摘要簡易吊車，用于機械加工車間小范圍內的搬運和起吊，對機械車間來說，即使上小物件也有上百斤重甚至上千斤重，工人是無法搬運和搬起的，此時，車間如果有一輛此種簡易吊車，這種問題便迎刃而解了，它的使用，既不耽誤大吊車的工作，又解決了上述問題，可以提高車間的生產效率。簡易吊車由電動機經帶傳動和一對開式齒輪傳動，將運動和動力傳給卷筒，再通過鋼絲繩和滑輪組提升重物。其工作機構包括卷筒、鋼絲繩和滑輪組。傳動機構包括電動機、帶輪、齒輪和軸。因起吊時物件需要在空中停留故需要設計一制動裝置。提升或降低物件是靠電動機的正反轉，使物件停留在空中是靠制動裝置的。對原始數據和工作原理進行分析，確定出大致的傳動方案。根據大致的傳動方案圖確定所要設計的部分有工作機構、傳動機構、制動裝置、機架等，然后查閱相關資料對其進行計算和校核.因其為手推式移動吊車，故要求小吊車要有很高的靈活性，在此，把小吊車的兩后輪設計為萬向輪，可以在任意方向運動。對小吊車整體要求是工作時穩定可靠，故設計完成后要對小吊車的整體穩定性進行分析和校核，力求穩定、安全、可靠。關鍵詞：電動機； 卷筒； 齒輪； 滑輪組； 軸IABSTRACTSimple cable car, used for machining workshop small range handling and lifting , and this time, the workshop if there is such a simple cable car, this problem is solved, and its use, does not delay the work of large cranes, but also to solve the above problems, can improve plant productivity. Summary by cable car from the motor and a belt drive transmission gear off, will be sports and power to the reel, and then through the rope and pulley upgrade the heavy group. Its work, including the drum, wire rope and pulley blocks. Transmission mechanism including motor、pulleys、and gear shaft. When lifting objects because of the need to stay in the air it needs a brake. Raise or lower the object is positive on the motor so that the object is to stay in the air brakes on. On the working principle of the original data and analysis, to determine the transmission program in general. Transmission scheme in accordance with general plans to be designed to identify some of the work of agencies, transmission, brakes, chassis, etc., and then access to relevant information and check their calculation. Because of their push for mobile cranes, and called for a small a very high flexibility of the cable car in the rear two small cranes designed to Caster, you can in any direction. The overall requirements for small cable car is stable and reliable work, so after the completion of the design to the overall stability of the small cable car to carry out the analysis and verification to stability, security and reliable. Key words: Motor; Drum; Gear; Pulley systems; Axis. II