HGC1050輕型商用車總體設計,hgc1050,輕型,商用,總體,整體,設計 摘　　要 汽車設計工作基本可分為三個階段，不同階段要解決的主要問題也不一樣。整車的總體設計主要解決社會雪球轉化為汽車性能的問題，可認為是第一階段；其次是汽車各子系統和總成的設計，主要解決汽車的功能和布置問題，可認為是第二階段；最后是零部件的設計開發，主要解決強度、壽命和生產技術的問題，可認為是第三階段。 本課題所研究的內容是5噸輕型貨車的總體設計，也就是整車總布置。工作主要是解決社會需要轉化為汽車性能的問題，也就是汽車設計的第一階段。細分下來包括汽車形式的選擇、汽車主要參數的選擇、汽車主要總成部件的選擇、動力性計算、燃油經濟性計算、汽車主要總成部件的布置、運動校核以及總布置圖的繪制。 本設計的目的是在滿足工況要求的動力性能基礎上，盡量實現提高燃油經濟性和降低排放。 文中對于如何進行汽車總布置設計進行了說明。 關鍵詞: CA1050； 汽車總體設計；總布置；動力性計算；燃油經濟性計算 ABSTRACT Automotive design work can be divided into three stages basically .Resolving main problem is different during the different stages. First stage: overall design is to resolve that social demand be converted into the problem of capability of car. Second stage: design of each subsystem and assembly resolve function and layout of car. Third stage: parts design resolves the problem of strength, life and production technology. This paper presents the overall design of 5t light truck. It resolves that social demand be converted into the problem of capability of car. It is the first stage. It includes the choice of auto form, main parameters, and main assembly parts, calculation of power , fuel economy and braking performance, layout of auto main assembly parts, sports check and drawing general arrangement. The content of design is to meet dynamic performance of working condition’ demand and try to increase fuel economy and decrease emission. This paper presents auto overall design. Key words: GHC1050; Auto overall design; General arrangement; Performance caculations; Calculations of fuel economy II