電器蓋注塑模具設計【含CAD圖紙+三維UG+文檔】,含CAD圖紙+三維UG+文檔,電器,注塑,模具設計,cad,圖紙,三維,ug,文檔 English translation in injection mold Abstract: According to the requirements of the plastic products, understand the use of plastic parts, technical requirements, analysis of dimensional accuracy and other technical considerations of plastic parts, plastic parts size. We used a mold two cavity, the side gate, injection machine uses the Haitian 110X 1A models, equipped with a cooling system, CAD and UG drawing two-dimensional assembly drawing and parts drawing, choose the reasonable processing method of mould. Attach a statement, the systematic use of a brief text, analysis and calculation of plastic parts and concise, so as to make reasonable mold design. Key Words：Mechanical design;?mold design;?CAD?UG to draw the?3D?drawing two-dimensional map. 1、Introduction Many types of mold, the structure and varieties of plastic, plastic injection molding machine and the complexity of the types and other factors, its basic structure is composed of the movable mould and the fixed mould is composed of two parts. The fixed mould part arranged on the fixing plate of the machine, dynamic part is installed in the mobile injection molding machine, in the injection molding process with the clamping system of injection molding machine's movement. Part of mold and die part guided by a guide post and a closed dynamic injection molding. General injection molding parts, the clamping mechanism, gating system, side parting and core pulling mechanism, pushing mechanism, a heating and cooling system, exhaust system and the supporting parts. At present, the mould manufacturing technology in China has been from the past can only make simple mold to mold can produce large, sophisticated, complex, long life. In the plastic mold design and manufacturing, to bumper and the whole panel of large injection mold. With the rapid development of computer technology, the mold design and manufacturing technology is moving in the direction of the development of digital. On the one hand, the domestic market will continue to mold growth; on the other hand, mold manufacturing is gradually transferred to China and the multinational corporations to China's purchases tend to die is also very obvious. China's economy is still in a stage of rapid development, the international development trend of economic globalization is increasingly obvious, which provides good conditions and opportunities for the rapid development of mold industry in our country. 2、 Mold-Filling Simulation 2.1 Calculation of the interface locations The mold filling velocity and the shape of the melt front in LFC are quite different from those in the conventional empty mold casting．The velocity at the melt front is restricted by the foam degradation，gas elimination，pressure building-up in the mold，etc，and ．1t is affected by the original process parameters，such as the vacuum degree，the pattern density and the metallic static head ． The melt—pattern interface develops in a radiate manner．Due to the foam degradation caused by the heat transfer between the molten metal and the foam pattern in LFC．The influence of the gravity on the mold filling velocity and the interface morphology in LFC is minor compared with that in the conventional empty mold gravity casting[5 ~7]． According to the mechanism of the melt front movement during the mold filling process of LFC．the artificial neural network technique is proposed to calculate the locations of the melt—pattern interface． The whole casting(including the gating and feeding system) is meshed into the cubic cells of appropriate size．Each cell is regarded as a neuron and can be in one of three states during the mold filling, empty, interfacial or ful1. A neural network is formed through the interconnecting links between the cells，in which each cell is connected only to its neighboring cells and has no connections to the others．The architecture of the network is similar to the cellular neural network (CNN)in the way of cell connecting，I,E, with locally interconnecting linkage and pre-designed link values(weights)．According to the mode of linkage，each cell except for the cell located at the boundary of the casting is connected to its 26 neighboring cells． Let C(i，j，k)denote a cell and Nr(i，j, k)the aggregation of ceils connected to C(i，j，k)，then： From the initial time t0，each cell of the network changes its state of activation at the end of every time interval Δt according to its activation function an d produces an output value of 1 or 0．For a time intervaleach cell accepts the outputs from the 26 neighboring cells as its input．Using a 26-dimeusional vector to denote the input of C(i，j ，k)，the components of the vector are： in which， is the output of C(l，m，n)and represents the distance of interface movement from C(l，m，n)to the un-filled cell C(i，j，k)in the time interval of At with unit velocity． The summed input of the un-filled cell c(i，J，k)is： where， is the input function and represents the 26_dimensional weight vector．Each component of the weight vector is set according to the velocities of the neighboring cell and their relative of nations．that is： where， denotes the relative orientation to the neighboring cells，and ， is the evaporating velocity of the foam pattern at the corresponding location．From the related experimental study it has been found that is determined by the process parameters of the metallic static head h，the vacuum degree ，the pattern density d，the pouring temperature and the factor of coating property For this specially designed network，the operation 0f the input function is to calculate the relative interface moving distances from the neighboring cells to cell C(i,j,k).The detailed calculation process is as follows: (1)By multiplying the corresponding components of the input vector and weight vector，a new 26-dimensional vector is obtained，and the accumulation of the components of the new vector with time is： And ，when C(i，J，k )is empty． (2)By summing the two components of vector ，m，along which the filling directions confront with each other，a 13-dimensional vector is obtained： Let then，the states of activation of the cells are defined as: when ，k=0，C(i，j，k )is an empty cell； when ，j， ≥0，C(i，j，k )is a full cell； when ， <0，C(i，j，k)is an interface cel1． The output of the neuron is a threshold function： where is the threshold value of the neuron and it equals to the side length of the meshed cel1． Fig．1 Flow chart of LFC mold filling solution procedure The algorithm was realized by C++ computing language，as its computation flow chart shown in Fig．1、At the beginning of the calculation．The cells in the top layer of the meshed sprue of casting were set to be fu11 (if the sprue was hollow，all the cells between the top layer of sprue and the ingate were set to be ful1)．According to the calculation process，all the cells would be full after filling for a certain time, and the system would be stable. 2.2 Calculation on the fluid flow and temperature distribution during mold filling According to the above solution algorithm，the locations of melt—pattern interface at any moment are obtained． So the fluid flow and the temperature distribution during the mold filling can be calculated by solving the N—S equation and the energy equation within the known computational domain． The governing equations are expressed as the following general form ： where φ is a dependent variable，Γrepresents the diffusion coefficient and S is the source term．The equation represents the continuity equation，the N—S equation or the energy equation，when the dependent variable is 1，uj, or T，respectively．For a certain φ，there are correspondingΓ and S． SOLA technique was applied to calculate the fluid flow in the N—S equation．The velocity boundary condition at the melt—pattern interface in LFC is different from that at the free surface in the conventional empty mold casting．In the lost foam casting ，the melt front velocity is restricted by the evaporating velocity of the foam pattern．So the melt front velocity could be set as the evaporating velocity of the foam pattern，and the direction is determined according to the relative orientation between the molten metal and the foam pattern．For a full cell C(i，j，k )，for example，if the output value， is 0，then the boundary velocity can be set as :． The temperature boundary condition at the melt front in LFC is also quite different from that in the conventional empty mold casting．In the lost foam casting，the melt front is remarkably chilled due to the evaporation an d the decomposition of the foam pattern．Generally ,so me researchers used an equivalent heat transfer coefficient to deal with the chilling effect ．In this paper ,the boundary condition is treated by giving the relationship between the heat flow an d the time at the interface． 3、Check the stiffness and strength of die Die strength of common sense in mold strength, stiffness. Requirements of various molding parts and components have the strength, the stiffness of the die, enough strength can ensure mold can work normally. Because the mold form is more, the calculation is different and more complex, in actual production, using the method of experience design and strength check of the combination of the strength check, adjust the design, to ensure the normal work of the mould can be. Die strength calculation is relatively complex, generally use the simplified calculation method, to take a conservative approach, the calculation principle is: select the most unfavorable loading structure, selection of safety coefficient, and then optimizing the structure of the mold, improve the mold strength. In order to ensure that the mold can work normally, the overall strength is not only to check the mold, to check the strength of the local structure of die. The overall strength of the main for the cavity wall thickness, cavity thickness of base plate, several pressure mold surface can bear, the actual choice of size should be larger than the size and integral calculation. Check the strength and bending from the two aspects of calculation, select a larger size. 4、Design and calculation of cooling system Mold temperature have influence on the mold filling of plastic melt flow, solidification, the production efficiency and the product's shape and size precision, for any plastic products, mold temperature fluctuation is negative. The mold temperature is too high will make the plastic deformation occurs in the release, to extend the cooling time and make the productivity decline. Mold temperature too low will reduce the flow of plastic, making it difficult to filling, increased stress products and obvious weld marks. Due to the requirements of performance and process all kinds of plastic, the mold temperature requirements are not the same. Plastic powder injection to the general mold temperature, melt solidified into the plastic parts, reduce the mold, mold temperature from the left and right are dependent on the cooling water inlet in the mold, the heat away. For the requirement of low temperature (less than) plastic, only need to set up the cooling system can be, because can be adjusted by the flow of water to adjust the mould temperature 5、Conclusions The mold design project, through the analysis of plastic parts of the process, determine the overall design of the mold, and the design of each subsystem. The design of the mould can meet the quality requirements of the working state, the use of safe and reliable, easy to repair, a molding cycle is short in injection molding, forming a long service life, reasonable mould manufacturing process. Through the above work, I on a mold from design to the whole process of knowledge are clear and intuitive, understanding the working principle of injection mold, with the experience and knowledge will determine the design and accuracy of the main parts of the die cavity and so on, can be a reasonable solution to the problems in the design of the mould often appear the proposed, to select the injection molding machine, mold, determine the structure and size of the cavity number, the choice of parting surface, gating system design, core pulling mechanism etc.. Due to the lack of knowledge and experience, in the design process to determine the machining accuracy of parts, there are still many shortcomings, still need to be improved in the future work, study. References [1] Chen Xiaokang, Zhou Xinglong. Practical Mould Technology Handbook [M]. Beijing: China Light Industry Press, 2001 [2] Peng Jiansheng. Mold design and Processing Handbook [M]. Beijing: Mechanical Industry Press, 2005 [3] Shen Kai Chi. Plastic mould [M]. Beijing: China Light Industry Press, 2002 [4] Liu Shouyong machinery manufacturing technology and machine tool fixture [M]. Beijing: Mechanical Industry Press, 2000 [5] Zhang Zheng. Die manufacturing technology [M]. Beijing: Publishing House of electronics industry, 2002 [6] Ding Wen. The utility of plastic mold design manual [M]. Xi'an: Xi'an Jiao Tong University press, 1993 [7] Li Zhigang, Xia Ju Chen. China Mold Design Canon [M]. China society of mechanical engineering, 2003 [8] pan Baoquan. Die manufacturing technology [M]. Beijing: Mechanical Industry Press, 2004 [9] Wang Boping, interchangeability and measurement technology [M]. Beijing: Mechanical Industry Press, 2002 [10] Li Yimin. Mechanical manufacturing process design handbook [M]. Beijing: Mechanical Industry Press, 1993 [11] Li Yuncheng. Die manufacturing technology [M]. Beijing: Mechanical Industry Press, 2002 [12] Huang Chengju, Li Eqin. Reverse engineering project training tutorial [M]. Beijing: Publishing House of electronics industry, 2004 [13] Liu Yanguo, Yan Huiping. The quantity of injection molding cavity of the selection of [J]. electromachining & mould, 2006 [14] Wilson, F.W.Die Design Handbook MaGraw Hill 1990.6 [15] Q.C.Li, Z.Huang.Mobility Analysis of a novel 3-5R Parallel Mechanism Family.DOI: 10.1115/1.1637651 注塑模中英文翻譯 摘要：根據塑料制品的要求，了解塑件的用途，分析塑件的工藝性、尺寸精度等技術要求，考量塑件制件尺寸。本模具采用一模兩腔，側澆口進料，注射機采用海天110X 1A型號，設置冷卻系統，CAD和UG繪制二維總裝圖和零件圖，選擇模具合理的加工方法。附上說明書，系統地運用簡要的文字，簡明的示意圖和和計算等分析塑件，從而作出合理的模具設計。 關鍵詞：機械設計；模具設計；CAD繪制二維圖；UG繪制3D圖。 1 、介紹 注塑模的種類很多，其結構與塑料品種、塑件的復雜程度和注塑機的種類等很多因素有關，其基本結構都是由動模和定模兩大部分組成的。定模部分安裝在注塑機的固定板上，動模部分安裝在注塑機的移動模板上，在注射成型過程中它隨注塑機上的合模系統運動。注塑成型時動模部分與定模部分由導柱導向而閉合。一般注塑模由成型零部件、合模導向機構、澆注系統、側向分型與抽芯機構、推出機構、加熱和冷卻系統、排氣系統及支承零部件組成。 目前，我國的模具制造技術已從過去只能制造簡單模具發展到可以制造大型、精密、復雜、長壽命的模具。在塑料模具方面，能設計制造汽車保險杠及整體儀表盤大型注塑模。隨著計算機技術的發展應用，模具設計與制造技術正朝著數字化方向發展。一方面，國內模具市場將繼續高速發展；另一方面，模具制造也逐漸向我國轉移以及跨國集團到我國進行模具采購趨向也十分明顯。我國經濟仍處于高速發展階段，國際上經濟全球化發展趨勢日趨明顯，這為我國模具工業高速發展提供了良好的條件和機遇。 2、模具充模仿真 2.1界面定位的計算 在消失模鑄造中, 模具充模的速度和熔化前面的形狀與傳統空模鑄造是十分不同的.在模具中, 熔化前面的速率受到泡抹降解,天然氣揮發和應力集中等等的限制。它還受到源工藝參數的影響,例如真空度,模型密度和金屬的靜止端,熔化模式的界面是按放射模式展開的。在消失模鑄造中，由于泡沫降解導致熱量在熔融金屬與泡沫之間傳遞。在消失模鑄造中，模具沖模速率與界面形態學相對與傳統的空模具重力影響是很小的。根據熔融前面的運動機理，在消失模鑄造過程中，人工神經網絡技術很可能計算出熔融形式界面的定位。 整個鑄造（包括開啟和進給系統）結網成恰當形式的的立方單元。每個單元被認為是一個神經元，在模具沖模中處于三種狀態，空的，接口的，滿的。通過單元之間的內部連接，一個神經網絡就形成了，其中每個單元只是與它相鄰的單元相連，不與其它的單元相連。在單元連接形式上，通過固定的連接鏈和預定的設定鏈連接重力。由于模型的收縮率，除了固定在鑄模邊緣的單元，每個單元都與26維相鄰單元連接。 如果C(i，j，k)代表一個單元，Nr(i，j, k)代表連接C(i，j，k)的單元，那么： 從開始時間T0，根據它的活動功能和產生1或0的量，在相距一定的時間間隔下，每個網絡單元改變它的活動狀態。在相距一定的時間間隔下，每個單元連接26維相鄰單元的輸出量作為輸入量。用這26維矢量來表示C(i，j，k)的輸入量，其矢量式是： 在這里，是C(l，m，n)的輸出量，在單位速度相同的時間內，代表了界面運動從C(l，m，n)到未填充的C(i，j，k)的距離。 總共未填充的單元c(i，J，k 是： 其中，是輸入功能，代表26維重力矢量。根據相鄰單元的速率和它們相對的特性，每個組件的重力矢量設置如下： 其中，說明了相對與相鄰單元的方向，也是在相對應的位置泡沫形式的蒸發速率。從相關實驗研究中，我們發現，金屬靜止端，真空度，模型密度，澆注溫度和鑄造特性因素的工藝參數決定了。 為了這個特殊的網絡設計,輸入功能的作用是用來計算相對的界面從相鄰的單元到C運動的距離,其詳細的計算過程如下: (1) 通過相乘相應的組件的輸入量和重力矢量,一個新的26維矢量就得到了,這個累加的組件的新的矢量是: 當C(i，J，k )是空的時候， (2) 通過相加兩個組件矢量,由于填充方向相互面對,一個新的13維矢量就得到了: 如果 那么所以單元的活動狀態定義如下: 當，k=0，C(i，j，k )是空單元 當，j， ≥0，C(i，j，k )是滿單元 當， <0，C(i，j，k)是接口單元 神經元的輸出具有閾功能: 當神經元的閾值是θ是時,它等同于結網單元的邊長度: 通過C++程序語言可以實現這種算法,計算流程如圖1所示.在計算開始的時候,鑄模網絡的頂層的網格單元設置為滿(如果尖端是凹的,在頂層和入口的所有單元都設置為滿).根據這個計算程序,通過一定時間的填充,所以的單元都是滿的,這個系統就是穩定的。 2.2在模具充模過程中液體流動和溫度分布的計算 根據上面的算法,熔化模式界面的定位在任何時候都可以得到.所以在一定的計算范圍內,通過求解N-S方程和能量方程,模具充模中的液體流動和溫度分布都可以計算出來.調節方程的表示如下： 一般形式為： 其中φ是因變量,Γ代表擴散系數,?代表原條件.而且這個方程是一個連續性的方程,可以是N-S方程或者能量方程.當因變量是1或T時,各不相關.在一定的情況下,都有相應的Γ和 ?。 在N-S方程中,SOLA技術用來計算液體流動,在消失模鑄造中,邊界條件的速率與傳統的空模鑄造的速率是不相同的. 在消失模鑄造中,熔融前面的速率受到泡沫模式的速率的限制.所以前面熔化速率應該設置為泡沫模式的蒸發速率,根據熔融狀金屬和泡沫方式之間的相對方向來決定其方向.所以一個滿單元C(i，j，k )為例,如果輸出值為0,那么邊界速率設置為： 在消失模鑄造中,熔融物前面的邊界狀態下的溫度是不同與傳統空模鑄造的溫度。在消失模鑄造中,由于泡沫模式的蒸發和分解, 熔融物前面的溫度顯著劇烈.通常,我們的研究者用等效的轉換系數來處理劇烈效應。在這篇文章中,通過在熱量流與界面之間給定的關系來處理邊界情況。 3、模具強度與剛度校核 普通意義上的模具強度包括模具的強度、剛度。模具的各種成型零部件和結構零部件均有強度、剛度的要求，足夠的強度才可以保證模具能正常工作。 由于模具形式較多，計算也不盡相同且較復雜，實際生產中，采用經驗設計和強度校核相結合的方法，通過強度校核來調整設計，保證模具能正常工作。 模具強度計算較為復雜，一般采用簡化的計算方法,計算時采取保守的做法，原則是：選取最不利的受力結構形式，選用較大的安全系數，然后再優化模具結構，充分提高模具強度。為保證模具能正常工作，不僅要校核模具的整體性強度，也要校核模具局部結構的強度。 整體性強度主要針對型腔側壁厚度，型腔底板厚度，合模面所能承受的壓力等幾個方面，實際選用尺寸應大于計算尺寸并取整。校核時應從強度與彎曲兩個方面分別計算，選取較大的尺寸。 4、冷卻系統的設計與計算 注塑模的溫度對于塑料熔體的充模流動、固化成型、生產效率以及制品的形狀和尺寸精度都有影響，對于任一個塑料制品，模具溫度波動過大都是不利的。過高的模溫會使塑件在脫模后發生變形，若延長冷卻時間又會使生產率下降。過低的模溫會降低塑料的流動性，使其難于充模，增加制品的內應力和明顯的熔接痕等缺陷。由于各種塑料的性能和成型工藝要求不同，對模具溫度的要求也不相同。一般注射到模具內的塑料粉體的溫度為 左右，熔體固化成為塑件后，從 左右的模具中脫模、溫度的降低是依靠在模具內通入冷卻水，將熱量帶走。對于要求較低模溫（一般小于 ）的塑料，僅需要設置冷系統即可，因?yàn)榭梢酝ㄟ^調節水的流量就可以調節模具的溫度。 5、總結 本次模具設計課題，通過對塑件的工藝分析，確定模具的總體設計，并進行各個子系統的設計。所設計的模具能滿足其工作狀態的質量要求，使用時安全可靠，易于維修，在注塑成型時有較短的成型周期，成型后有較長的使用壽命，具有合理的模具制造工藝性。 通過以上工作，我對一套模具從設計到加工的全過程有了清醒而直觀的認識，了解了注塑模的工作原理，對模具中型腔等主要零件的設計及精度的確定具備了一定的經驗知識，能夠?qū)δ＞咴O(shè)計中常出現的問題提出了合理的解決方法，能夠正確地選取注塑機、確定模架的結構及尺寸、確定型腔數、選擇分型面、設計澆注系統、抽芯機構等。由于知識及實踐經驗的缺乏，在設計過程中，零件加工精度的確定尚存在許多不足之處，在以后的工作、學習中還有待改進。