丁集礦井1.8Mta新井設計含5張CAD圖-采礦工程.zip,礦井,1.8,Mta,設計,CAD,采礦工程 Fuzzy evaluation on geological conditions of coal seam in China Zhang Dongsheng, Zhang Xianchen & Yan Xuefeng China University of Mining & Technology, Xuzhou, Jiangsu, P. R. China Dszhang123@263.net Abstract The geological conditions of coal seam are evaluated quantitatively by using fuzzy method and from pointview of coal mining. According to the evaluation results, decision-making on mining techniques, mining programming and design, production management can be carried out effectively. The latest developments in China are introduced. The evaluation contents, the structure and index system of evaluation factors, the membership functions and weights of evaluation factor, evaluation model and reliability are stated in detail. The effective application of fuzzy evaluation in the prediction of coal face output is introduced emphatically. Fuzzy evaluationon geological conditions of coal seam is the basic work that ensures a mine run efficiently, safely and steadily . Keywords:Fuzzy evaluation; geological conditions; evaluation 1 INTRDUCTION To exploit the coal resource rationally means that the mining technical level and the relevant technical decisions are suitable for the characteristic and difference of coal geological conditions. If the evaluation is far below or above the actual geological conditions, it is unfavorable to make the most of the coal natural superiority and easy to make false technical decisions. So, it is very important to improve mining effects and economic benefits that the geological conditions are evaluated appropriately and the corresponding measures are taken. 2 CONTENTS OF FUZZY EVALUATION Based on the coal mining experience and rules summarized by widely investigation, the evaluation on geological conditions of coal seam should be taken by not only studying the influence of main factors to the selection of coal mining technology and mining effects, but also constructing a comprehensive supported by National Natural Science Foundation of China（NSFC） (50374065)，NSFC for extinguished scholars (50225414) evaluation model with multi-levels and multi-factors by the use of mining theory, fuzzy mathematics andAnalytic Hierarchy Process (called AHP for short), etc. In addition, the evaluation reliability should be considered in the application of evaluation results. So, the complete contents of fuzzy evaluation should include: (1) Investigating the experience and material of geological conditions, coal mining technology, technical effects, and safety state of face extraction in typical mining district. (2) Determining the structure of evaluation factors and the index system of geological factors, the membership functions and the weights of evaluation factors, and establishing the fuzzy evaluation model by summarizing the influence of geological factors to coal mining technology and using the methods of fuzzy mathematics, etc. K (3) Dividing the coal seam into many smaller blocks ij (i is coal seam number, j is block number.)Kijaccording to geological reports, and making pre-mining evaluation of the blocks to get the pre-mining evaluation value Pij. K (4) Making the second evaluation of typical blocks ij having been mined to get the evaluation valuePPij Pij according to the geological report and supplementary geological material after mining, is more suitable to practice. R = P'' (5) Analyzing the reliability of pre-mining evaluation, P' ( R is reliability index of the pre-mining evaluation K ), R ≤1. (6) Making evaluation on the blocks, based on the Pij' and the Rij , the evaluation value of the blocks is:P0 = P' × Ri (7) Modifying the evaluation model or making a new evaluation according to its application and actual requirement. 3 STRUCTURE AND INDEX SYSTEM OF EVALUATION FACTORS The structure of evaluation factors reflects the connotation of evaluation. Its establishment should consider not only the general and specific difficult geological conditions, but also the principles of systematicness, feasibility and simplicity for the evaluation factors and indices obtained easily. Fuzzy evaluation on geological conditions of gently inclined or inclined coal seam in China consists of the evaluations for the general geological conditions and for the specific difficult geological conditions. The evaluation for the general geological conditions includes seven factors of geological structure, thickness of coal seam, stability of coal seam, pitch of coal seam, roof and floor of coal seam, hardness of coal seam and block dimension. The evaluation for the specific difficult geological conditions includes the other four factors of gas geology, hydrogeology, coal spontaneous combustion and the others besides the seven factors mentioned above. Furthermore, the geological structure contains three basic factors of fault, fold and magma. The stability of coal seam contains three basic factors of minability of coal seam, variability of coal seam and band coefficient. The roof and floor of coal seam contains four basic factors of immediate roof, main roof, false roof and immediate floor. The block dimension contains two basic factors of face length and advance length. So, there are fifteen basic factors altogether considering the thickness of coal seam, pitch of coal seam and hardness of coal seam. Quantitative indices should be selected rationally in order to evaluate the fifteen basic factors. 4 MEMBERSHIP FUNCTIONS OF EVALUA-TION FACTORS The membership function of evaluation factor is the quantitative description on fuzzy relationship between the change of a geological factor and the mining effect. It can be obtained by using technical summary, scientific research achievement, statistic analysis and specialist experience comprehensively, and adopting the statistic analysis method, undetermined coefficient method and heterogeneous fuzzy statistic method, etc. Figure 1(a), (b), (c) and (e) show the membership functions ma (a ), m m (m), ml (l)and m s (s)of coal seam pitch ( a ), thickness of coal seam (m), face length (l) and advance length (s). Membership functions of coal seam variance coefficient ( g ), minability of coal seam ( Km ), band (G ), immediate roof (o ), main roof ( N ), false roof (hv), immediate floor (Rc ) and magma (k) are m (r), m (K ), mG (G), m(s), mN (N ), m (h ), m (R ), mK (K ) , See fig.1. The membership functions mF(F) and mq (q) of fault (F) and fold (q) are where FN is the fault density, FL is the fault length coefficient, Fh is the fault drop height coefficient, q1 is the fold strength coefficient, q2 is the fold complexity coefficient. 5 WEIGHTS OF EVALUATION FACTORS The essence of the weights of evaluation factors is the quantitative description on the relative importance of geological factors influencing the coal mining technology. To determine the weights of evaluation factors should take mining law as basis and take the mutual adaptability between geological condition and mining technology as main content, and should make full use of statistic data, research achievement and specialists’ experience. AHP is the method most in use at present. Based on the knowledge of specialist, this method is more suitable to solve the evaluation on geological conditions of concrete coal seam. Table 1 shows the weights of geological factors obtained by AHP. 6 FUZZY EVALUATION MODEL 6.1 Optimal Model For Fuzzy Evaluation The linear weighted comprehensive evaluation model is often used for fuzzy evaluation on geological conditions of coal seam. In recent years, the optimal model for fuzzy evaluation is presented to reduce the subjectivity of evaluation. Its main characteristic lies in using two -basic point method. That is to say, in the evaluation system with a number of blocks, there are an ideal point corresponding with good vector G (G=(g1, g2, ┄,gn)) and an anti-ideal point corresponding with bad vector B (B=(b1, b2, ┄,bn)). SupposeRR mihat the comprehensive evaluation values of i( i= (r11, r22, ┄, r1m) is , and then compute the generalized distances D (Ri, G) and D (Ri, B). If taking the square sum of weighted distances of all samples as optimal criterion, the optimal solution of the comprehensive evaluation value is Figure 1. Membership functions of evaluation factors 6.2 Comprehensive Evaluation Model For Special Difficult Conditions Based on above-mentioned fuzzy evaluation, a comprehensive evaluation model for special difficult geological conditions of coal seam is established to get the difficult coefficient D. The greater the value of D is the more difficult the geological mining conditions are. Because the influence of individual factor to whole evaluation should be embodied, continuous multiplication must be adopted when structuring the model. That is, D =1-B× P, where B is the evaluation value of special geological conditions, P is the evaluation value of general geological conditions. Figure 2. Relationship between evaluation values and reliability Figure 2 shows the characteristic of reliability of pre-mining evaluation, based on the pre-mining and after -mining evaluation and calculation of evaluation reliability of 12 mining districts and 107 typical coal seam blocks. The greater the value of pre-mining evaluation is, the better the coal seam conditions are, and the higher the reliability of pre-mining evaluation is. On the contrary, the less the value of pre-mining evaluation is, the worse the coal seam conditions are, and the 8 PREDICTION OF COAL FACE OUTPUT Under the certain conditions of equipment, technique and management, there is a close relationship between coal face output and its geological conditions for a coal mine. Through the fuzzy evaluation on coal geological conditions and the statistic analysis on production-technique indices, the relationship between the coal face output and the fuzzy evaluation value can be fitted to establish a new model for the prediction of coal face output. There are many prediction models as linear equation, duality quadratic equation and exponential equation, etc. For example: a =C1 + C 2 P (fully-mechanized coal mining technology) a =D(C + CP + CP2) (fully-mechanized or conventionally-mechanized coal mining technology) a =D(C + CP + CP2 + CP3 ) (blasting coal mining technology) a =24.5(1.13 +1.24 ln P) (fully-mechanized coal mining technology with great power in Nantun Mine) a =(14.66ln M -6.77)(1.28 +1.4ln P) (fully-mechanized coal mining technology with sublevel caving in Dongtan Mine) where D is the difficult coefficient, C1, C2, C3, and C4 are statistic regression constants. REFERENCES [1]I.B.Turksen 1991. Measurement of membership functions and their acquisition. Fuzzy sets and Systems. 40:36-40. [2]North-Holland. R.Knosala & W.Pedrycz. 1992. Evaluation of de-sign alternative in mechanical engineering. Fuzzy sets and Systems. 47:24-28. [3]J.S.Dyer & R.K.Sarin. 1979. Measurable Multi-attribute Value Function. Operations Research  煤層地質條件模糊綜合評價在中國的應用 張東升 張先塵 楊學峰 江蘇徐州中國礦業大學Dszhang123@263.net 摘要：地質條件煤層定量評價采用模糊方法和pointview采煤。根據評價結果，采礦技術決策，采礦規劃與設計，生產管理可以有效地進行。本文介紹是中國的最新事態發展。評價的內容，結構和指標體系等評價因素，隸屬函數和權重的評價因子，評價模型和可靠性是在細節。重點介紹有效應用模糊綜合評價來預測采煤工作面產量?；镜墓ぷ魇侥：C合評價的地質煤層條件，以確保煤礦高效，安全和穩步運行。 關鍵詞：模糊評價;地質條件評價 1、簡介 合理利用煤炭資源意味著用采礦技術水平和相關技術決定適合不同特點和地質條件下的煤。如果評價是遠低于或高于以上的實際地質情況，這對大多數煤炭自然優勢是不利的并容易作出不實的技術決定。因此，地質條件評價和相應的適當采取措施對提高開采效果和經濟效益是非常重要的。 2、目錄模糊評價 基于廣泛調查總結了的煤炭開采經驗和規則，煤層地質條件評價不但應采取的學習選擇煤炭開采技術和采礦業等主要影響因素而且而且還使用采礦理論建設多層次和多因素的綜合評價模型，模糊數學和層次分析法（ AHP法要求短期）等。此外，評價的可靠性中應審議應用評價結果。因此，完整的模糊綜合評價的內容應包括： （ 1 ）調查的經驗和材料的地質條件，煤礦開采技術，技術的影響，以及國家的安全面臨提取典型采區。 （ 2 ）通過總結地質因素的影響，以煤炭開采技術和使用模糊數學方法等，確定評價的結構因素和指標體系的地質因素，隸屬函數和權重的評價因素，建立模糊評價模型。 （ 3 ）根據地質報告劃分煤層成許多較小的塊矩陣度Kij（i煤層號碼， J是塊號碼。 ），并事先采礦評價塊矩陣Kij并獲得前采礦評估價值。 （ 4 ）第二次評估典型塊矩陣Kij已獲得開采價值的評價矩陣P`ij，根據地質報告和地質采礦補充材料'矩陣Pij更適合應用。 （ 5 ）采礦評價前的可靠性分析，矩陣矩陣矩陣Rij =P`ij/Pij（矩陣R是采礦前評價可靠性指標矩陣Kij） ，矩陣R ≤ 1 。 （ 6 ）依據P`ij和Rij制作評價區塊，，評估價值的區塊是：Pij = P`ij× Rij。 （ 7 ）根據其申請和實際要求修改的評價模型或作出新的評價。 3結構和指標體系的評價因素 結構的評價因素反映內涵的評價。它的建立應考慮不僅是一般和特殊困難的地質條件，而且還有系統性，可行性和簡單的評價因素和指標容易獲得的原則。模糊綜合評價在中國根據一般地質條件和地質條件的具體困難評估緩傾斜或傾斜煤層地質條件。在評價一般地質條件包括七個因素的地質構造，煤層厚度，穩定的煤層，音高煤層，頂?shù)装宓拿簩?，煤層硬度和攔截層面。在評價具體困難的地質條件，包括其他四個因素天然氣地質學，水文地質學，煤炭自燃和其他7個因素，除了如上所述。此外，地質結構包含三個基本因素?cái)鄬?，褶皺和巖漿。。穩定的煤層包含三個基本因素多層煤層，煤層變異與帶系數。煤層頂?shù)装宓拿簩影膫€(gè)基本要直接頂，老頂，偽頂和直接底。該區塊的層面包含兩個基本因素的工作面長度和推進長度。因此，有15個基本因素完全考慮煤的煤層厚度，煤層間距和煤層硬度。為了評估15基本因素應選擇合理的定量指標。 4隸屬函數評價性因素 隸屬函數的評價因子是變化的地質因素和開采效果的定量描述的模糊關系。它可使用技術總結，科研成就，統計分析和全面專家經驗，并通過統計分析方法，待定系數法和異構模糊統計方法，等獲得。 圖1 a，b，c和e顯示的隸屬函數，煤層間距，m煤層厚度，l工作面長度，s推進長度，隸屬函數煤層變異系數，minability煤層，，直接頂，老頂，偽頂，直接底，巖漿，見圖1 隸屬函數 這里Fn故障密度，F(xiàn)l是故障長度系數，F(xiàn)h斷層落差系數，q1是褶皺強度系數，q2是褶皺復雜性系數 圖1 隸屬函數評價因素 5評價因素權重 評價因素權重的本質是影響采煤技術的地質因素的相對重要性。要確定評價因素權重應采取采礦法為基礎，并采取之間的相互適應性地質條件和開采技術為主要內容，并應充分利用統計數據，研究成果和專家的經驗。基于知識的專家，層次分析法是最目前使用的。這種方法更適合于評價和解決具體煤層地質條件。表1顯示了通過AHP得到的地質因素權重的層次分析法 6模糊評價模型 6.1優化模型的模糊評價 線性加權綜合評價模型通常用于煤層條件地質模糊評價。近年來，優化模型提出模糊綜合評價，以減少主觀性的評價。其主要特點在于使用兩個基本點的方法。這就是說，在若干塊評價體系中，有一個相應的理想的點良好載體G（ G = （g1,g2……gn） ）和一個相應的反理想點不良載體B（ B= （b1,b2……bn） ）,假設該綜合評價值Ri (Ri = (r11, r22, ┄r1m) 是 μi，然后計算廣義距離D(Ri, G) 和 D (Ri, B).。如果考慮所有樣本的平方和加權距離為最優標準，最佳的解決方案的綜合評價值是： 6.2特別困難的條件下綜合評價模型 基于上述模糊評價，特殊困難地質條件的綜合評價模型，煤層建立困難系數D。D的更大的價值是比較困難的地質開采條件。因?yàn)檎麄€(gè)評價應該體現個人的影響因素。連續乘法時必須通過結構模型。就是D =1- B× P, 這里B是評估價值的特殊地質條件， P是評估價值一般地質條件。 圖2評估值之間的關系和可靠性 7可靠性模糊評價 圖2顯示的特點，可靠性，采礦前評價的基礎上，預先采礦和在開采的評估和計算可靠性的評價12采礦區和107個典型的煤煤層區塊。采礦前評價具有更大的價值，更好的煤層條件，并更高的可靠性。相反，減少采礦前評價是具有最嚴重的煤層條件和較低的可靠性。不同煤層區塊信度的評價不同，但是他們總是在整體范圍內組成指數函數的雙包絡線R1和R2中。適當?shù)闹档腞應選擇修改該值的P '，同時評價新區塊。 8預測工作面產量 在某些條件下的設備，技術和管理的煤礦，采煤工作面產量和地質條件之間存在著密切的關系。 通過模糊評價煤礦地質條件和統計分析生產技術指標，采煤工作面產量和模糊綜合評價值的關系之間的都可以建立在一個新的預測采煤工作面產量模式下。有很多預測模型的線性方程，對偶二次方程和指數方程等，例如： a =C1+ C2 P（綜采開采技術） a =D（C1+ C2 P + C3 P2）（綜或常規機械化采煤技術） a = D（ C1+C2P+C3P2+C4P3）（爆破采煤技術） a = 24.5(1.13 +1.24 ln P) （在南屯煤礦綜采開采技術） a = (14.66lnM - 6.77)(1.28+1.4ln P) （東灘礦綜采放頂煤技術） 其中D是困難系數，的C1 ， C2 ，C3 ，和C4是統計回歸常數。 參考文獻 [1] IBTurksen 1991年,隸屬函數的測量和采集。模糊集與系統, 40:36-40 ,北荷蘭。 [2] Knosala與美國Pedrycz 1992年,評價日簽署替代機械工程,模糊集與系統,47:24-28 。 [3] JSDyer ＆ RKSarin , 1979年,衡量多屬性值函數,運籌學。  設計題目：丁集礦井1.8Mt/a新井設計 設計專題題目：煤礦沖擊礦壓 摘 要 本設計包括三個部分：一般設計部分、專題設計部分和翻譯部分。 一般部分針對淮南丁集礦井進行了井型為1.8 Mt/a的新井設計。丁集礦井位于安徽省淮南市境內，交通較為便利。井田走向長約7.0 km，傾向長約5.5km，面積約48 km2。主采煤層為11-2#煤層，平均傾角5~6°，平均厚度3.49 m。井田工業儲量為234.9Mt，可采儲量175.6 Mt，礦井服務年限為75.02 a。礦井正常涌水量為180m3/h，最大涌水量為220m3/h；礦井相對瓦斯涌出量為5.79 m3/t，屬低瓦斯礦井。 根據井田地質條件，設計采用雙立井單水平開拓方式，井田采用帶區采區式布置方式，共劃分為七個帶區和兩個采區，軌道大巷、膠帶機大巷皆為巖石大巷，布置在11-2#煤層底板巖層中?？紤]到本礦井為低瓦斯礦井，礦井通風方式采用兩翼對角式通風，并在開采前預掘底板瓦斯抽排巷進行瓦斯提前卸壓抽放。 針對東一帶區采用了帶區準備方式，共劃分8個分帶工作面，并進行了運煤、通風、運料、排矸、供電系統設計。 針對11201工作面進行了采煤工藝設計。該工作面煤層平均厚度為3.49 m，平均傾角5°，直接頂為的碳質泥巖，老頂為粉砂巖。工作面采用長壁綜采一次采全高采煤法。采用雙滾筒采煤機割煤，往返一次割兩刀。采用“三八制”工作制度，截深0.8m，每天六個循環，循環進尺4.8m，月推進度144 m。 大巷采用膠帶輸送機運煤，輔助運輸采用蓄電池式電機車牽引固定箱式礦車。主井采用兩套帶平衡錘的16t箕斗提煤，副井采用一對1.5 t礦車雙層四車窄罐籠和一個帶平衡錘的1.5 t礦車雙層四車寬罐籠運料和升降人員。 專題部分題目是《煤礦沖擊礦壓》，翻譯部分題目為《Fuzzy evaluation on geological conditions of coal seam in China》，主要介紹了現行數值模擬實驗中巖體特性參數的選取依據及在工程現場的應用。 關鍵詞：丁集礦井；雙立井；帶區布置；綜采大采高；兩翼對角式；軟巖巷道；礦壓觀測 ABSTRACT This design can be divided into three sections: General design, Monographic study and Translation of an academic paper. The general design is about a 1.80 Mt/a new underground mine design of Dingji coal mine. Dingji coal mine is located in Huainan, Anhui province, and the traffic is quite convenient. It’s about 7.0 km on the strike and 5.5 km on the dip, with the 48.0 km2 total horizontal area. The minable coal seam is 11-2# with an average thickness of 3.49 m and an average dip of 5°. The proved reserves of this coal mine are 234.9 Mt and the minable reserves are 175.6 Mt, with a mine life of 75.02 a. The normal mine inflow is 180 m3/h and the maximum mine inflow is 220 m3/h. The mine gas emission rate is 5.79 m3/t which can be recognised as low gas mine. Based on the geological condition of the mine, this design uses a two-shaft single-level development method, Ida-style layout with full band mode, divided into 8 bands total, track roadway, belt conveyor roadway and return airway are all rock roadways, arranged in the floor rock of 11-2# coal seam. Taking into account of the low gas emission, mine ventilation method use two diagonal wings ventilation, and excave bottom gas drainage roadway before mining to relief gas pressure in advance. Designed first mining district makes use of the method of the band mode preparation, the length of working face is 240 m, which uses fully-mechanized coal caving mining methods. The working system is “three-eight”which produces 330 d/a. Main roadway makes use of belt conveyor to transport coal resource, and battery locomotive to be assistant transport. The monographic study entitled "Case Study and Research of Deep Soft Rock Pressure Observation", The title of the translated academic paper is “Fuzzy evaluation on geological conditions of coal seam in China ”. Keywords:Dingji coal mine;double vertical shaft; band mode; large mining height; two diagonal wings ventilation; soft rock roadway; pressure observation 目 錄 一般部分 1 礦區概況與井田地質特征 1 1.1概況 1 1.1.1地理位置與交通 1 1.1.2地形地貌及水系 1 1.1.3 氣象及地震 1 1.1.4 礦井開發情況 2 1.2井田地質特征 3 1.2.1地層 3 1.2.2構造 4 1.2.3 水文地質特征 4 1.3煤層 5 1.3.1煤層 5 1.3.2煤質、煤類與煤的用途 5 1.4開采技術條件 6 1.4.1礦井涌水 6 1.4.2煤層頂?shù)装鍘r性特征 8 1.4.3煤層瓦斯 9 1.4.4地?zé)?9 2 井田境界和儲量 11 2.1井田境界 11 2.1.1井田邊界 11 2.2礦井工業儲量 11 2.2.1礦井儲量計算基礎 11 2.2.2礦井地質儲量計算 11 2.2.3礦井工業儲量計算 11 2.3 礦井可采儲量 12 2.3.1井田邊界煤柱 12 2.3.2工業廣場煤柱 12 2.3.3斷層保護煤柱 13 2.3.4大巷保護煤柱 13 2.3.5礦井可采儲量 13 3 礦井工作制度、設計生產能力及服務年限 14 3.1礦井工作制度 14 3.2礦井設計生產能力及服務年限 14 3.2.1礦井設計生產能力確定依據 14 3.2.2礦井設計生產能力 14 3.2.3礦井的服務年限 14 3.2.4井型校核 15 4 井田開拓 16 4.1井田開拓的基本問題 16 4.1.1確定井筒形式、數目、位置及坐標 16 4.1.2主、副井井筒位置的選擇 17 4.1.3工業廣場的位置、形狀和面積的確定 18 4.1.4開采水平的確定及井田的再劃分 18 4.1.5主要開拓巷道 18 4.1.6井田開拓方案提出與比較 19 4.2 礦井基本巷道 23 4.2.1井筒 23 4.2.2開拓巷道 26 4.2.3井底車場及硐室 28 4.2.3巷道支護 29 5 準備方式——帶區巷道布置 32 5.1煤層地質特征 32 5.1.1帶區位置 32 5.1.2帶區煤層特征 32 5.1.3煤層頂?shù)装?32 5.1.4水文地質 32 5.1.5地質構造 32 5.1.6煤層瓦斯 32 5.1.7煤塵和自燃 33 5.1.8地表情況 33 5.2 帶區巷道布置及生產系統 33 5.2.1帶區準備方式的確定 33 5.2.2帶區巷道布置 33 5.2.3帶區生產系統 34 5.2.4帶區內巷道掘進方法 35 5.2.5帶區生產能力及采出率 35 5.3帶區車場選型設計 36 5.3.1帶區下部車場 36 5.3.2帶區煤倉 37 5.3.3帶區變電所 37 6 采煤方法 38 6.1采煤工藝方式 38 6.1.1帶區煤層特征及地質條件 38 6.1.2確定采煤工藝方式 38 6.1.3回采工作面參數的確定 39 6.1.4回采工作面采煤機、刮板輸送機選型 39 6.1.5回采工作面支護方式 41 6.1.6端頭支護及超前支護方式 43 6.1.7各工藝過程注意事項 44 6.1.8回采工作面正規循環作業 45 6.2首采工作面巷道布置 47 6.2.1回采巷道布置方式 47 6.2.2回采巷道參數 47 7 井下運輸 49 7.1概述 49 7.1.1礦井設計生產能力及工作制度 49 7.1.2運輸距離和貨載量 49 7.1.3礦井運輸系統 49 7.2帶區運輸設備選擇 50 7.2.1設備選型原則 50 7.2.2帶區運輸設備選型 50 7.2.3帶區運輸設備能力驗算 52 7.3大巷運輸設備選擇 53 8 礦井提升 55 8.1概述 55 8.2主副井提升 55 8.2.1主井提升 55 8.2.2副井提升 57 9 礦井通風及安全 58 9.1礦井通風系統的選擇 58 9.1.1礦井通風系統的基本要求 58 9.1.2礦井通風系統的確定 58 9.1.3采區通風系統的確定 59 9.2礦井風量計算 60 9.2.1通風容易時期和通風困難時期采煤方案的確定 60 9.2.2各用風地點的用風量和礦井總用風量 63 9.2.3風量分配及風速驗算 66 9.2.4通風構筑物 67 9.3礦井通風阻力計算 67 9.3.1計算原則 67 9.3.2礦井最大阻力路線 68 9.3.3礦井通風阻力計算 68 9.4選擇礦井通風設備 72 9.4.1選擇主要通風機的基本原則 72 9.4.2通風機風壓的確定 72 9.4.3主要通風機工況點 74 9.4.4 主要通風機的選擇及風機性能曲線 74 9.4.5電動機選型 77 9.5安全災害的預防措施 77 9.5.1預防瓦斯和煤塵爆炸的措施 77 9.5.2預防井下火災的措施 78 9.5.3防水措施 78 10 設計礦井基本技術經濟指標 79 參考文獻 80 專題部分 煤礦沖擊礦壓 81 翻譯部分 FUZZY EVALUATION ON GEOLOGICAL CONDITIONS OF COAL SEAM IN CHINA 98 煤層地質條件模糊綜合評價在中國的應用 104 致 謝 108