附 錄 1汽車車身總布置采取以人為中心的設計思想，尤其是在轎車設計中，確保駕駛員與乘員的舒適性、居住性、上下車方便性、安全性以及駕駛員的操縱方便性和視野性等其應遵循一定的設計原則：外部尺寸盡量小、內部空間盡量大、滿足各項功能要求、滿足人機工程學要求、滿足標準法規及技術條件要求。人機工程學是上世紀 50 年代發展起來的一門新學科。它以人-機關系為研究的對象，以實測、統計、分析為基本的研究方法，是一種描述如何塑造適宜人的工作環境的科學。具體到產品開發，就是在產品的設計和制造方面要按照人體的生理解剖功能量身定做，更加適合于人體的工作效能。今天的汽車要追求“人車合一” ，就是設計汽車的目標要以人為本，圍繞人的需求而建造。要使人駕乘汽車感到舒適、方便和不易疲勞，這就是汽車人機工程學的目的。汽車設計以總體布置為核心，而轎車總體布置又是從車廂開始的。為此，要利用能表述人體形狀的標準模型作為準繩來安排駕駛艙各個部件位置。例如駕駛員的位置，從腳踩油門踏板上算起，身材高大者要比身材矮小者靠后坐，這決定了駕駛座椅后移的位置；身材矮小者要比身材高大者靠前坐，這決定了座椅前移的位置。手臂長度與腿相比是較短的，當座椅后移時可能手觸及不到儀表板，這就有了一個范圍限制。例如以百分位人群來劃分，假設第 5 個百分位的女子身高為 1.47 米，而第 95 個百分位的男子身高為 1.82 米，對于固定踏板的布置，工程師就只考慮 5%的矮小女子和 95%高大男子的手臂觸及范圍。做出儀表板的可接觸的衡量，通常以高大男人的手臂長為一個決定性準則，即以伸展的手臂運動，在水平及垂直方向上各繪出一個圓弧線，近似描繪出一個半圓形空間去安排座椅、儀表、方向盤、踏板、變速桿、中控板控制旋鈕等零部件的位置及相互的距離尺寸。人機工程學,在美國稱之為人類工程學(Human Engineering)、人因工程學(Human Factors Engineering)，在歐洲有人稱之為功效學(Ergonomics)，日本稱之為人間工學。而我國目前除使用上述名稱外，還譯成宜人學、人機工程學等。人機工程學的命名已經充分體現了該學科是“人體科學”與“工程技術”的結合,實際上,這一學科就是人體科學、環境科學不斷向工程科學滲透和交叉的文化產物。人機工程學就是研究人在一定的工作環境中所涉及的解剖學、生理學、心理學等諸方面因素,研究人-機(物)-環境系統中的交互作用著的各組成部分(效率、健康、安全、舒適等)，在具體的工作條件下，在家庭中和在休假的環境里,如何達到最優化的問題。國外對汽車人機工程學的研究起始于上世紀五十年代，并且已經做了大量的測繪分析和基礎性研究工作，尤其是美國提出了很多推薦性標準，有的已被國際標準組織所采用，如三維 H 點人體模型、眼橢圓等。國外汽車設計行業對于人機工程的應用極為重視，如日本、美國等在設計新車型時都要做相應的人機工程檢查和校核，并且抽取不同的人群進行主觀評價。德國汽車業聯合開發的 RAMSIS 軟件，建立了詳細的三維人體模型，從德國、日韓、中國到 SAE 等并提供各種年限參考，用戶還可以根據自己的數據建立自己的三維人體模型。在國外，已建立起了一個較為完整的設計開發流程和評價標準。在中國，人機工程學的研究在 20 世紀 30 年代開始即有少量和零星的開展，但系統和深入的開展則在“文革”以后。1980 年 4 月，國家標準局成立了全國人類工效學標準化技術委員會，統一規劃、研究和審議全國有關人類工效學的基礎標準的制定。1984 年，國防科工委成立了國家軍用人-機-環境系統工程標準化技術委員會。這兩個技術委員會的建立，有力地推動了我國人機工程學研究的發展。此后于 1989 年又成立了中國人類工效學學會，并且 1995 年 9 月創刊了學會會刊《人類工效學》季刊。20 世紀 90 年代初，北京航空航天大學首先成立了我國該專業的第一個博士學科點，隨后南京航空航天大學、西北工大、北京理工大學、北大醫學部等大學也先后成立了相應的專業。我國人機工程學的研究起步比較晚，但也做了一些基礎性工作如對人體尺寸的測量統計和分析等。這些都對中國人機工程學的研究起到了一些推動作用，但我國的人體測量數據沒有隨著時間的變化和社會的發展得到及時的更新。在 GB10000-1988 中的某些數據已經不適合當今社會人體尺寸的實際情況，并且還缺少一部分數據，不能構成一個完整的人體，因此我國的人體工程學研究還有待于更加進一步的深入和發展。我國的大部分汽車行業依舊沿用傳統的設計方法，雖然在硬件條件上已經實現了 CAD，但大部分的 CAD 軟件由于各方面原因的限制沒有真正發掘 CAD 巨大潛力以提高設計開發效率。另一方面雖然國內的一些大學、科研院所和企業經過數年的研究和積累工作已經形成了一套完整的汽車車身內部布置理論和方法，但是由于缺少相關的交流合作，大部分研究開發成果不能實現共享，所以造成了一定程度上的人力、物力等資源上的浪費，不利于國內汽車行業整體水平的快速提高。國內人機工程方面，建議今后科研院所及生產企業聯合起來進行如下的一些工作：進行人體尺寸測量數據的統計工作，更新相關標準數據，以此為基礎，進行統計分析，建立標準的中國人體模型數據庫，從而在進行整車開發時，可用到中國人體百分位的模板，這是基礎性的工作；建立并完善相關的標準，建立一個完善的設計流程及相應的設計推薦值；聯合開發并完善一個實用的評價軟件及評價標準，盡最大可能地實現共享，或者引進國外成熟軟件；培養一些進行主觀評價的人員等等。哈爾濱工業大學華德應用技術學院畢業設計（論文）4附 錄 2The body of a motor car always fixes up and adopts the design philosophy that regards people as the centre, especially in the car design, guarantee the comfortableness of driver and passenger, he should follow certain design principle for livability, getting on or off the bus in the convenience, security and driver's manipulation convenience and visual field,etc.: External size try hard little, internal space try hard heavy meeting every functioning requirementing, meeting man-machine engineering requirement, meeting standard regulationing and technological terms requirementing. Man-machine engineering is a new discipline developed in the fifties of last century. It regards people - machine relation as the target of studying, regards surveying, counting, analyzing as the basic research approach, science how to mould the working environment of the suitable person that it is a kind of description. Reach product development specifically, even if in design and manufacture of the products yes made to measure according to the physiological dissection function of the human body, suitable for the working efficiency of the human body more. The car of today will be pursued “ People unifies car “ ,Goal to design car take people first, demand and construction to centre on people. Will make people feel comfortable, convenient and difficult to be tired to drive by bus, this is the purpose of man-machine engineering of car. The car is designed by fixing up overallly for the core, and the car fixes up overallly begin from the carriage. For this reason, should utilize the standard model that can state the human form to come to each part position of arrangement cockpit as the criterion. Position on it is driver,it step on since foot gas pedal cases worthwhile is the large than short and small by after sit, this position that has determined to drive the seat and move backward; It is the short and small than large by before 哈爾濱工業大學華德應用技術學院畢業設計（論文）5sit,determine this by position that seat move. Compared with leg the arm length is shorter, perhaps hands can not touch the instrument board when the seat move backward, this has a range to limit. For example divide with the hundredths crowd, suppose the woman's height of 5th hundredths is 1.47 meters, and the man's height in the 95th hundredths is 1.82 meters, arrangement to the fixed footboard, the engineer only considers 5% of the short and small women and arm of 95% of the tall and big men touch the range. Make instrument board's and contact's measurement, a decisive criterion with tall and big arm of man usually, move with the arm spreading, draw a round arc in the horizontal and vertical direction respectively, depict first semi-circular space to arrange for the seat approximately, instrument, steering wheel,footboard, gearshift lever, in accuse of for the position and mutual distance sizes of spare partses such as knob,etc Man-machine engineering, call that the ergonomics (Human Engineering) in U.S.A., people, because of engineering (Human Factors Engineering) ,Study (Ergonomics) in the European efficiency that someone calls that ,An engineering of attitude towards life which Japan calls. And our country also translates into pleasant studying, man-machine engineering,etc. besides using name described above at present. The name of man-machine engineering has already fully reflected this discipline is “ Human science “ With “ engineering “ Combination,in fact, this discipline science, environmental science, constantly project culture result where science permeate and crosses human. Study all people's respect factors such as anatomy, physiology, psychology involved in certain working environment in man-machine engineering, study people - machine (thing) -Every component (efficiency of reciprocation of environmental system, healthy, safe, comfortable) ,Under the concrete condition of work, in the family and in the environment of having a holiday, problem of how to reach and is optimized most. The foreign study on man-machine engineering of car originates in the fifties of last century, and has already made a large amount of survey and drawing analyzing and basic research work, especially U.S.A. has proposed a lot of recommendatory 哈爾濱工業大學華德應用技術學院畢業設計（論文）6standards, some have already been adopted by ISO(International Standards Organization), for instance three-dimensional H some dummies, eyes are oval. The foreign car designs the trade to extremely pay attention to the application of the ergonomic, for instance Japan, U.S.A.,etc. will do the corresponding ergonomic to check and check while designing the new style, and collect different crowds and carry on subjective appraisal. RAMSIS software which the German car industry developed jointly, has set up detailed three-dimensional dummy, offer, consult various service life from Germany, Japan and Korea S., China to SAE,etc., user can also follow one's own data set up one's own three-dimensional dummy. Abroad, have already set up a comparatively intact design and developed the procedure and evaluation criterion. In China, the research of man-machine engineering began in the 1930s there were a small amount of and fragmentary development promptly, but the system and deep development are here “ The Culture Revolution “ Later. In April of 1980, the national standardized technical committee of human ergonomy was established in National Bureau of Standards, plan, study and review the formulation of the national basic standard about human ergonomy in unison. In 1984, - the machine - environmental standardized technical committee of system engineering was established the national army to choose the right person in the Commission of Science, Technology and Industry for National Defence. Setting-up of these two pieces of technical committee, development promoting man-machine engineering of our country to study effectively. Establish China learn by human ergonomy on 1989 hereafter, start publication, learn proceedings “ human ergonomy “ quarterly will it be September 1995. At the beginning of 1990s, Beihang University established the discipline of first doctor that our country should be specialized to click at first, Nanjing Aero-Space university, northwest worker heavy, Beijing Institute of Technology subsequently, Peking University medical department,etc. university establish corresponding speciality successively even. Of our country man-machine research of engineering start, late, make if some basic work count and analyze etc. to human measurement of size too. All these study on 哈爾濱工業大學華德應用技術學院畢業設計（論文）7Chinese man-machine engineering has played some impetuses, but the human measurement of our country has not got prompt renewal with the development of change and the society of time. Already unsuitable nowadays actual conditions of the social human size of some data in GB10000-1988, and lack some data, can't form an intact human body, so study and await more further deepening and development in human engineering of our country. Most cars trades of our country still continue to use the traditional design method, though has already realized CAD on the hardware condition, but most CAD software does not as really explore CAD enormous potentiality and design the efficiency of developing in order to improve because of the limitations of reasons of various fields. On the other hand though some domestic universities, scientific research institutions with enterprise work, form an intact body of a motor car assign theory and method already research and accumulation for several year, But because lack relevant exchange and coorperation, the majority can't be realized sharing while researching and developing the achievement, so has caused waste on the resource such as the manpower, material resources to a certain extent, unfavorable to the improving fast of domestic car trade integral level. Domestic ergonomic respect, propose the scientific research institutions and manufacturing enterprise will joint together the following some work in the future: Carry on the statistical work of the human size measurement, upgrade relevant standard data, based on this, carry on statistical analysis, set up standard Chinese dummy database, thus while developing the completed car, can use the template in the human hundredths of China, this is basic work; Set up and improve relevant standards, set up a piece of complete design procedure and corresponding design giving a recommendation value; Develop jointly and improve a practical appraisal software and evaluation criterion, spare no effort to realize sharing, or introduce the foreign ripe software; Train some personnel who carry on subjective appraisal,etc. 哈爾濱工業大學華德應用技術學院畢業設計（論文）6