的無線電波能量給Transponder, 用以驅動 Transponder電路將內部的數據送出，此時 Reader便依序接收解讀數據, 送給應用程序做相應的處理。
以RFID卡片閱讀器及電子標簽之間的通訊及能量感應方式來看大致上可以分成, 感應偶合(Inductive Coupling) 及后向散射偶合(Backscatter Coupling)兩種, 一般低頻的RFID大都采用第一種式, 而較高頻大多采用第二種方式。
閱讀器根據使用的結構和技術不同可以是讀或讀/寫裝置，是RFID系統信息控制和處理中心。閱讀器通常由耦合模塊、收發模塊、控制模塊和接口單元組成。閱讀器和應答器之間一般采用半雙工通信方式進行信息交換，同時閱讀器通過耦合給無源應答器提供能量和時序。 在實際應用中，可進一步通過Ethernet或WLAN等實現對物體識別信息的采集、處理及遠程傳送等管理功能。應答器是RFID系統的信息載體，目前應答器大多是由耦合原件（線圈、微帶天線等）和微芯片組成無源單元。
1.3 RFID的技術特點
1.3.1數據讀取和寫入
RFID讀取器可以讀取數據到數據庫中沒有接觸，一旦和處理多個標簽，并寫入了下一階段物流處理標簽的物流處理的狀態。
1.3.2小型化和多樣化的形式
RFID將不會受到大小或形式時，它讀取數據有限，因此無須使用固定大小的文件或打印質量以適應精度。此外，電子標簽的RFID可以應用在不同產品體積小，所以我們可以更靈活地控制生產線產品的生產，特別是應用程序。
1.3.3反污染
RFID技術具有強大的抗水，污染性質，石油或毒品。而在黑暗或污染環境，RFID還可以讀取數據。
1.3.4重復使用
由于RFID是電子數據，可重復寫入，所以標簽可以重復使用。
1.3.5滲透性
如果RFID是由紙張，木材，塑料或非金屬或非透明材料覆蓋，它可以進行交流，除了為這些鐵桿或其他金屬材料。
1.3.6數據存儲容量大
數據容量將擴大與記憶力的開發，以及由所運貨物的材料質量越大，該卷的容量的要求，標簽也增加，RDID不會受到限制。
1.3.7系統安全
該系統由中央計算機存儲的數據，工件將在很大程度上提高系統的安全。
1.3.8數據安全
結帳方式或循環冗余校驗方法將被用于確保數據的準確性在無線電頻率標簽儲存。
二、總的設計和工作原理監測系統
2.1系統設計
除履行的功能需求，設計項目應充分考慮穩定性，可靠性，抗干擾能力，容錯能力和異常保護，因此該系統的總設計應體現在以下幾個方面。
（1）設計可以有效地識別和監測地下人員，實現人性化，信息化和自動化。
（2）設計可以有效地提供人員的傳遞和輸出，出勤和監測及相關管理信息，一旦事故發生，設計可確保救援的正常實施。
（3）該系統的設計可具有本質安全，維護和擴展。
（4）設計可以有效地測試了有害氣體的濃度，并迅速作出反應。
2.2系統工作原理
地鐵站設備發射的加密信息到外部的天線，形成一定的信號發射區。這種RFID卡由工人將被激活時，將進入發射區，并與目標識別加密攜帶的信息是由發射模塊發射和變電站設備將接收這些信號，抽象的目標識別代碼，發送代碼到地面計算機系統完成系統的功能。當有害氣體的濃度達到一定值時，對變電站設備的氣體傳感器的信息傳輸?shù)紸 / D轉換器，轉換后的信息，他們傳送到監測網絡，實現了測試和監測。
三、該系統的組成和結構
安全監測系統包括地面部分和地下部分。
該系統采用了SAP的產品掛設計，以確保為1?3小時后正常，在不斷的惡劣環境并提供電源系統運行斷電。
地下部分和地上部分采用了RS - 485串行接口標準的通信與RS - 232標準的串行交互連接與傳輸網絡。數據轉換接口，主要是由組成的電源板，信號轉換板和安全螺栓，它是在礦井口的人選，而主要是用來確保監測點之間的地下和地面監測信息交流中心，因此系統并不需要RFID技術和A / D轉換器。圖3是與地面和地下的通信信號交流。
3.1地下部分
地下部分是監測系統的核心部分，它包括現場總線和一組用于監測和控制人員變電站系列?，F(xiàn)場總線是變電站網絡的連接和傳遞信息。一些變電站是用于定位的地下工作者和設備的實時性。人事定位模式和設備是信號強度監測方法，當電子標簽由一個工人站附近進行一定的定位是，通過該站獲得的信號是強烈的，所以我們可以判斷標簽的位置，而當電子標簽中的兩站疊加區域，兩站的信號強度會有所不同，我們可以通過比較判斷信號的強度，標記的位置。其他變電站主要組成由傳感器，A / D轉換器，微控制器和RFID模塊，它們可以監視有害氣體的實時性和獲取信息的傳輸，當有害氣體濃度超過安全值，在當?shù)氐墓ぷ髌脚_和地下固定監測點同時發出警報。在地下部分變電站采用有線通信，串行接口與RS - 232串行數據接口標準，傳輸總線和串行接口是為將來擴展系統的功能使用。
3.2地面部分
地面部分主要包括管理運作體系，它是整個安全監測系統的基礎，其主要職能是完成信息獲取，實時處理和檢查點存儲。從地下不僅包括對有害氣體的濃度，但對地下的人員和設備的信息，而這些大尺寸的數據都存儲在數據庫中通過諸如監測和控制基地的壓縮信息。
四、結論
在這篇文章中，我們應用在煤炭開采管理的RFID技術，并設立了一個地下的安全與完整性監測系統，實時性和靈活性，這可能發生危險時自動報警，提高了搜索和救援效率。該系統可以管理的危害氣體濃度，規劃安排的工人，為進出巷道工程通過訪問控制，巷道支護人員和工人的數據分布，實現信息化和可視化管理的地下，并在很大程度上提高采礦生產管理水平和礦井安全生產水平。
安全監測系統是基于對煤礦安全生產，以及RFID模塊是主要的設備，以及有線通信網絡是韌帶，以及監測中心PC計算機為中心的計算機管理系統。該系統可以改善礦工的安全機制，降低管理成本，該技術將是采礦安全生產監管的新趨勢。
15