壓縮包內含有CAD圖紙和說明書,均可直接下載獲得文件，所見所得，電腦查看更方便。Q 197216396 或 11970985
摘要
印染廢水在我國工業廢水總量占有很大比例，而且具有堿性強，色度高，有機濃度高，生物降解性差等特點，如不治理，必然會對受納水體造成嚴重污染，破壞水體生態系統。
實踐證明，對于印染廢水，物化生化法是一種有效的處理工藝，但常規處理方法的效率較低，必須對其進行強化。本設計要求處理水量為5000m3/d的印染廢水。通過對印染廢水排放狀況進行研究，根據印染廢水的特點及在廢水處理中取得的成功經驗，選擇了工藝成熟、穩定、節能、占地少、效率高的水解酸化—接觸氧化法，使出水水質達到廣東省印染廢水污染物排放標準的要求。
關鍵詞：印染廢水，水解酸化，接觸氧化，混凝沉淀
Abstract
Dyeing and finishing wastewater is an important part of industry wastewater in our country, which characterized by high level of alkali, color, organics and poor biodegradability. It will make severe pollution to water system and deteriorate the aquatic ecosystem if discharged into waterbody without treatment.
It has been proved that the physicochemical treatment is one of the feasible methods in treating dyeing and finishing wastewater, but the treatment efficiency of conventional process do not very high and should be enhanced. This design handles the water measures to 5000m3/d to print to dye the wastewater。With the study of dyeing and finishing wastewater process，especially the successful experience of dyeing and finishing wastewater treating, we select the hydrolytic acidification and biological contact oxidation to treat dyeing and finishing wastewater. This way is proven to be ripe, stead, effective and compact. As a result, the discharged water can meet the emission limits of dyeing and finishing wastewater.
Key words： dyeing and finishing wastewater，hydrolytic acidification，contact oxida
tion coagulation sediment